← Commit history
README.md+54−10
@@ -2,17 +2,18 @@  **Texas Instruments** · DC-DC Converters · TO-263-5 -LM2596SX-ADJ from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+LM2596SX-ADJ from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---| | 1 | VIN | power_in | Unregulated DC input supply, 4.5 V to 40 V (45 V absolute max). Bypass with a low-ESR bulk capacitor (e.g. 680 µF) close to the pin to handle the switching current. |-| 2 | Output | output | Switching output from the internal power switch. Connects to the catch diode cathode and the input side of the output inductor. Drives up to 3 A at the switching frequency of 150 kHz. |-| 3 | GND | power_in | Device ground reference. Also tied internally to the exposed metal tab of the TO-263 package for heat sinking. |+| 2 | Output | power_out | Switching output from the internal power switch. Connects to the catch diode cathode and the input side of the output inductor. Drives up to 3 A at the switching frequency of 150 kHz. |+| 3 | Ground | power_in | Ground | | 4 | Feedback | input | Feedback sense input for the internal error amplifier. Regulates the pin to VFB = 1.230 V (typ) via an external resistor divider from VOUT that sets the output voltage from 1.2 V to 37 V. Absolute range −0.3 V to +25 V; input bias current ~10 nA (50 nA max). | | 5 | ON/OFF | input | Active-low TTL shutdown input. Pull LOW (<0.6 V) to enable regulation; drive HIGH (>2.0 V, up to 25 V) to place the device in standby (~80 µA typ, 250 µA max). Tie directly to GND if the shutdown function is unused. |+| 6 | GND | power_in | Package tab (pad 6). printed: Metal Tab GND (Figure 6-2). |  ## Key specifications @@ -21,15 +22,58 @@ LM2596SX-ADJ from Texas Instruments, in a TO-263-5. Pinout and pin descriptions | Manufacturer | Texas Instruments | | Package | TO-263-5 | | Category | PMIC |-| Pins | 5 |+| Pins | 6 | -## Ordering variants+## Electrical characteristics -Same part, different packaging or reel option.+Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data). -- `LM2596SX-ADJ`-- `LM2596SX-ADJS`-- `LM2596SX-ADJT`+| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Feedback voltage (VOUT programmed for 3 V), TJ = 25°C | VFB | 1.193 | 1.23 | 1.267 | V | 4.5 V ≤ VIN ≤ 40 V, 0.2 A ≤ ILOAD ≤ 3 A, VOUT programmed for 3 V; TJ = 25°C | 6 |+| Feedback voltage (VOUT programmed for 3 V), -40°C to 125°C | VFB | 1.18 |  | 1.28 | V | 4.5 V ≤ VIN ≤ 40 V, 0.2 A ≤ ILOAD ≤ 3 A, VOUT programmed for 3 V; -40°C ≤ TJ ≤ 125°C | 6 |+| Feedback bias current, TJ = 25°C | Ib |  | 10 | 50 | nA | Adjustable version only, VFB = 1.3 V; TJ = 25°C | 7 |+| Feedback bias current, -40°C to 125°C | Ib |  |  | 100 | nA | Adjustable version only, VFB = 1.3 V; -40°C ≤ TJ ≤ 125°C | 7 |+| Oscillator frequency, TJ = 25°C | fO | 127 | 150 | 173 | kHz | TJ = 25°C | 7 |+| Oscillator frequency, -40°C to 125°C | fO | 110 |  | 173 | kHz | -40°C ≤ TJ ≤ 125°C | 7 |+| Saturation voltage, TJ = 25°C | VSAT |  | 1.16 | 1.4 | V | IOUT = 3 A; TJ = 25°C | 7 |+| Saturation voltage, -40°C to 125°C | VSAT |  |  | 1.5 | V | IOUT = 3 A; -40°C ≤ TJ ≤ 125°C | 7 |+| Max duty cycle (ON) | DC |  |  | 100 | % | See note (5) | 7 |+| Min duty cycle (OFF) | DC | 0 |  |  | % | See note (6) | 7 |+| Current limit (peak current), TJ = 25°C | ICL | 3.6 | 4.5 | 6.9 | A | Peak current; TJ = 25°C; see notes (4)(5) | 7 |+| Current limit (peak current), -40°C to 125°C | ICL | 3.4 |  | 7.5 | A | Peak current; -40°C ≤ TJ ≤ 125°C; see notes (4)(5) | 7 |+| Output leakage current | IL |  |  | 50 | μA | Output = 0 V, VIN = 40 V | 7 |+| Output leakage current | IL |  | 2 | 30 | mA | Output = -1 V | 7 |+| Operating quiescent current | IQ |  | 5 | 10 | mA | See note (6) | 7 |+| Standby quiescent current, TJ = 25°C | ISTBY |  | 80 | 200 | μA | ON/OFF pin = 5 V (OFF); TJ = 25°C | 7 |+| Standby quiescent current, -40°C to 125°C | ISTBY |  |  | 250 | μA | ON/OFF pin = 5 V (OFF); -40°C ≤ TJ ≤ 125°C | 7 |+| ON/OFF pin logic input threshold, Low (regulator ON), -40°C to 125°C | VIH | 0.6 |  |  | V | Low (regulator ON); -40°C ≤ TJ ≤ 125°C | 7 |+| ON/OFF pin logic input threshold, High (regulator OFF), -40°C to 125°C | VIL |  |  | 2 | V | High (regulator OFF); -40°C ≤ TJ ≤ 125°C | 7 |+| ON/OFF pin input current, regulator OFF | IH |  | 5 | 15 | μA | VLOGIC = 2.5 V (regulator OFF) | 7 |+| ON/OFF pin input current, regulator ON | IL |  | 0.02 | 5 | μA | VLOGIC = 0.5 V (regulator ON) | 7 |+| Supply voltage | VIN | 4.5 |  | 40 | V |  | 5 |+| Operating free-air temperature | TA | -40 |  | 125 | °C |  | 5 |+| Maximum supply voltage | VIN |  |  | 45 | V |  | 5 |+| SD/SS pin input voltage |  |  |  | 6 | V | Voltage internally clamped; if clamp voltage is exceeded, limit current to 1 mA max | 5 |+| Delay pin voltage |  |  |  | 1.5 | V | Voltage internally clamped; if clamp voltage is exceeded, limit current to 1 mA max | 5 |+| Flag pin voltage |  | -0.3 |  | 45 | V |  | 5 |+| Feedback pin voltage |  | -0.3 |  | 25 | V |  | 5 |+| Output voltage to ground, steady-state |  | -1 |  |  | V | Steady-state | 5 |+| Lead temperature, vapor phase (60 s), KTW package |  |  |  | 215 | °C | KTW package, vapor phase (60 s) | 5 |+| Lead temperature, infrared (10 s), KTW package |  |  |  | 245 | °C | KTW package, infrared (10 s) | 5 |+| Maximum junction temperature | TJ |  |  | 150 | °C |  | 5 |+| Storage temperature | Tstg | -65 |  | 150 | °C |  | 5 |+| Junction-to-ambient thermal resistance, TO-263 tab on single-sided PCB, 0.5 in² 1-oz copper | RθJA |  | 50 |  | °C/W | KTW (TO-263); note (5) | 5 |+| Junction-to-ambient thermal resistance, TO-263 tab on single-sided PCB, 2.5 in² 1-oz copper | RθJA |  | 30 |  | °C/W | KTW (TO-263); note (6) | 6 |+| Junction-to-case (top) thermal resistance | RθJC(top) |  | 2 |  | °C/W | KTW (TO-263) | 5 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| contacts | copper |  | circuitry, the PCB copper area connected to this pin must be kept to a minimum. | 4 |  ## CAD (KiCad official) @@ -42,7 +86,7 @@ Same part, different packaging or reel option.  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2596sx-adj.pdf) (42 pp, sha256 `fb1a427d7e1fb607`, retrieved 2026-08-17, tier: manufacturer)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2596.pdf) (47 pp, sha256 `2eec90879908cf71`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/lm2596sx-adj-datasheet.pdf
⋯ 1 unchanged line ⋯
lm2596sx-adj-hero.glbadded
⋯ 1 unchanged line ⋯
lm2596sx-adj-hero.overlay.jsonadded+221
@@ -0,0 +1,221 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LM2596SX-ADJ",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 6,+   "span_mm": 18.55,+   "dash_mm": 0.45,+   "gap_mm": 0.27,+   "pad_stroke_mm": 0.09+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 5,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 6,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": false,+  "tolerance_mm": 1.292,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -9.375,+   5.625,+   -5.0,+   5.0+  ],+  "pads_bbox_mm": [+   -9.95,+   6.2,+   -5.4,+   5.4+  ],+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "lm2596sx-adj-etched.glb",+  "glb_sha256": "7b56186407ca6aad498cb7d0f9b1dd72775ae155a6428a293c4a04f07320265e",+  "footprint": "lm2596sx-adj.kicad_mod",+  "footprint_sha256": "77e8ff2d643255fc031e8ef2fb2e1370da8d761533c9dbe297fa1c83bed6ffcb",+  "pins": "page.json component.pins",+  "pins_sha256": "3e206dd67b7ddb4364ed7f2ca8d7baebbf0d3df3265c7ebd42903013f1fe88e5"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "VIN",+   "x": -10.1,+   "y": -3.4,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "Output",+   "x": -10.1,+   "y": -1.7,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "Ground",+   "x": -10.1,+   "y": 0.0,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "Feedback",+   "x": -10.1,+   "y": 1.7,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "ON/OFF",+   "x": -10.1,+   "y": 3.4,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "GND",+   "x": 6.35,+   "y": 0.0,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    -3.4+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    -1.7+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    0.0+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    1.7+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    3.4+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    1.5,+    0.0+   ],+   "size_mm": [+    9.4,+    10.8+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
lm2596sx-adj.kicad_sym+6−2
@@ -12,14 +12,18 @@       (name "VIN" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )-    (pin output line (at -17.78 0.00 0) (length 5.08)+    (pin power_out line (at -17.78 0.00 0) (length 5.08)       (name "Output" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )     (pin power_in line (at -17.78 -2.54 0) (length 5.08)-      (name "GND" (effects (font (size 1.27 1.27))))+      (name "Ground" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )+    (pin power_in line (at 17.78 2.54 180) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )     (pin input line (at 17.78 0.00 180) (length 5.08)       (name "ON/OFF" (effects (font (size 1.27 1.27))))       (number "5" (effects (font (size 1.27 1.27))))
lm2596sx-adj.lbr+5−3
@@ -59,7 +59,7 @@   <smd name="3" x="-7.6500" y="-0.0000" dx="4.6000" dy="1.1000" layer="1" roundness="45"/>   <smd name="4" x="-7.6500" y="-1.7000" dx="4.6000" dy="1.1000" layer="1" roundness="45"/>   <smd name="5" x="-7.6500" y="-3.4000" dx="4.6000" dy="1.1000" layer="1" roundness="45"/>-  <smd name="6" x="1.5000" y="-0.0000" dx="9.4000" dy="10.8000" layer="1" roundness="5"/>+  <smd name="6" x="1.5000" y="-0.0000" dx="9.4000" dy="10.8000" layer="1" roundness="5" cream="no"/>   <polygon width="0.1200" layer="21">     <vertex x="-7.6500" y="4.2100"/>     <vertex x="-7.9900" y="4.6800"/>@@ -108,7 +108,8 @@   <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>   <pin name="VIN" x="-17.78" y="2.54" length="middle" direction="pwr"/>   <pin name="Output" x="-17.78" y="0" length="middle" direction="out"/>-  <pin name="GND" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+  <pin name="Ground" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+  <pin name="GND" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>   <pin name="ON/OFF" x="17.78" y="0" length="middle" direction="in" rot="R180"/>   <pin name="Feedback" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/> </symbol>@@ -124,7 +125,8 @@       <connects>         <connect gate="G$1" pin="VIN" pad="1"/>         <connect gate="G$1" pin="Output" pad="2"/>-        <connect gate="G$1" pin="GND" pad="3"/>+        <connect gate="G$1" pin="Ground" pad="3"/>+        <connect gate="G$1" pin="GND" pad="6"/>         <connect gate="G$1" pin="ON/OFF" pad="5"/>         <connect gate="G$1" pin="Feedback" pad="4"/>       </connects>
package.json+142−6
@@ -1,12 +1,14 @@ {   "slug": "lm2596sx-adj",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",-  "description": "Texas Instruments DC-DC Converters, TO-263-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "Texas Instruments DC-DC Converters, TO-263-5. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "pmic",-    "lm2596sx-adj"+    "lm2596sx-adj",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -24,6 +26,140 @@     "docs/hero.png",     "docs/lm2596sx-adj-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "lm2596sx-adj-hero.glb",+    "lm2596sx-adj-hero.overlay.json"+  ],+  "component": {+    "mpn": "LM2596SX-ADJ",+    "manufacturer": "Texas Instruments",+    "package": "TO-263-5",+    "pin_count": 6,+    "category": "PMIC",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lm2596.pdf",+    "parts": {+      "symbol": "lm2596sx-adj.kicad_sym",+      "footprint": "lm2596sx-adj.kicad_mod",+      "model_3d": "lm2596sx-adj-hero.glb",+      "model_3d_plain": "lm2596sx-adj.glb",+      "model_3d_step": "lm2596sx-adj-etched.step",+      "model_3d_step_plain": "lm2596sx-adj.step",+      "lbr": "lm2596sx-adj.lbr"+    },+    "distributor_links": {+      "digikey": "LM2596SX-ADJ-ND",+      "mouser": "926-LM2596SX-ADJ"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T06:36:06Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "LM2596SX-ADJ-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "926-LM2596SX-ADJ",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Unregulated DC input supply, 4.5 V to 40 V (45 V absolute max). Bypass with a low-ESR bulk capacitor (e.g. 680 µF) close to the pin to handle the switching current."+      },+      {+        "number": "2",+        "name": "Output",+        "type": "power_out",+        "description": "Switching output from the internal power switch. Connects to the catch diode cathode and the input side of the output inductor. Drives up to 3 A at the switching frequency of 150 kHz."+      },+      {+        "number": "3",+        "name": "Ground",+        "type": "power_in",+        "description": "Ground"+      },+      {+        "number": "4",+        "name": "Feedback",+        "type": "input",+        "description": "Feedback sense input for the internal error amplifier. Regulates the pin to VFB = 1.230 V (typ) via an external resistor divider from VOUT that sets the output voltage from 1.2 V to 37 V. Absolute range −0.3 V to +25 V; input bias current ~10 nA (50 nA max)."+      },+      {+        "number": "5",+        "name": "ON/OFF",+        "type": "input",+        "description": "Active-low TTL shutdown input. Pull LOW (<0.6 V) to enable regulation; drive HIGH (>2.0 V, up to 25 V) to place the device in standby (~80 µA typ, 250 µA max). Tie directly to GND if the shutdown function is unused."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Package tab (pad 6). printed: Metal Tab GND (Figure 6-2)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/lm2596.pdf",+        "pages": 47,+        "sha256": "2eec90879908cf71",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 6,+        "described": 6,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "lm2596sx-adj.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "94c2a3dc1aaad85b6b5193f97d9a7c61b4e28bac25952a1e629557bcf747e246",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm2596sx-adj-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f5b01425d8fc911d84a6ca257ec245fa3bac73f9a25493dbbe62c9ab77717a01",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}
page.json+56−31
@@ -4,31 +4,48 @@   "slug": "lm2596sx-adj",   "title": "LM2596SX-ADJ",   "brief": "Texas Instruments DC-DC Converters, TO-263-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.2.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",-    "lm2596sx-adj"+    "lm2596sx-adj",+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "LM2596SX-ADJ",     "manufacturer": "Texas Instruments",     "package": "TO-263-5",-    "pin_count": 5,+    "pin_count": 6,     "category": "PMIC",     "subcategory": "DC-DC Converters",-    "datasheet": "https://www.ti.com/lit/ds/symlink/lm2596sx-adj.pdf",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lm2596.pdf",     "parts": {       "symbol": "lm2596sx-adj.kicad_sym",       "footprint": "lm2596sx-adj.kicad_mod",-      "model_3d": "lm2596sx-adj-etched.glb",+      "model_3d": "lm2596sx-adj-hero.glb",       "model_3d_plain": "lm2596sx-adj.glb",       "model_3d_step": "lm2596sx-adj-etched.step",       "model_3d_step_plain": "lm2596sx-adj.step",       "lbr": "lm2596sx-adj.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "digikey": "LM2596SX-ADJ-ND",+      "mouser": "926-LM2596SX-ADJ"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T06:36:06Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "LM2596SX-ADJ-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "926-LM2596SX-ADJ",+        "status": "found"+      }+    },     "pins": [       {         "number": "1",@@ -39,14 +56,14 @@       {         "number": "2",         "name": "Output",-        "type": "output",+        "type": "power_out",         "description": "Switching output from the internal power switch. Connects to the catch diode cathode and the input side of the output inductor. Drives up to 3 A at the switching frequency of 150 kHz."       },       {         "number": "3",-        "name": "GND",+        "name": "Ground",         "type": "power_in",-        "description": "Device ground reference. Also tied internally to the exposed metal tab of the TO-263 package for heat sinking."+        "description": "Ground"       },       {         "number": "4",@@ -59,20 +76,26 @@         "name": "ON/OFF",         "type": "input",         "description": "Active-low TTL shutdown input. Pull LOW (<0.6 V) to enable regulation; drive HIGH (>2.0 V, up to 25 V) to place the device in standby (~80 µA typ, 250 µA max). Tie directly to GND if the shutdown function is unused."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Package tab (pad 6). printed: Metal Tab GND (Figure 6-2)."       }     ],     "provenance": {       "extractor": "ds2sf",       "datasheet": {-        "url": "https://www.ti.com/lit/ds/symlink/lm2596sx-adj.pdf",-        "pages": 42,-        "sha256": "fb1a427d7e1fb607",+        "url": "https://www.ti.com/lit/ds/symlink/lm2596.pdf",+        "pages": 47,+        "sha256": "2eec90879908cf71",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {-        "total": 5,-        "described": 5,+        "total": 6,+        "described": 6,         "cites_pages": true,         "refuses_to_fabricate": true       }@@ -90,15 +113,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          15.0,-          10.0,+          15,+          10,           4.42         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "94c2a3dc1aaad85b6b5193f97d9a7c61b4e28bac25952a1e629557bcf747e246",-        "checked": "2026-10-07",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -109,15 +132,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          15.0,-          10.0,+          15,+          10,           4.42         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "a39e12717400f7cbc26a7a6064cb8223a954a96d51c92aa76e9994bc987bda67",-        "checked": "2026-10-16",+        "sha256": "f5b01425d8fc911d84a6ca257ec245fa3bac73f9a25493dbbe62c9ab77717a01",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -175,10 +198,12 @@     "docs/hero.png",     "docs/lm2596sx-adj-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "lm2596sx-adj-hero.glb",+    "lm2596sx-adj-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },-  "updated_at": "2026-09-28T16:16:11.229Z"-}+  "visibility": "public",+  "updated_at": "2026-09-28T16:16:11.229Z",+  "description": "Texas Instruments DC-DC Converters, TO-263-5. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LM2596SX-ADJ footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-10.600 -6.050 17.450 12.100' style='width:100%;height:100%'><line class='ly-silk' x1='-4.825' y1='-5.200' x2='-4.825' y2='-4.250' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-4.825' y1='5.200' x2='-4.825' y2='4.250' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-3.460' y1='-5.200' x2='-4.825' y2='-5.200' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-3.460' y1='5.200' x2='-4.825' y2='5.200' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-fab' x1='-9.325' y1='-3.800' x2='-9.325' y2='-3.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-3.000' x2='-4.625' y2='-3.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-2.100' x2='-9.325' y2='-1.300' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-1.300' x2='-4.625' y2='-1.300' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-0.400' x2='-9.325' y2='0.400' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='0.400' x2='-4.625' y2='0.400' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='1.300' x2='-9.325' y2='2.100' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='2.100' x2='-4.625' y2='2.100' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='3.000' x2='-9.325' y2='3.800' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='3.800' x2='-4.625' y2='3.800' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='-3.800' x2='-9.325' y2='-3.800' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='-2.100' x2='-9.325' y2='-2.100' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='-0.400' x2='-9.325' y2='-0.400' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='1.300' x2='-9.325' y2='1.300' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='3.000' x2='-9.325' y2='3.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='4.625' y1='-5.000' x2='5.625' y2='-5.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='5.625' y1='-5.000' x2='5.625' y2='5.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='5.625' y1='5.000' x2='4.625' y2='5.000' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-courtyard' x='-10.200' y='-5.650' width='16.650' height='11.300' fill='none' stroke='#4ade80' stroke-width='0.050'/><polygon class='ly-silk' points='-7.650,-4.210 -7.990,-4.680 -7.310,-4.680' fill='#d8b4fe' stroke='none'/><polygon class='ly-fab' points='4.625,-5.000 4.625,5.000 -4.625,5.000 -4.625,-4.000 -3.625,-5.000' fill='none' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-copper pad' data-num='' data-name='' x='-3.200' y='-5.400' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.925' y='-2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='-3.200' y='0.150' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.925' y='2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='1.650' y='-5.400' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.925' y='-2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='1.650' y='0.150' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.925' y='2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='1' data-name='VIN' x='-9.950' y='-3.950' width='4.600' height='1.100' rx='0.275' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='-3.400' font-size='0.660' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='Output' x='-9.950' y='-2.250' width='4.600' height='1.100' rx='0.275' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='-1.700' font-size='0.660' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='GND' x='-9.950' y='-0.550' width='4.600' height='1.100' rx='0.275' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='0.000' font-size='0.660' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text><rect class='ly-copper pad' data-num='4' data-name='Feedback' x='-9.950' y='1.150' width='4.600' height='1.100' rx='0.275' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='1.700' font-size='0.660' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>4</text><rect class='ly-copper pad' data-num='5' data-name='ON/OFF' x='-9.950' y='2.850' width='4.600' height='1.100' rx='0.275' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='3.400' font-size='0.660' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>5</text><rect class='ly-copper pad' data-num='6' data-name='' x='-3.200' y='-5.400' width='9.400' height='10.800' rx='2.350' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='1.500' y='0.000' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>6</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/LM2596SX-ADJ", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"Output","number":"2","type":""},{"desc":"","name":"GND","number":"3","type":""},{"desc":"","name":"ON/OFF","number":"5","type":""},{"desc":"","name":"Feedback","number":"4","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>lm2596sx-adj</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LM2596SX-ADJ symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -250 1500 500' style='width:100%;height:100%'><rect x='-500.0' y='-200.0' width='1000.0' height='400.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='VIN'><line class='pinvis' x1='-700.0' y1='-100.0' x2='-500.0' y2='-100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-100.0' x2='-500.0' y2='-100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-55.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-100.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VIN</text><g class='pingroup' data-num='2' data-name='Output'><line class='pinvis' x1='-700.0' y1='-0.0' x2='-500.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-0.0' x2='-500.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='45.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='0.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>Output</text><g class='pingroup' data-num='3' data-name='GND'><line class='pinvis' x1='-700.0' y1='100.0' x2='-500.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='100.0' x2='-500.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='145.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='-470.0' y='100.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>GND</text><g class='pingroup' data-num='5' data-name='ON/OFF'><line class='pinvis' x1='700.0' y1='-0.0' x2='500.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-0.0' x2='500.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-45.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>5</text><text x='470.0' y='0.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>ON/OFF</text><g class='pingroup' data-num='4' data-name='Feedback'><line class='pinvis' x1='700.0' y1='100.0' x2='500.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='100.0' x2='500.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='55.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='470.0' y='100.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>Feedback</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/LM2596SX-ADJ", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"Output","number":"2","type":""},{"desc":"","name":"GND","number":"3","type":""},{"desc":"","name":"ON/OFF","number":"5","type":""},{"desc":"","name":"Feedback","number":"4","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>lm2596sx-adj</title>\ No newline at end of file