component
LM2596HVS-12RG
Public Made by Adomby adom
HANSCHIP semiconductor DC-DC Converters, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LM2596HVS-12RG
HANSCHIP semiconductor · DC-DC Converters · TO-263-5
LM2596HVS-12RG from HANSCHIP semiconductor, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input pin requiring a DC supply of 4.5V to 40V (57V for HV types), with a large capacitor between the supply pin and ground to suppress supply noise. |
| 2 | OUTPUT | power_out | Power switch output pin that acts as the switching node supplying the output load. |
| 3 | GND | power_in | Ground pin that should be routed on the layout along the output ground path away from the Schottky diode to limit switching-current spike noise. |
| 4 | FEEDBACK | input | Voltage feedback pin that monitors the output through a resistor divider network, with a feedback threshold voltage of 1.23V. |
| 5 | ON_OFF | input | Enable pin where a high level (switch-pin threshold 1.4V for OFF) turns the chip off and a low level (0.8V for ON) turns it on; it defaults to low when floating. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (LM2596HV-12) | VOUT | 11.52 | 12 | 12.48 | V | VIN=15V |
4 |
| Input voltage LM2596HV | VIN | 4.5 | 57 | V | 5 | ||
| Standby current | ISTBY | 80 | 200 | uA | VON_OFF=5V | 5 | |
| Quiescent operating current | IQ | 2 | 10 | mA | VON_OFF=0V, VFB=VIN | 5 | |
| Operating frequency | FOSC | 127 | 150 | 173 | kHz | 5 | |
| Current limit | IL | 3.6 | 4.8 | 6.9 | A | VFB=0 | 5 |
| ON_OFF pin threshold high (control OFF) | VON_OFF | 1.4 | V | High level (control OFF) | 5 | ||
| ON_OFF pin threshold low (control ON) | VON_OFF | 0.8 | V | Low level (control ON) | 5 | ||
| ON_OFF pin input current high | IH | 5 | 30 | uA | VON_OFF=2.5V(OFF) | 5 | |
| ON_OFF pin input current low | IL | 0.2 | 10 | uA | VON_OFF=0.5V(ON) | 5 | |
| Saturation voltage | VCE | 1.3 | 1.5 | V | VFB=0V LOUT=3A | 5 | |
| Maximum duty cycle | DMAX | 100 | % | CFB=0V | 5 | ||
| Thermal resistance junction to ambient (no heatsink) | RJA | 50 | ℃/W | TO220, TO263 packages, no heatsink | 5 | ||
| Feedback threshold voltage | VFB | 1.23 | V | 6 | |||
| Input supply voltage absolute maximum (LM2596HV) | VIN | 57 | V | 3 | |||
| Feedback pin voltage | VFB | -0.3 | V | Upper limit is VIN | 3 | ||
| ON_OFF pin voltage | VON_OFF | -0.3 | V | Upper limit is VIN | 3 | ||
| Power output pin voltage | VOUT | -0.3 | V | Upper limit is VIN | 3 | ||
| Operating junction temperature (absolute maximum) | TJ | -40 | 125 | ℃ | 3 | ||
| Storage temperature | TSTG | -65 | 150 | ℃ | 3 | ||
| Lead soldering temperature | TLEAD | 245 | ℃ | Wire soldering, 10 s | 3 | ||
| ESD human body model | ESD | 2000 | V | Human body model | 3 | ||
| Recommended input voltage (LM2596HV) | VIN | 5 | 57 | V | 3 | ||
| Recommended operating junction temperature | TJ | -40 | 125 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
LM2596HVS-12RG - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2596hvs-12rg-etched.step/lm2596hvs-12rg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2596hvs-12rg.step/lm2596hvs-12rg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (14 pp, sha256
1d030bc28ae7c67a, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2596HVS-12RG
**HANSCHIP semiconductor** · DC-DC Converters · TO-263-5
LM2596HVS-12RG from HANSCHIP semiconductor, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input pin requiring a DC supply of 4.5V to 40V (57V for HV types), with a large capacitor between the supply pin and ground to suppress supply noise. |
| 2 | OUTPUT | power_out | Power switch output pin that acts as the switching node supplying the output load. |
| 3 | GND | power_in | Ground pin that should be routed on the layout along the output ground path away from the Schottky diode to limit switching-current spike noise. |
| 4 | FEEDBACK | input | Voltage feedback pin that monitors the output through a resistor divider network, with a feedback threshold voltage of 1.23V. |
| 5 | ON_OFF | input | Enable pin where a high level (switch-pin threshold 1.4V for OFF) turns the chip off and a low level (0.8V for ON) turns it on; it defaults to low when floating. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (LM2596HV-12) | VOUT | 11.52 | 12 | 12.48 | V | VIN=15V~57V ILOAD=0.2A~3A | 4 |
| Input voltage LM2596HV | VIN | 4.5 | | 57 | V | | 5 |
| Standby current | ISTBY | 80 | | 200 | uA | VON_OFF=5V | 5 |
| Quiescent operating current | IQ | 2 | | 10 | mA | VON_OFF=0V, VFB=VIN | 5 |
| Operating frequency | FOSC | 127 | 150 | 173 | kHz | | 5 |
| Current limit | IL | 3.6 | 4.8 | 6.9 | A | VFB=0 | 5 |
| ON_OFF pin threshold high (control OFF) | VON_OFF | 1.4 | | | V | High level (control OFF) | 5 |
| ON_OFF pin threshold low (control ON) | VON_OFF | | | 0.8 | V | Low level (control ON) | 5 |
| ON_OFF pin input current high | IH | 5 | | 30 | uA | VON_OFF=2.5V(OFF) | 5 |
| ON_OFF pin input current low | IL | 0.2 | | 10 | uA | VON_OFF=0.5V(ON) | 5 |
| Saturation voltage | VCE | 1.3 | | 1.5 | V | VFB=0V LOUT=3A | 5 |
| Maximum duty cycle | DMAX | | | 100 | % | CFB=0V | 5 |
| Thermal resistance junction to ambient (no heatsink) | RJA | | 50 | | ℃/W | TO220, TO263 packages, no heatsink | 5 |
| Feedback threshold voltage | VFB | | 1.23 | | V | | 6 |
| Input supply voltage absolute maximum (LM2596HV) | VIN | | | 57 | V | | 3 |
| Feedback pin voltage | VFB | -0.3 | | | V | Upper limit is VIN | 3 |
| ON_OFF pin voltage | VON_OFF | -0.3 | | | V | Upper limit is VIN | 3 |
| Power output pin voltage | VOUT | -0.3 | | | V | Upper limit is VIN | 3 |
| Operating junction temperature (absolute maximum) | TJ | -40 | | 125 | ℃ | | 3 |
| Storage temperature | TSTG | -65 | | 150 | ℃ | | 3 |
| Lead soldering temperature | TLEAD | | | 245 | ℃ | Wire soldering, 10 s | 3 |
| ESD human body model | ESD | | | 2000 | V | Human body model | 3 |
| Recommended input voltage (LM2596HV) | VIN | 5 | | 57 | V | | 3 |
| Recommended operating junction temperature | TJ | -40 | | 125 | ℃ | | 3 |
## CAD (KiCad official)
- Symbol: `LM2596HVS-12RG`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files: `lm2596hvs-12rg-etched.step` / `lm2596hvs-12rg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2596hvs-12rg.step` / `lm2596hvs-12rg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HANSCHIP semiconductor datasheet](docs/lm2596hvs-12rg-datasheet.pdf) (14 pp, sha256 `1d030bc28ae7c67a`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2596hvs-12rg-datasheet.pdf)