Generated by kicad-footprint-generator · KiCad file format 20260206
LM2596GR-5.0
HTC Korea TAEJIN Tech · DC-DC Converters · TO-263-5
LM2596GR-5.0 from HTC Korea TAEJIN Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input pin connected to the collector of the power transistor; keep the path from VIN to the high-frequency bypass capacitor CIN and GND as short as possible to minimize voltage transients. |
| 2 | OUTPUT | output | Emitter of the power transistor and switching node, connected to the inductor and the external diode cathode, with its PCB area kept to a minimum to limit coupling to sensitive circuitry. |
| 3 | GND | power_in | Ground pin, with the path to CIN kept as short as possible; the datasheet states pin 3 and the TAB are both ground and either may be used. |
| 4 | FEEDBACK | input | Feedback sense input that, for fixed-output versions such as the 5.0V part, must be connected directly to the output capacitor to set VOUT. |
| 5 | ON/OFF | input | Enable input for logic-level shutdown: applying a high level shuts the regulator off, a low level keeps it on, and the pin must not be left floating. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTC Korea TAEJIN Tech |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Supply Voltage | VIN | 45 | V | 2 | |||
| ON/OFF Pin Input Voltage | -0.3 | 25 | V | 2 | |||
| FB Pin Input Voltage | -0.3 | 25 | V | 2 | |||
| Output Voltage to Ground | -1 | V | 2 | ||||
| ESD Rating, HBM | 2 | kV | 2 | ||||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature | TSTG | -65 | 150 | °C | 2 | ||
| Supply Voltage | VIN | 40 | V | 2 | |||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 2 | ||
| Output Voltage (5.0V version) | VOUT | 4.9 | 5 | 5.1 | V | VIN = 12V, ILOAD = 0.5A | 7 |
| Output Voltage (5.0V version) | VOUT | 4.8 | 5 | 5.2 | V | 8.0V ≤ VIN ≤ 40V, 0.5A ≤ ILOAD ≤ 3.0A | 7 |
| Output Voltage (5.0V version, full operating temperature range) | VOUT | 4.75 | 5.25 | V | 7 | ||
| Oscillator Frequency | fO | 127 | 150 | 173 | kHz | 8 | |
| Saturation Voltage | VSAT | 1.26 | 1.4 | V | IOUT = 3.0A (Note 4,5) | 8 | |
| Current Limit | ICL | 3.4 | 4.5 | 6 | A | Peak Current (Note 4,5) | 8 |
| Output Leakage Current | IL | 25 | µA | Output = 0V | 8 | ||
| Output Leakage Current | IL | 1 | 10 | mA | Output = −1.0V (Note 7) | 8 | |
| Quiescent Current | IQ | 5 | 10 | mA | Note 6: FEEDBACK pin connected to +12V to force output transistor OFF | 8 | |
| Standby Quiescent Current | ISTBY | 100 | 200 | µA | ON/OFF pin = 5.0V (OFF) | 8 | |
| ON/OFF Pin Input Level (high) | VIH | 2 | 1.3 | V | VOUT = 0V | 8 | |
| ON/OFF Pin Input Level (low) | VIL | 1.3 | 0.6 | V | VOUT = Nominal Output Voltage | 8 | |
| ON/OFF Pin Input Current (high) | IIH | 5 | 15 | µA | ON/OFF Pin = 2.5V (OFF) | 8 | |
| ON/OFF Pin Input Current (low) | IIL | 5 | µA | ON/OFF Pin = 0.5V (ON) | 8 | ||
| Thermal Resistance, junction-to-ambient | θJA | 70 | °C/W | TO-263-5L | 2 | ||
| Thermal Resistance, junction-to-case | θJC | 5 | °C/W | TO-263-5L | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | Connect to GND. Attached to heatsink for thermal relief for TO220 package or put a copper plane connected to this pin as a | 4 |
CAD (KiCad official)
- Symbol:
LM2596GR-5.0 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2596gr-5-0-etched.step/lm2596gr-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2596gr-5-0.step/lm2596gr-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTC Korea TAEJIN Tech datasheet (16 pp, sha256
2d70ccce5f33a6f8, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).