main
History Download
Ray Initial commit: component/lm2623ammx b054db9

LM2623AMMX

Texas Instruments · DC-DC Converters · VSSOP-8-0.65mm

LM2623AMMX from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground connection for output stage; reference potential for output power dissipation path
2 EN input Digital active-low shutdown control input; device operates in normal mode above 0.7 VDD and enters shutdown below 0.15 VDD
3 FREQ input Frequency adjust input pin; external resistor connected between this pin and voltage source sets switching frequency from 300 kHz to 2 MHz
4 FB input Output voltage feedback input; feedback threshold is 1.24 V nominal, ranging from 1.2028 V to 1.2772 V over -40 °C to 85 °C temperature range
5 SGND power_in Signal ground reference potential for internal control and feedback circuitry
6 VDD power_in Power supply input for internal circuitry; operating voltage range 3 V to 5 V per recommended operating conditions
7 BOOT power_out Bootstrap supply output for the internal gate drive of the MOSFET power switch
8 SW output Drain of internal MOSFET power switch; switching node that connects to external inductor and Schottky diode in boost topology

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LM2623AMMX
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: lm2623ammx-etched.step / lm2623ammx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2623ammx.step / lm2623ammx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 2be194644bb431a9, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF