main
Ray
lm2674mx-5-0: laser-etched CAD + chip hero (factory 2.0.0 backfill)
d93e339
LM2674MX-5.0
Texas Instruments · DC-DC Converters · SOIC-8
LM2674MX-5.0 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | passive | Bootstrap capacitor connection for the internal high-side driver. Connect a high-quality 470-nF capacitor from CB to VSW to develop the boosted gate drive for the high-side DMOS switch. |
| 2 | NC | unconnected | No-connect pin. Leave floating or tie to a copper pour as convenient; not internally bonded to any circuit. |
| 3 | NC | unconnected | No-connect pin. Leave floating or tie to a copper pour as convenient; not internally bonded to any circuit. |
| 4 | FB | input | Feedback sense input. For the fixed 5-V version, connect this pin directly to the output capacitor (VOUT). Internal reference sets output regulation; feedback bias current is typically 85 nA (adjustable version only). |
| 5 | ON/OFF | input | Active-high enable input for the regulator. High = ON, Low = OFF. Internally pulled up to ~7 V, so the pin may be left floating for always-on operation. Turn-on threshold (rising) typically 1.4 V; input voltage range −0.1 V to 6 V. |
| 6 | GND | power_in | Power ground. Connect to system ground; the ground return of the input bypass capacitor CIN and output capacitor COUT must be as short as possible. |
| 7 | VIN | power_in | Supply input pin, also the drain of the internal high-side DMOS switch. Connect to the input supply (6.5 V to 40 V recommended, 45 V absolute max). Place a low-ESR bypass capacitor (typ. 100 µF) from VIN to GND with the shortest possible path. |
| 8 | VSW | output | Switching node - source of the internal high-side DMOS FET (RDS(on) ≈ 0.25 Ω, 500-mA rated). Connect to the power inductor and the cathode of the external freewheeling (catch) diode. Absolute-max −1 V to VIN. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LM2674MX-5.0LM2674MX-5.0MLM2674MX-5.0NLM2674MX-5.0SDLM2674MX-5.0SDX
CAD (KiCad official)
- Symbol:
LM2674MX-5.0 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm2674mx-5-0-etched.step/lm2674mx-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2674mx-5-0.step/lm2674mx-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
4bd5564fd1dd3b8a, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2674MX-5.0
**Texas Instruments** · DC-DC Converters · SOIC-8
LM2674MX-5.0 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | passive | Bootstrap capacitor connection for the internal high-side driver. Connect a high-quality 470-nF capacitor from CB to VSW to develop the boosted gate drive for the high-side DMOS switch. |
| 2 | NC | unconnected | No-connect pin. Leave floating or tie to a copper pour as convenient; not internally bonded to any circuit. |
| 3 | NC | unconnected | No-connect pin. Leave floating or tie to a copper pour as convenient; not internally bonded to any circuit. |
| 4 | FB | input | Feedback sense input. For the fixed 5-V version, connect this pin directly to the output capacitor (VOUT). Internal reference sets output regulation; feedback bias current is typically 85 nA (adjustable version only). |
| 5 | ON/OFF | input | Active-high enable input for the regulator. High = ON, Low = OFF. Internally pulled up to ~7 V, so the pin may be left floating for always-on operation. Turn-on threshold (rising) typically 1.4 V; input voltage range −0.1 V to 6 V. |
| 6 | GND | power_in | Power ground. Connect to system ground; the ground return of the input bypass capacitor CIN and output capacitor COUT must be as short as possible. |
| 7 | VIN | power_in | Supply input pin, also the drain of the internal high-side DMOS switch. Connect to the input supply (6.5 V to 40 V recommended, 45 V absolute max). Place a low-ESR bypass capacitor (typ. 100 µF) from VIN to GND with the shortest possible path. |
| 8 | VSW | output | Switching node - source of the internal high-side DMOS FET (RDS(on) ≈ 0.25 Ω, 500-mA rated). Connect to the power inductor and the cathode of the external freewheeling (catch) diode. Absolute-max −1 V to VIN. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LM2674MX-5.0`
- `LM2674MX-5.0M`
- `LM2674MX-5.0N`
- `LM2674MX-5.0SD`
- `LM2674MX-5.0SDX`
## CAD (KiCad official)
- Symbol: `LM2674MX-5.0`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `lm2674mx-5-0-etched.step` / `lm2674mx-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2674mx-5-0.step` / `lm2674mx-5-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2674mx-5.0.pdf) (35 pp, sha256 `4bd5564fd1dd3b8a`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2674mx-5-0-datasheet.pdf)