Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2660MX

Texas Instruments · DC-DC Converters · SOIC-8

LM2660MX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FC input Frequency control input for the internal oscillator. FC = open → fOSC ≈ 10 kHz; FC = V+ → fOSC ≈ 80 kHz. FC has no effect when OSC is driven externally.
2 CAP+ passive Positive terminal of the external charge-pump (flying) capacitor C1.
3 GND power_in Power-supply ground input in inverter mode. In doubler mode this pin is used as the positive supply voltage input.
4 CAP- passive Negative terminal of the external charge-pump (flying) capacitor C1.
5 OUT power_out Negative voltage output in inverter mode (-VIN). In doubler mode this pin is tied to ground and used as the supply ground input.
6 LV input Low-voltage operation input. Tie LV to GND when V+ < 3.5 V; above 3.5 V LV can be connected to GND or left open. When driving OSC with an external clock, LV must be connected to GND. In doubler mode LV must be tied to OUT.
7 OSC bidirectional Oscillator control input. OSC is connected to an internal ~15-pF capacitor; an external capacitor can be added to slow the oscillator, or an external clock up to 150 kHz can drive the pin. OSC cannot be driven externally in doubler mode.
8 V+ power_in Power-supply positive voltage input (1.5 V to 5.5 V) in inverter mode. In doubler mode this pin becomes the positive voltage output (~2×VIN).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM2660MX
  • LM2660MXM
  • LM2660MXMM
  • LM2660MXMMX

CAD (KiCad official)

  • Symbol: LM2660MX
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm2660mx-etched.step / lm2660mx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2660mx.step / lm2660mx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 57a57bac6fba6b6b, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF