Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2674MX-12

Texas Instruments · DC-DC Converters · SOIC-8

LM2674MX-12 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CB input Bootstrap capacitor connection for the high-side driver; connect a 470-nF capacitor from CB to the VSW pin.
2 NC unconnected No-connect pin with no internal connection.
3 NC unconnected No-connect pin with no internal connection.
4 FB input Feedback sense input; connect to the feedback divider midpoint for the adjustable version or directly to the output capacitor for fixed-output versions.
5 ON/OFF input Enable input where high or floating enables the regulator and low turns it off.
6 GND power_in Power ground pin that connects to system ground, with the path to CIN kept as short as possible.
7 VIN power_in Supply input pin to the collector of the high-side FET; connect to the power supply and input bypass capacitor CIN with a short path to GND.
8 VSW output Source pin of the internal high-side FET and the switching node; attach to the inductor and the cathode of the external diode.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VOUT 11.82 12 12.18 V VIN = 15 V to 40 V, ILOAD = 20 mA to 500 mA, TJ = 25°C 5
Output voltage over temperature VOUT 11.64 12.36 V VIN = 15 V to 40 V, ILOAD = 20 mA to 500 mA, TJ = -40°C to 125°C 5
Current limit ICL 0.62 0.8 1.2 A TJ = 25°C 6
Current limit over temperature ICL 0.575 1.25 A TJ = -40°C to 125°C 6
Oscillator frequency fO 225 275 kHz Measured at switch pin, TJ = -40°C to 125°C 6
ON/OFF pin voltage threshold VS/D 0.8 1.4 2 V Turnon threshold, rising, TJ = -40°C to 125°C (typ at TJ = 25°C) 6
Output leakage current IL 1 25 µA VIN = 40 V, ON/OFF pin = 0 V, VSWITCH = 0 V 6
Output leakage current (switch reverse) IL 6 15 mA VSWITCH = -1 V, ON/OFF pin = 0 V 6
Switch ON-resistance RDS(ON) 0.25 0.4 Ω ISWITCH = 500 mA, TJ = 25°C 6
Switch ON-resistance over temperature RDS(ON) 0.6 Ω ISWITCH = 500 mA, TJ = -40°C to 125°C 6
Standby quiescent current ISTBY 50 100 µA ON/OFF pin = 0 V, TJ = 25°C 6
Standby quiescent current over temperature ISTBY 150 µA ON/OFF pin = 0 V, TJ = -40°C to 125°C 6
Quiescent current (12-V version) IQ 2.5 mA VFEEDBACK = 15 V for 12-V versions 6
Maximum duty cycle D 95 % 6
Minimum duty cycle D 0 % 6
ON/OFF pin current IS/D 7 20 37 µA ON/OFF pin = 0 V, TJ = -40°C to 125°C (typ at TJ = 25°C) 6
Efficiency η 94 % VIN = 24 V, ILOAD = 500 mA 5
Supply voltage (absolute maximum) 45 V 4
ON/OFF pin voltage VSH -0.1 6 V 4
Switch voltage to ground -1 V 4
Feedback pin voltage VFB -0.3 14 V 4
Maximum junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage (recommended) 6.5 40 V 4
Junction temperature (recommended) TJ -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 105 °C/W D (SOIC) 8-pin package 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper (2) Junction to ambient thermal resistance with approximately 1 square inch of printed-circuit board copper surrounding the leads. Additional 4

CAD (KiCad official)

  • Symbol: LM2674MX-12
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm2674mx-12-etched.step / lm2674mx-12-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2674mx-12.step / lm2674mx-12.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 6899e1e558e13f56, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF