main
Ray
lm2596mdt-12: laser-etched CAD + chip hero (factory 2.0.0 backfill)
05ecbb0
LM2596MDT-12
HGSEMI · DC-DC Converters · TO-252-4
LM2596MDT-12 from HGSEMI, in a TO-252-4. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated DC power supply input. Operating range 4.5 V to 40 V (LM2596) or 4.5 V to 60 V (LM2596HV). Bypass to GND with a large-value input capacitor placed close to the pin to suppress supply noise and provide the switching current pulses. |
| 2 | OUTPUT | output | Switching node - internal power transistor emitter/drain. Connects to the external step-down inductor and the cathode of the catch (Schottky) diode. Saturation voltage typically 1.3 V (max 1.5 V) at ILOAD = 3 A. Absolute-max voltage range -0.3 V to VIN. |
| 3 | GND | power_in | Device ground return and heat-sinking tab reference. Must be routed on the output-side ground path (returning through the catch diode) rather than the switching-current side to keep the analog reference quiet from switching-current transients. |
| 4 | FEEDBACK | input | Voltage feedback sense input. For the fixed 12 V version this pin is tied directly to the regulated output - the internal divider sets the 12 V regulation (11.52 V / 12 V / 12.48 V min/typ/max). Internal reference threshold is 1.23 V. Absolute-max voltage range -0.3 V to VIN. |
| 5 | ON_OFF | input | Active-low enable / shutdown control input with hysteresis. Pull LOW (< 0.8 V) or leave floating to enable the regulator; drive HIGH (> 1.4 V) to shut the part down. Leakage 5 uA typ (max 30 uA) at 2.5 V (OFF); 0.2 uA typ (max 10 uA) at 0.5 V (ON). Absolute-max voltage range -0.3 V to VIN. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TO-252-4 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
LM2596MDT-12/TRLM2596MDT-12LM2596MDT-3.3/TRLM2596MDT-12LM2596MDT-5.0/TRLM2596MDT-12LM2596MDT-15/TRLM2596MDT-12LM2596MDT-ADJ/TRLM2596MDT-12LM2596MD5T-12/TRLM2596MDT-12LM2596MD5T-3.3/TRLM2596MDT-12LM2596MD5T-5.0/TRLM2596MDT-12LM2596MD5T-15/TRLM2596MDT-12LM2596MD5T-ADJ/TRLM2596MDT-12LM2596S-12/TRLM2596MDT-12LM2596S-3.3/TRLM2596MDT-12LM2596S-5.0/TRLM2596MDT-12LM2596S-15/TRLM2596MDT-12LM2596S-ADJ/TRLM2596MDT-12LM2596HVS-12/TRLM2596MDT-12LM2596HVS-3.3/TRLM2596MDT-12LM2596HVS-5.0/TRLM2596MDT-12LM2596HVS-15/TRLM2596MDT-12LM2596HVS-ADJ/TRLM2596MDT-12LM2596T-12LM2596MDT-12LM2596T-3.3LM2596MDT-12LM2596T-5.0LM2596MDT-12LM2596T-15LM2596MDT-12LM2596T-ADJLM2596MDT-12LM2596HVT-12LM2596MDT-12LM2596HVT-3.3LM2596MDT-12LM2596HVT-5.0LM2596MDT-12LM2596HVT-15LM2596MDT-12LM2596HVT-ADJLM2596MDT-12LM2596TB-12LM2596MDT-12LM2596TB-3.3LM2596MDT-12LM2596TB-5.0LM2596MDT-12LM2596TB-15LM2596MDT-12LM2596TB-ADJLM2596MDT-12LM2596HVTB-12LM2596MDT-12LM2596HVTB-3.3LM2596MDT-12LM2596HVTB-5.0LM2596MDT-12LM2596HVTB-15LM2596MDT-12LM2596HVTB-ADJLM2596MDT-12LM2596M-12/TRLM2596MDT-12LM2596M-3.3/TRLM2596MDT-12LM2596M-5.0/TRLM2596MDT-12LM2596M-15/TRLM2596MDT-12LM2596M-ADJ/TRLM2596MDT-12LM2596ME-12/TRLM2596MDT-12LM2596ME-3.3/TRLM2596MDT-12LM2596ME-5.0/TRLM2596MDT-12LM2596ME-15/TRLM2596MDT-12LM2596ME-ADJ/TRLM2596MDT-12LM2596DQ4-12/TRLM2596MDT-12LM2596DQ4-3.3/TRLM2596MDT-12LM2596DQ4-5.0/TRLM2596MDT-12LM2596DQ4-15/TRLM2596MDT-12LM2596DQ4-ADJ/TR
CAD (KiCad official)
- Symbol:
LM2596MDT-12 - Footprint:
Package_TO_SOT_SMD:TO-252-4 - 3D model: TO-252-4 (KiCad packages3D, STEP)
- 3D model files:
lm2596mdt-12-etched.step/lm2596mdt-12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2596mdt-12.step/lm2596mdt-12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (None pp, sha256
986b3081cc1a4676, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2596MDT-12
**HGSEMI** · DC-DC Converters · TO-252-4
LM2596MDT-12 from HGSEMI, in a TO-252-4. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated DC power supply input. Operating range 4.5 V to 40 V (LM2596) or 4.5 V to 60 V (LM2596HV). Bypass to GND with a large-value input capacitor placed close to the pin to suppress supply noise and provide the switching current pulses. |
| 2 | OUTPUT | output | Switching node - internal power transistor emitter/drain. Connects to the external step-down inductor and the cathode of the catch (Schottky) diode. Saturation voltage typically 1.3 V (max 1.5 V) at ILOAD = 3 A. Absolute-max voltage range -0.3 V to VIN. |
| 3 | GND | power_in | Device ground return and heat-sinking tab reference. Must be routed on the output-side ground path (returning through the catch diode) rather than the switching-current side to keep the analog reference quiet from switching-current transients. |
| 4 | FEEDBACK | input | Voltage feedback sense input. For the fixed 12 V version this pin is tied directly to the regulated output - the internal divider sets the 12 V regulation (11.52 V / 12 V / 12.48 V min/typ/max). Internal reference threshold is 1.23 V. Absolute-max voltage range -0.3 V to VIN. |
| 5 | ON_OFF | input | Active-low enable / shutdown control input with hysteresis. Pull LOW (< 0.8 V) or leave floating to enable the regulator; drive HIGH (> 1.4 V) to shut the part down. Leakage 5 uA typ (max 30 uA) at 2.5 V (OFF); 0.2 uA typ (max 10 uA) at 0.5 V (ON). Absolute-max voltage range -0.3 V to VIN. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TO-252-4 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
- `LM2596MDT-12/TR`
- `LM2596MDT-12LM2596MDT-3.3/TR`
- `LM2596MDT-12LM2596MDT-5.0/TR`
- `LM2596MDT-12LM2596MDT-15/TR`
- `LM2596MDT-12LM2596MDT-ADJ/TR`
- `LM2596MDT-12LM2596MD5T-12/TR`
- `LM2596MDT-12LM2596MD5T-3.3/TR`
- `LM2596MDT-12LM2596MD5T-5.0/TR`
- `LM2596MDT-12LM2596MD5T-15/TR`
- `LM2596MDT-12LM2596MD5T-ADJ/TR`
- `LM2596MDT-12LM2596S-12/TR`
- `LM2596MDT-12LM2596S-3.3/TR`
- `LM2596MDT-12LM2596S-5.0/TR`
- `LM2596MDT-12LM2596S-15/TR`
- `LM2596MDT-12LM2596S-ADJ/TR`
- `LM2596MDT-12LM2596HVS-12/TR`
- `LM2596MDT-12LM2596HVS-3.3/TR`
- `LM2596MDT-12LM2596HVS-5.0/TR`
- `LM2596MDT-12LM2596HVS-15/TR`
- `LM2596MDT-12LM2596HVS-ADJ/TR`
- `LM2596MDT-12LM2596T-12`
- `LM2596MDT-12LM2596T-3.3`
- `LM2596MDT-12LM2596T-5.0`
- `LM2596MDT-12LM2596T-15`
- `LM2596MDT-12LM2596T-ADJ`
- `LM2596MDT-12LM2596HVT-12`
- `LM2596MDT-12LM2596HVT-3.3`
- `LM2596MDT-12LM2596HVT-5.0`
- `LM2596MDT-12LM2596HVT-15`
- `LM2596MDT-12LM2596HVT-ADJ`
- `LM2596MDT-12LM2596TB-12`
- `LM2596MDT-12LM2596TB-3.3`
- `LM2596MDT-12LM2596TB-5.0`
- `LM2596MDT-12LM2596TB-15`
- `LM2596MDT-12LM2596TB-ADJ`
- `LM2596MDT-12LM2596HVTB-12`
- `LM2596MDT-12LM2596HVTB-3.3`
- `LM2596MDT-12LM2596HVTB-5.0`
- `LM2596MDT-12LM2596HVTB-15`
- `LM2596MDT-12LM2596HVTB-ADJ`
- `LM2596MDT-12LM2596M-12/TR`
- `LM2596MDT-12LM2596M-3.3/TR`
- `LM2596MDT-12LM2596M-5.0/TR`
- `LM2596MDT-12LM2596M-15/TR`
- `LM2596MDT-12LM2596M-ADJ/TR`
- `LM2596MDT-12LM2596ME-12/TR`
- `LM2596MDT-12LM2596ME-3.3/TR`
- `LM2596MDT-12LM2596ME-5.0/TR`
- `LM2596MDT-12LM2596ME-15/TR`
- `LM2596MDT-12LM2596ME-ADJ/TR`
- `LM2596MDT-12LM2596DQ4-12/TR`
- `LM2596MDT-12LM2596DQ4-3.3/TR`
- `LM2596MDT-12LM2596DQ4-5.0/TR`
- `LM2596MDT-12LM2596DQ4-15/TR`
- `LM2596MDT-12LM2596DQ4-ADJ/TR`
## CAD (KiCad official)
- Symbol: `LM2596MDT-12`
- Footprint: `Package_TO_SOT_SMD:TO-252-4`
- 3D model: TO-252-4 (KiCad packages3D, STEP)
- 3D model files: `lm2596mdt-12-etched.step` / `lm2596mdt-12-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2596mdt-12.step` / `lm2596mdt-12.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/lm2596mdt-12-datasheet.pdf) (None pp, sha256 `986b3081cc1a4676`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2596mdt-12-datasheet.pdf)