main
Ray
lm2596me-3-3: laser-etched CAD + chip hero (factory 2.0.0 backfill)
85c431a
LM2596ME-3.3
HGSEMI · DC-DC Converters · ESOP-8
LM2596ME-3.3 from HGSEMI, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated DC input supply, 4.5V to 40V (60V on HV variants). A low-ESR bulk capacitor (e.g. 470uF/35V) should be placed close to this pin and GND to suppress input ripple and switching noise. |
| 2 | OUTPUT | output | Emitter of the internal power switch, the switching node that drives the external inductor and catch (Schottky) diode of the buck converter. Delivers up to 3A of load current. |
| 3 | GND | power_in | Circuit ground return. Layout must place this pin's ground path directly to the catch-diode ground return to avoid switching-current noise; on the ESOP-8 package the exposed pad is also GND and provides the primary thermal path. |
| 4 | FEEDBACK | input | Voltage-feedback sense input. On this 3.3V fixed-output variant it connects directly to the output rail; the internal 1.23V reference plus internal divider set VOUT to 3.3V (spec 3.168V-3.432V). |
| 5 | ON/OFF | input | TTL-compatible enable input with hysteresis (VIH |
| 6 | NC | unconnected | No internal connection. Leave floating or tie to a copper pour for mechanical anchoring; not used electrically. |
| 7 | NC | unconnected | No internal connection. Leave floating or tie to a copper pour for mechanical anchoring; not used electrically. |
| 8 | NC | unconnected | No internal connection. Leave floating or tie to a copper pour for mechanical anchoring; not used electrically. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | ESOP-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LM2596ME-3.3/TRLM2596ME-5.0/TRLM2596ME-12/TRLM2596ME-15/TRLM2596M-3.3/TRLM2596M-5.0/TRLM2596M-12/TRLM2596M-15/TRLM2596DQ4-3.3/TRLM2596DQ4-5.0/TRLM2596DQ4-12/TRLM2596DQ4-15/TRLM2596T-3.3LM2596HVT-3.3LM2596S-3.3/TRLM2596S-5.0/TRLM2596S-12/TRLM2596S-15/TRLM2596HVS-3.3/TRLM2596HVS-5.0/TRLM2596HVS-12/TRLM2596HVS-15/TRLM2596TB-3.3LM2596HVTB-3.3LM2596MD5T-3.3/TRLM2596MD5T-5.0/TRLM2596MD5T-12/TRLM2596MD5T-15/TRLM2596MDT-3.3/TRLM2596MDT-5.0/TRLM2596MDT-12/TRLM2596MDT-15/TR
Related parts (NOT interchangeable)
The extractor listed these alongside LM2596ME-3.3, but they are different parts with different electrical characteristics. Do not order them as substitutes.
LM2596ME-ADJ/TRLM2596M-ADJ/TRLM2596DQ4-ADJ/TRLM2596T-ADJLM2596T-5.0LM2596T-12LM2596T-15LM2596HVT-ADJLM2596HVT-5.0LM2596HVT-12LM2596HVT-15LM2596S-ADJ/TRLM2596HVS-ADJ/TRLM2596TB-ADJLM2596TB-5.0LM2596TB-12LM2596TB-15LM2596HVTB-ADJLM2596HVTB-5.0LM2596HVTB-12LM2596HVTB-15LM2596MD5T-ADJ/TRLM2596MDT-ADJ/TR
CAD (KiCad official)
- Symbol:
LM2596ME-3.3 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm2596me-3-3-etched.step/lm2596me-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2596me-3-3.step/lm2596me-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (17 pp, sha256
986b3081cc1a4676, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2596ME-3.3
**HGSEMI** · DC-DC Converters · ESOP-8
LM2596ME-3.3 from HGSEMI, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated DC input supply, 4.5V to 40V (60V on HV variants). A low-ESR bulk capacitor (e.g. 470uF/35V) should be placed close to this pin and GND to suppress input ripple and switching noise. |
