component
LM2596HVGR-ADJ
Public Made by Adomby adom
HTC Korea TAEJIN Tech DC-DC Converters, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LM2596HVGR-ADJ
HTC Korea TAEJIN Tech · DC-DC Converters · TO-263-5
LM2596HVGR-ADJ from HTC Korea TAEJIN Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; the operating supply range is 4.5 V to 60 V, and the absolute maximum supply voltage is 63 V. |
| 2 | VOUT | power_out | Regulated switching output to the inductor and output capacitor; the output voltage to GND must not go below -1 V and the guaranteed load current is 3.0 A. |
| 3 | GND | power_in | Ground reference pin; the datasheet recommends single-point grounding or a ground plane for best results. |
| 4 | FB/ADJ | input | Output voltage feedback or adjust input, with a nominal 1.23 V feedback voltage on the adjustable version and an absolute maximum range of -0.3 V to 25 V (or VIN). |
| 5 | ON/OFF | input | Shutdown control input with a 0.6 V to 2.0 V threshold (1.3 V typical) and an absolute maximum range of -0.3 V to 60 V (or VIN). |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTC Korea TAEJIN Tech |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 1.193 | 1.23 | 1.273 | V | 8V ≤ VIN ≤ 60V, 0.2A ≤ ILOAD ≤ 3A | 4 |
| Feedback Voltage (full temperature range) | VFB | 1.18 | 1.285 | V | 8V ≤ VIN ≤ 60V, 0.2A ≤ ILOAD ≤ 3A; boldface row, full TJ -40 to +125°C | 4 | |
| Current Limit | CL | 4.1 | 5.3 | 6.7 | A | Peak current. No outside circuit. VFB=0V (Note 4, 8) | 5 |
| Current Limit (full temperature range) | CL | 3.8 | 7 | A | Peak current. No outside circuit. VFB=0V (Note 4, 8); boldface row, full TJ -40 to +125°C | 5 | |
| Saturation Voltage | VSAT | 1.35 | 1.5 | V | IOUT=3A. No outside circuit. VFB=0V (Note 4) | 5 | |
| Saturation Voltage (full temperature range) | VSAT | 1.7 | V | IOUT=3A. No outside circuit. VFB=0V (Note 4); boldface row, full TJ -40 to +125°C | 5 | ||
| Quiescent Current | IQ | 5 | 8 | mA | VFB=12V force driver off (Note 6) | 4 | |
| Shutdown Supply Current | ISTB | 30 | 220 | uA | VON/OFF=5V, VIN=60V | 4 | |
| Shutdown Supply Current (full temperature range) | ISTB | 280 | uA | VON/OFF=5V, VIN=60V; boldface row, full TJ -40 to +125°C | 4 | ||
| Oscillator Frequency | FOSC | 133 | 150 | 168 | KHz | Note 8 | 4 |
| Oscillator Frequency (full temperature range) | FOSC | 120 | 180 | KHz | Note 8; boldface row, full TJ -40 to +125°C | 4 | |
| Max. duty Cycle | DC(MAX.) | 100 | % | VFB=0V force driver on (Note 5) | 4 | ||
| Min. duty Cycle | DC(MIN.) | 0 | % | VFB=12V force driver off | 4 | ||
| Output Leakage Current | IL | -300 | -50 | uA | VOUT=0V. No outside circuit. VFB=12V (Note 6, 7) | 5 | |
| Output Leakage Current | IL1 | -30 | -3 | mA | VOUT=-1V. No outside circuit. VFB=12V (Note 6, 7) | 5 | |
| ON/OFF Input Threshold | VTH | 0.6 | 1.3 | 2 | V | 5 | |
| ON/OFF Input Current (high) | IH | -5 | -0.1 | 5 | uA | VON/OFF=2.5V | 5 |
| ON/OFF Input Current (low) | IL | -1 | -0.01 | 1 | uA | VON/OFF=0.5V | 5 |
| Supply Voltage | VIN | 63 | V | 1 | |||
| ON/OFF Pin Input Voltage | VON/OFF | -0.3 | 60 | V | Maximum printed as 60 (or VIN) | 1 | |
| FB pin voltage | VFB | -0.3 | 25 | V | Maximum printed as 25 (or VIN) | 1 | |
| Output voltage to GND | VOUT | -1 | V | 1 | |||
| Storage Temperature Range | TSTG | -65 | 150 | ℃ | 1 | ||
| Maximum Junction Temperature Range | TJ,MAX | 150 | ℃ | 1 | |||
| Supply Voltage | VIN | 4.5 | 60 | V | 2 | ||
| Load Current | ILOAD | 3 | A | 2 | |||
| Temperature Range | TJ | -40 | 125 | 2 |
CAD (KiCad official)
- Symbol:
LM2596HVGR-ADJ - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2596hvgr-adj-etched.step/lm2596hvgr-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2596hvgr-adj.step/lm2596hvgr-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTC Korea TAEJIN Tech datasheet (9 pp, sha256
2421803b73c06900, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2596HVGR-ADJ
**HTC Korea TAEJIN Tech** · DC-DC Converters · TO-263-5
LM2596HVGR-ADJ from HTC Korea TAEJIN Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; the operating supply range is 4.5 V to 60 V, and the absolute maximum supply voltage is 63 V. |
| 2 | VOUT | power_out | Regulated switching output to the inductor and output capacitor; the output voltage to GND must not go below -1 V and the guaranteed load current is 3.0 A. |
| 3 | GND | power_in | Ground reference pin; the datasheet recommends single-point grounding or a ground plane for best results. |
| 4 | FB/ADJ | input | Output voltage feedback or adjust input, with a nominal 1.23 V feedback voltage on the adjustable version and an absolute maximum range of -0.3 V to 25 V (or VIN). |
| 5 | ON/OFF | input | Shutdown control input with a 0.6 V to 2.0 V threshold (1.3 V typical) and an absolute maximum range of -0.3 V to 60 V (or VIN). |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTC Korea TAEJIN Tech |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 1.193 | 1.23 | 1.273 | V | 8V ≤ VIN ≤ 60V, 0.2A ≤ ILOAD ≤ 3A | 4 |
| Feedback Voltage (full temperature range) | VFB | 1.18 | | 1.285 | V | 8V ≤ VIN ≤ 60V, 0.2A ≤ ILOAD ≤ 3A; boldface row, full TJ -40 to +125°C | 4 |
| Current Limit | CL | 4.1 | 5.3 | 6.7 | A | Peak current. No outside circuit. VFB=0V (Note 4, 8) | 5 |
| Current Limit (full temperature range) | CL | 3.8 | | 7 | A | Peak current. No outside circuit. VFB=0V (Note 4, 8); boldface row, full TJ -40 to +125°C | 5 |
| Saturation Voltage | VSAT | | 1.35 | 1.5 | V | IOUT=3A. No outside circuit. VFB=0V (Note 4) | 5 |
| Saturation Voltage (full temperature range) | VSAT | | | 1.7 | V | IOUT=3A. No outside circuit. VFB=0V (Note 4); boldface row, full TJ -40 to +125°C | 5 |
| Quiescent Current | IQ | | 5 | 8 | mA | VFB=12V force driver off (Note 6) | 4 |
| Shutdown Supply Current | ISTB | | 30 | 220 | uA | VON/OFF=5V, VIN=60V | 4 |
| Shutdown Supply Current (full temperature range) | ISTB | | | 280 | uA | VON/OFF=5V, VIN=60V; boldface row, full TJ -40 to +125°C | 4 |
| Oscillator Frequency | FOSC | 133 | 150 | 168 | KHz | Note 8 | 4 |
| Oscillator Frequency (full temperature range) | FOSC | 120 | | 180 | KHz | Note 8; boldface row, full TJ -40 to +125°C | 4 |
| Max. duty Cycle | DC(MAX.) | | | 100 | % | VFB=0V force driver on (Note 5) | 4 |
| Min. duty Cycle | DC(MIN.) | 0 | | | % | VFB=12V force driver off | 4 |
| Output Leakage Current | IL | -300 | | -50 | uA | VOUT=0V. No outside circuit. VFB=12V (Note 6, 7) | 5 |
| Output Leakage Current | IL1 | -30 | | -3 | mA | VOUT=-1V. No outside circuit. VFB=12V (Note 6, 7) | 5 |
| ON/OFF Input Threshold | VTH | 0.6 | 1.3 | 2 | V | | 5 |
| ON/OFF Input Current (high) | IH | -5 | -0.1 | 5 | uA | VON/OFF=2.5V | 5 |
| ON/OFF Input Current (low) | IL | -1 | -0.01 | 1 | uA | VON/OFF=0.5V | 5 |
| Supply Voltage | VIN | | | 63 | V | | 1 |
| ON/OFF Pin Input Voltage | VON/OFF | -0.3 | | 60 | V | Maximum printed as 60 (or VIN) | 1 |
| FB pin voltage | VFB | -0.3 | | 25 | V | Maximum printed as 25 (or VIN) | 1 |
| Output voltage to GND | VOUT | -1 | | | V | | 1 |
| Storage Temperature Range | TSTG | -65 | | 150 | ℃ | | 1 |
| Maximum Junction Temperature Range | TJ,MAX | | | 150 | ℃ | | 1 |
| Supply Voltage | VIN | 4.5 | | 60 | V | | 2 |
| Load Current | ILOAD | | | 3 | A | | 2 |
| Temperature Range | TJ | -40 | | 125 | | | 2 |
## CAD (KiCad official)
- Symbol: `LM2596HVGR-ADJ`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files: `lm2596hvgr-adj-etched.step` / `lm2596hvgr-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2596hvgr-adj.step` / `lm2596hvgr-adj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HTC Korea TAEJIN Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906014834380800) (9 pp, sha256 `2421803b73c06900`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2596hvgr-adj-datasheet.pdf)