main
Ray
lm26480qsq-cf: English datasheet SNVSA58C (was the translation ZHCSD82C)
d2fe95f
LM26480QSQ-CF
Texas Instruments · DC-DC Converters · WQFN-24-EP(4x4)
LM26480QSQ-CF from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VINLDO12 | power_in | Analog power for internal functions (VREF, BIAS, I2C, Logic). |
| 2 | SYNC | input | Frequency synchronization pin that allows an external clock to synchronize the internal oscillator; default OFF and must be grounded when not used. |
| 3 | NPOR | output | Open-drain nPOR power-on reset output for Buck1 and Buck2 with a 100-kΩ pullup, pulled to ground when these supplies are not good. |
| 4 | GND_SW1 | power_in | Buck1 NMOS power ground. |
| 5 | SW1 | power_out | Buck1 switcher output pin. |
| 6 | VIN1 | power_in | Power input from DC source or battery to Buck1. |
| 7 | ENSW1 | input | Enable pin for Buck1; a logic HIGH enables Buck1 and the pin cannot be left floating. |
| 8 | FB1 | input | Buck1 input feedback terminal. |
| 9 | GND_C | power_in | Non-switching core ground pin. |
| 10 | AVDD | power_in | Analog power for Buck converters. |
| 11 | FB2 | input | Buck2 input feedback terminal. |
| 12 | ENSW2 | input | Enable pin for Buck2; a logic HIGH enables Buck2 and the pin cannot be left floating. |
| 13 | VIN2 | power_in | Power input from DC source or battery to Buck2. |
| 14 | SW2 | power_out | Buck2 switcher output pin. |
| 15 | GND_SW2 | power_in | Buck2 NMOS power ground. |
| 16 | ENLDO2 | input | LDO2 enable pin; a logic HIGH enables LDO2 and the pin cannot be left floating. |
| 17 | ENLDO1 | input | LDO1 enable pin; a logic HIGH enables LDO1 and the pin cannot be left floating. |
| 18 | GND_L | power_in | LDO ground. |
| 19 | VINLDO1 | power_in | Power input from DC source or battery to LDO1. |
| 20 | LDO1 | power_out | LDO1 output. |
| 21 | FBL1 | input | LDO1 feedback terminal. |
| 22 | FBL2 | input | LDO2 feedback terminal. |
| 23 | LDO2 | power_out | LDO2 output. |
| 24 | VINLDO2 | power_in | Power input from DC source or battery to LDO2. |
| 25 | DAP | power_in | Connection is not necessary for electrical performance but is recommended for better thermal dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-24-EP(4x4) |
| Category | Power Supply Chip |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operational voltage range VINLDO1 and VINLDO2 | 1.74 | 5.5 | V | TJ = −40°C to 125°C | 6 | ||
| Input voltage VIN (Bucks) | VIN | 2.8 | 5.5 | V | 5 | ||
| Junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Absolute maximum voltage on VINLDO12, VIN1, AVDD, VIN2, VINLDO1, VINLDO2, ENSW1, FB1, FB2, ENSW2, ENLDO1, ENLDO2, SYNC, FBL1, FBL2 | -0.3 | 6 | V | Voltages with respect to GND | 5 | ||
| GND to GND SLUG | -0.3 | 0.3 | V | 5 | |||
| Power dissipation PD_MAX | PD_MAX | 1.17 | W | TA = 85°C, TMAX = 125°C | 5 | ||
| Junction temperature TJ-MAX | TJ-MAX | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| FB voltage accuracy (LDO) | VFB | -3 | 3 | % | TJ = −40°C to 125°C | 6 | |
| Feedback voltage (Buck) | VFB | -3 | 3 | % | 7 | ||
| Dropout voltage | VIN, VOUT | 25 | mV | Load current = 50 mA | 6 | ||
| Dropout voltage | VIN, VOUT | 200 | mV | TJ = −40°C to 125°C | 6 | ||
| Line regulation (LDO) | ΔVOUT | 0.15 | %/V | VIN = (VOUT + 0.3 V) to 5 V; Load current = 1 mA; TJ = −40°C to 125°C | 6 | ||
| Load regulation (LDO) | ΔVOUT | 0.011 | %/mA | VIN = 3.6 V, TJ = −40°C to 125°C; Load current = 1 mA to IMAX | 6 | ||
| Quiescent current on (LDO) | IQ | 40 | µA | IOUT = 0 mA | 6 | ||
| Quiescent current on (LDO) | IQ | 150 | µA | IOUT = 0 mA, −40°C ≤ TJ ≤ 125°C | 6 | ||
| Quiescent current on (LDO) | IQ | 60 | µA | IOUT = 300 mA | 6 | ||
| Quiescent current on (LDO) | IQ | 200 | µA | IOUT = 300 mA, −40°C ≤ TJ ≤ 125°C | 6 | ||
| Quiescent current off (LDO) | IQ | 0.03 | 1 | µA | EN is de-asserted | 6 | |
| Output capacitor (LDO) capacitance for stability | COUT | 0.33 | µF | −40°C ≤ TJ ≤ 125°C | 7 | ||
| Output capacitor (LDO) ESR | ESR | 5 | 500 | mΩ | TJ = −40°C to 125°C | 7 | |
| Shutdown supply current (VINLDO12) | IQ | 0.5 | µA | VIN = 3.6 V | 6 | ||
| Line regulation (Buck) | VOUT | 0.089 | %/V | 2.8 V < VIN < 5.5 V; IOUT = 10 mA | 7 | ||
| Load regulation (Buck) | VOUT | 0.0013 | %/mA | 100 mA < IOUT < IMAX | 7 | ||
| Internal oscillator frequency (default 2.1 MHz) | ƒOSC | 2.1 | 2.5 | MHz | Default oscillator frequency = 2.1 MHz | 7 | |
| Internal oscillator frequency (default 2.1 MHz) | ƒOSC | 1.7 | MHz | Default oscillator frequency = 2.1 MHz, TJ = −40°C to 125°C | 7 | ||
| Buck1 peak switching current limit | IPEAK | 2 | 2.4 | A | 7 | ||
| Buck2 peak switching current limit | IPEAK | 2 | 2.4 | A | 7 | ||
| Shutdown supply current (Buck) | ISHDN | 0.01 | 1 | µA | EN is de-asserted | 7 | |
| Quiescent current on (Buck), PFM mode | IQ | 33 | µA | No load PFM mode | 7 | ||
| Quiescent current on (Buck), PWM mode | IQ | 2 | mA | No load PWM mode (forced PWM) | 7 | ||
| Pin-pin resistance PFET | RDSON(P) | 200 | 400 | mΩ | 7 | ||
| Pin-pin resistance NFET | RDSON(N) | 180 | 400 | mΩ | 7 | ||
| Efficiency | Eff | 96 | % | Load current = 250 mA | 7 | ||
| Input capacitor CIN | CIN | 10 | µF | Capacitance for stability | 7 | ||
| Output capacitor COUT | COUT | 10 | µF | Capacitance for stability | 7 | ||
| Input low level | VIL | 0.4 | V | 8 | |||
| Output level low | VOL | 0.23 | 0.5 | V | Load = IOL = 500 µA | 8 | |
| nPOR power-on reset delay (default) | 60 | ms | Default = 60 ms | 8 | |||
| Junction-to-ambient thermal resistance | RθJA | 32.7 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 31.2 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 11.2 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 0.2 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 11.2 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 0.4 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 3. Connect the ground pins of the buck, and filter capacitors together using generous component-side copper | 31 |
CAD (KiCad official)
- Symbol:
LM26480QSQ-CF - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lm26480qsq-cf-etched.step/lm26480qsq-cf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm26480qsq-cf.step/lm26480qsq-cf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet, copy hosted by LCSC (41 pp, sha256
4f0d00e132e01d5c, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM26480QSQ-CF
**Texas Instruments** · DC-DC Converters · WQFN-24-EP(4x4)
LM26480QSQ-CF from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VINLDO12 | power_in | Analog power for internal functions (VREF, BIAS, I2C, Logic). |
| 2 | SYNC | input | Frequency synchronization pin that allows an external clock to synchronize the internal oscillator; default OFF and must be grounded when not used. |
| 3 | NPOR | output | Open-drain nPOR power-on reset output for Buck1 and Buck2 with a 100-kΩ pullup, pulled to ground when these supplies are not good. |
| 4 | GND_SW1 | power_in | Buck1 NMOS power ground. |
| 5 | SW1 | power_out | Buck1 switcher output pin. |
| 6 | VIN1 | power_in | Power input from DC source or battery to Buck1. |
| 7 | ENSW1 | input | Enable pin for Buck1; a logic HIGH enables Buck1 and the pin cannot be left floating. |
| 8 | FB1 | input | Buck1 input feedback terminal. |
| 9 | GND_C | power_in | Non-switching core ground pin. |
| 10 | AVDD | power_in | Analog power for Buck converters. |
| 11 | FB2 | input | Buck2 input feedback terminal. |
| 12 | ENSW2 | input | Enable pin for Buck2; a logic HIGH enables Buck2 and the pin cannot be left floating. |
| 13 | VIN2 | power_in | Power input from DC source or battery to Buck2. |
| 14 | SW2 | power_out | Buck2 switcher output pin. |
| 15 | GND_SW2 | power_in | Buck2 NMOS power ground. |
| 16 | ENLDO2 | input | LDO2 enable pin; a logic HIGH enables LDO2 and the pin cannot be left floating. |
| 17 | ENLDO1 | input | LDO1 enable pin; a logic HIGH enables LDO1 and the pin cannot be left floating. |
| 18 | GND_L | power_in | LDO ground. |
| 19 | VINLDO1 | power_in | Power input from DC source or battery to LDO1. |
| 20 | LDO1 | power_out | LDO1 output. |
| 21 | FBL1 | input | LDO1 feedback terminal. |
| 22 | FBL2 | input | LDO2 feedback terminal. |
| 23 | LDO2 | power_out | LDO2 output. |
| 24 | VINLDO2 | power_in | Power input from DC source or battery to LDO2. |
| 25 | DAP | power_in | Connection is not necessary for electrical performance but is recommended for better thermal dissipation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-24-EP(4x4) |
| Category | Power Supply Chip |
| Pins | 25 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operational voltage range VINLDO1 and VINLDO2 | | 1.74 | | 5.5 | V | TJ = −40°C to 125°C | 6 |
| Input voltage VIN (Bucks) | VIN | 2.8 | | 5.5 | V | | 5 |
| Junction temperature | TJ | -40 | | 125 | °C | | 5 |
| Ambient temperature | TA | -40 | | 125 | °C | | 5 |
| Absolute maximum voltage on VINLDO12, VIN1, AVDD, VIN2, VINLDO1, VINLDO2, ENSW1, FB1, FB2, ENSW2, ENLDO1, ENLDO2, SYNC, FBL1, FBL2 | | -0.3 | | 6 | V | Voltages with respect to GND | 5 |
| GND to GND SLUG | | -0.3 | | 0.3 | V | | 5 |
| Power dissipation PD_MAX | PD_MAX | | | 1.17 | W | TA = 85°C, TMAX = 125°C | 5 |
| Junction temperature TJ-MAX | TJ-MAX | | | 150 | °C | | 5 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |
| FB voltage accuracy (LDO) | VFB | -3 | | 3 | % | TJ = −40°C to 125°C | 6 |
| Feedback voltage (Buck) | VFB | -3 | | 3 | % | | 7 |
| Dropout voltage | VIN, VOUT | | 25 | | mV | Load current = 50 mA | 6 |
| Dropout voltage | VIN, VOUT | | | 200 | mV | TJ = −40°C to 125°C | 6 |
| Line regulation (LDO) | ΔVOUT | | | 0.15 | %/V | VIN = (VOUT + 0.3 V) to 5 V; Load current = 1 mA; TJ = −40°C to 125°C | 6 |
| Load regulation (LDO) | ΔVOUT | | | 0.011 | %/mA | VIN = 3.6 V, TJ = −40°C to 125°C; Load current = 1 mA to IMAX | 6 |
| Quiescent current on (LDO) | IQ | | 40 | | µA | IOUT = 0 mA | 6 |
| Quiescent current on (LDO) | IQ | | | 150 | µA | IOUT = 0 mA, −40°C ≤ TJ ≤ 125°C | 6 |
| Quiescent current on (LDO) | IQ | | 60 | | µA | IOUT = 300 mA | 6 |
| Quiescent current on (LDO) | IQ | | | 200 | µA | IOUT = 300 mA, −40°C ≤ TJ ≤ 125°C | 6 |
| Quiescent current off (LDO) | IQ | | 0.03 | 1 | µA | EN is de-asserted | 6 |
| Output capacitor (LDO) capacitance for stability | COUT | 0.33 | | | µF | −40°C ≤ TJ ≤ 125°C | 7 |
| Output capacitor (LDO) ESR | ESR | 5 | | 500 | mΩ | TJ = −40°C to 125°C | 7 |
| Shutdown supply current (VINLDO12) | IQ | | | 0.5 | µA | VIN = 3.6 V | 6 |
| Line regulation (Buck) | VOUT | | | 0.089 | %/V | 2.8 V < VIN < 5.5 V; IOUT = 10 mA | 7 |
| Load regulation (Buck) | VOUT | | | 0.0013 | %/mA | 100 mA < IOUT < IMAX | 7 |
| Internal oscillator frequency (default 2.1 MHz) | ƒOSC | 2.1 | | 2.5 | MHz | Default oscillator frequency = 2.1 MHz | 7 |
| Internal oscillator frequency (default 2.1 MHz) | ƒOSC | 1.7 | | | MHz | Default oscillator frequency = 2.1 MHz, TJ = −40°C to 125°C | 7 |
| Buck1 peak switching current limit | IPEAK | | 2 | 2.4 | A | | 7 |
| Buck2 peak switching current limit | IPEAK | | 2 | 2.4 | A | | 7 |
| Shutdown supply current (Buck) | ISHDN | | 0.01 | 1 | µA | EN is de-asserted | 7 |
| Quiescent current on (Buck), PFM mode | IQ | | 33 | | µA | No load PFM mode | 7 |
| Quiescent current on (Buck), PWM mode | IQ | | 2 | | mA | No load PWM mode (forced PWM) | 7 |
| Pin-pin resistance PFET | RDSON(P) | | 200 | 400 | mΩ | | 7 |
| Pin-pin resistance NFET | RDSON(N) | | 180 | 400 | mΩ | | 7 |
| Efficiency | Eff | | 96 | | % | Load current = 250 mA | 7 |
| Input capacitor CIN | CIN | | 10 | | µF | Capacitance for stability | 7 |
| Output capacitor COUT | COUT | | 10 | | µF | Capacitance for stability | 7 |
| Input low level | VIL | | | 0.4 | V | | 8 |
| Output level low | VOL | | 0.23 | 0.5 | V | Load = IOL = 500 µA | 8 |
| nPOR power-on reset delay (default) | | | 60 | | ms | Default = 60 ms | 8 |
| Junction-to-ambient thermal resistance | RθJA | | 32.7 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 31.2 | | °C/W | | 5 |
| Junction-to-board thermal resistance | RθJB | | 11.2 | | °C/W | | 5 |
| Junction-to-top characterization parameter | ψJT | | 0.2 | | °C/W | | 5 |
| Junction-to-board characterization parameter | ψJB | | 11.2 | | °C/W | | 5 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 0.4 | | °C/W | | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | 3. Connect the ground pins of the buck, and filter capacitors together using generous component-side copper | 31 |
## CAD (KiCad official)
- Symbol: `LM26480QSQ-CF`
- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`
- 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files: `lm26480qsq-cf-etched.step` / `lm26480qsq-cf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm26480qsq-cf.step` / `lm26480qsq-cf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet, copy hosted by LCSC](docs/lm26480qsq-cf-datasheet.pdf) (41 pp, sha256 `4f0d00e132e01d5c`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm26480qsq-cf-datasheet.pdf)