| 2 | OUTPUT | output | Emitter of the internal power switch, the switching node that drives the external inductor and catch (Schottky) diode of the buck converter. Delivers up to 3A of load current. |
| 3 | GND | power_in | Circuit ground return. Layout must place this pin's ground path directly to the catch-diode ground return to avoid switching-current noise; on the ESOP-8 package the exposed pad is also GND and provides the primary thermal path. |
| 4 | FEEDBACK | input | Voltage-feedback sense input. On this 3.3V fixed-output variant it connects directly to the output rail; the internal 1.23V reference plus internal divider set VOUT to 3.3V (spec 3.168V-3.432V). |
| 5 | ON/OFF | input | TTL-compatible enable input with hysteresis (VIH~1.4V, VIL~0.8V). Ground or leave floating (internal pull-down) to enable the regulator; drive high (up to VIN) to shut the chip down (standby current ~80uA). |
| 6 | NC | unconnected | No internal connection. Leave floating or tie to a copper pour for mechanical anchoring; not used electrically. |
| 7 | NC | unconnected | No internal connection. Leave floating or tie to a copper pour for mechanical anchoring; not used electrically. |
| 8 | NC | unconnected | No internal connection. Leave floating or tie to a copper pour for mechanical anchoring; not used electrically. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | ESOP-8 |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LM2596ME-3.3/TR`
- `LM2596ME-5.0/TR`
- `LM2596ME-12/TR`
- `LM2596ME-15/TR`
- `LM2596M-3.3/TR`
- `LM2596M-5.0/TR`
- `LM2596M-12/TR`
- `LM2596M-15/TR`
- `LM2596DQ4-3.3/TR`
- `LM2596DQ4-5.0/TR`
- `LM2596DQ4-12/TR`
- `LM2596DQ4-15/TR`
- `LM2596T-3.3`
- `LM2596HVT-3.3`
- `LM2596S-3.3/TR`
- `LM2596S-5.0/TR`
- `LM2596S-12/TR`
- `LM2596S-15/TR`
- `LM2596HVS-3.3/TR`
- `LM2596HVS-5.0/TR`
- `LM2596HVS-12/TR`
- `LM2596HVS-15/TR`
- `LM2596TB-3.3`
- `LM2596HVTB-3.3`
- `LM2596MD5T-3.3/TR`
- `LM2596MD5T-5.0/TR`
- `LM2596MD5T-12/TR`
- `LM2596MD5T-15/TR`
- `LM2596MDT-3.3/TR`
- `LM2596MDT-5.0/TR`
- `LM2596MDT-12/TR`
- `LM2596MDT-15/TR`
## Related parts (NOT interchangeable)
The extractor listed these alongside LM2596ME-3.3, but they are **different parts** with different electrical characteristics. Do not order them as substitutes.
- `LM2596ME-ADJ/TR`
- `LM2596M-ADJ/TR`
- `LM2596DQ4-ADJ/TR`
- `LM2596T-ADJ`
- `LM2596T-5.0`
- `LM2596T-12`
- `LM2596T-15`
- `LM2596HVT-ADJ`
- `LM2596HVT-5.0`
- `LM2596HVT-12`
- `LM2596HVT-15`
- `LM2596S-ADJ/TR`
- `LM2596HVS-ADJ/TR`
- `LM2596TB-ADJ`
- `LM2596TB-5.0`
- `LM2596TB-12`
- `LM2596TB-15`
- `LM2596HVTB-ADJ`
- `LM2596HVTB-5.0`
- `LM2596HVTB-12`
- `LM2596HVTB-15`
- `LM2596MD5T-ADJ/TR`
- `LM2596MDT-ADJ/TR`
## CAD (KiCad official)
- Symbol: `LM2596ME-3.3`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `lm2596me-3-3-etched.step` / `lm2596me-3-3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2596me-3-3.step` / `lm2596me-3-3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/lm2596me-3-3-datasheet.pdf) (17 pp, sha256 `986b3081cc1a4676`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2596me-3-3-datasheet.pdf)