component
LM2596HVGR-12
Public Made by Adomby adom
HTC Korea TAEJIN Tech DC-DC Converters, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2596HVGR-12
HTC Korea TAEJIN Tech · DC-DC Converters · TO-263-5
LM2596HVGR-12 from HTC Korea TAEJIN Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin, with an operating supply range of 4.5V to 60V and an absolute maximum supply voltage of 63V. |
| 2 | VOUT | power_out | Regulator output pin that delivers the switched and filtered output voltage to the load, rated for up to 3.0A load current. |
| 3 | GND | power_in | Ground pin; the datasheet recommends single-point grounding or a ground-plane construction for best results. |
| 4 | FB/ADJ | input | Output voltage feedback or adjust input, with a feedback voltage of 1.23V (typical) on the adjustable version and an absolute maximum of 25V (or VIN). |
| 5 | ON/OFF | input | External shutdown input with a typical threshold of 1.3V (limits 0.6V to 2.0V) and an absolute maximum of 60V (or VIN), where the device draws about 30µA standby current when shut down. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTC Korea TAEJIN Tech |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VIN | 63 | V | 1 | |||
| ON/OFF Pin Input Voltage | VON/OFF | -0.3 | 60 | V | max printed as '60 (or VIN)' | 1 | |
| FB pin voltage | VFB | -0.3 | 25 | V | max printed as '25 (or VIN)' | 1 | |
| Output voltage to GND | VOUT | -1 | V | 1 | |||
| Storage Temperature Range | TSTG | -65 | 150 | ℃ | 1 | ||
| Maximum Junction Temperature Range | TJ,MAX | 150 | ℃ | 1 | |||
| Supply Voltage | VIN | 4.5 | 60 | V | 2 | ||
| Load Current | ILOAD | 3 | A | 2 | |||
| Temperature Range | TJ | -40 | 125 | unit not printed in datasheet | 2 | ||
| Output Voltage (LM2596HV-12) | VO | 11.58 | 12 | 12.48 | V | 15V ≤ VIN ≤ 60V, 0.2A ≤ ILOAD ≤ 3A | 4 |
| Output Voltage (LM2596HV-12), temperature extremes (bold) | VO | 11.46 | 12.6 | V | 15V ≤ VIN ≤ 60V, 0.2A ≤ ILOAD ≤ 3A | 4 | |
| Quiescent Current | IQ | 5 | 8 | mA | VFB=12V force driver off (Note 6) | 4 | |
| Shutdown Supply Current | ISTB | 30 | 220 | uA | VON/OFF=5V, VIN=60V | 4 | |
| Shutdown Supply Current, temperature extremes (bold) | ISTB | 280 | uA | VON/OFF=5V, VIN=60V | 4 | ||
| Oscillator Frequency | FOSC | 133 | 150 | 168 | KHz | (Note 8) | 4 |
| Oscillator Frequency, temperature extremes (bold) | FOSC | 120 | 180 | KHz | (Note 8) | 4 | |
| Current Limit | CL | 4.1 | 5.3 | 6.7 | A | Peak Current. No outside circuit. VFB=0V (Note 4, 8) | 5 |
| Current Limit, temperature extremes (bold) | CL | 3.8 | 7 | A | Peak Current. No outside circuit. VFB=0V (Note 4, 8) | 5 | |
| Saturation Voltage | VSAT | 1.35 | 1.5 | V | IOUT=3A. No outside circuit. VFB=0V (Note 4) | 5 | |
| Saturation Voltage, temperature extremes (bold) | VSAT | 1.7 | V | IOUT=3A. No outside circuit. VFB=0V (Note 4) | 5 | ||
| Output Leakage Current | IL | -300 | -50 | uA | VOUT=0V. No outside circuit. VFB=12V (Note 6, 7) | 5 | |
| Output Leakage Current | IL1 | -30 | -3 | mA | VOUT=-1V. No outside circuit. VFB=12V (Note 6, 7) | 5 | |
| ON/OFF Input Threshold | VTH | 0.6 | 1.3 | 2 | V | 5 | |
| ON/OFF Input Current (high) | IH | -5 | -0.1 | 5 | uA | VON/OFF=2.5V | 5 |
| ON/OFF Input Current (low) | IL | -1 | -0.01 | 1 | uA | VON/OFF=0.5V | 5 |
CAD (KiCad official)
- Symbol:
LM2596HVGR-12 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2596hvgr-12-etched.step/lm2596hvgr-12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2596hvgr-12.step/lm2596hvgr-12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTC Korea TAEJIN Tech datasheet (9 pp, sha256
379e0cca9b54cc37, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).