main
Ray
Initial commit: component/lm2662m
461305c
LM2662M
Texas Instruments · Charge Pumps · SOIC-8
LM2662M from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FC | input | Frequency control for internal oscillator; FC open sets fOSC = 20 kHz (typ), FC connected to V+ sets fOSC = 150 kHz (typ). |
| 2 | CAP+ | passive | Connect to the positive terminal of charge-pump capacitor C1. |
| 3 | GND | power_in | Power supply ground input. |
| 4 | CAP− | passive | Connect to the negative terminal of charge-pump capacitor C1. |
| 5 | OUT | power_out | Negative voltage output providing inverted supply voltage with output current up to 200 mA and typical output resistance of 3.5 Ω. |
| 6 | LV | input | Low-voltage operation input; tie to GND when input voltage is less than 3.5 V; can be connected to GND or left open when input voltage is above 3.5 V. |
| 7 | OSC | input | Oscillator control input internally connected to 15-pF capacitor; accepts external capacitor to adjust oscillator frequency or external clock up to 150 kHz in inverter mode. |
| 8 | V+ | power_in | Power supply positive voltage input; operating range from 1.5 V to 5.5 V in inverter mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM2662M - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm2662m-etched.step/lm2662m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2662m.step/lm2662m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
3a994b4ab387c486, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2662M
**Texas Instruments** · Charge Pumps · SOIC-8
LM2662M from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FC | input | Frequency control for internal oscillator; FC open sets fOSC = 20 kHz (typ), FC connected to V+ sets fOSC = 150 kHz (typ). |
| 2 | CAP+ | passive | Connect to the positive terminal of charge-pump capacitor C1. |
| 3 | GND | power_in | Power supply ground input. |
| 4 | CAP− | passive | Connect to the negative terminal of charge-pump capacitor C1. |
| 5 | OUT | power_out | Negative voltage output providing inverted supply voltage with output current up to 200 mA and typical output resistance of 3.5 Ω. |
| 6 | LV | input | Low-voltage operation input; tie to GND when input voltage is less than 3.5 V; can be connected to GND or left open when input voltage is above 3.5 V. |
| 7 | OSC | input | Oscillator control input internally connected to 15-pF capacitor; accepts external capacitor to adjust oscillator frequency or external clock up to 150 kHz in inverter mode. |
| 8 | V+ | power_in | Power supply positive voltage input; operating range from 1.5 V to 5.5 V in inverter mode. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `LM2662M`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `lm2662m-etched.step` / `lm2662m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2662m.step` / `lm2662m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm2662) (29 pp, sha256 `3a994b4ab387c486`, retrieved 2026-09-24, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2662m-datasheet.pdf)