main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm2675mx-adj-tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm2675mx-adj-tp: viewers · Ray
lm2675mx-adj-tp-etched.fit.json lm2675mx-adj-tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2675mx-adj-tp-etched.glb lm2675mx-adj-tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2675mx-adj-tp-etched.step lm2675mx-adj-tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2675mx-adj-tp.glb Publish 0.1.0 · Ray
lm2675mx-adj-tp.kicad_mod Publish 0.1.0 · Ray
lm2675mx-adj-tp.kicad_sym Publish 0.1.0 · Ray
lm2675mx-adj-tp.lbr Publish 0.1.0 · Ray
lm2675mx-adj-tp.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lm2675mx-adj-tp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lm2675mx-adj-tp: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LM2675MX-ADJ-TP

TECH PUBLIC · DC-DC Converters · SOP-8

LM2675MX-ADJ-TP from TECH PUBLIC, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected. No internal bond; leave floating or tie to a safe potential.
2 NC unconnected Not connected. No internal bond; leave floating or tie to a safe potential.
3 NC unconnected Not connected. No internal bond; leave floating or tie to a safe potential.
4 FB input Feedback input. Senses the regulated output voltage through an external resistor divider (R1/R2) to complete the feedback loop; internal reference is 1.23V. Feedback bias current typ 50nA.
5 ON/OFF input TTL-level shutdown input (active-low enable). Logic low (<=0.8V) turns the regulator ON; logic high (>=2.0V) shuts it down into low-power standby (typ 50uA). Input voltage range -0.3V to +VIN.
6 GND power_in Circuit ground return for the IC.
7 VIN power_in Positive input supply for the IC switching regulator. Recommended 6V-40V (absolute max 45V). A suitable input bypass capacitor (e.g. 100uF, 50V tantalum) must be present at this pin to minimize voltage transients and supply switching currents.
8 SW output Internal power switch output. The voltage at this pin switches between (+VIN - VSAT) and approximately -0.5V at 300kHz. Connect to the external inductor and catch (Schottky) diode. Keep the PC board copper area at this node small to minimize coupling to sensitive circuitry.

Key specifications

Parameter Value
Manufacturer TECH PUBLIC
Package SOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM2675MX-ADJ-TP

CAD (KiCad official)

  • Symbol: LM2675MX-ADJ-TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm2675mx-adj-tp-etched.step / lm2675mx-adj-tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2675mx-adj-tp.step / lm2675mx-adj-tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TECH PUBLIC datasheet (7 pp, sha256 d305a960a95531f9, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF