component
LM2595SX-5.0
Public Made by Adomby adom
Texas Instruments DC-DC Converters, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM2595SX-5.0
Texas Instruments · DC-DC Converters · TO-263-5
LM2595SX-5.0 from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output | output | Internal switch output that produces voltage between (+VIN − VSAT) and approximately −0.5 V at approximately VOUT/VIN duty cycle; minimize PCB copper area connected to this pin to reduce coupling to sensitive circuitry. |
| 2 | +VIN | power_in | Positive input supply voltage (4.5 V to 40 V); requires low ESR bypass capacitor placed close to pin to minimize voltage transients and supply switching currents needed by the regulator. |
| 3 | Ground | power_in | Circuit ground reference. |
| 4 | Feedback | input | Feedback input that senses the regulated output voltage to complete the regulation feedback loop. |
| 5 | ON/OFF | input | Logic level shutdown control input; pull below 1.3 V to enable regulator (ON state), pull above 1.3 V (up to 25 V maximum) to disable regulator and reduce quiescent current to approximately 85 μA (standby); can be tied to ground or left open for normal continuous operation. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
LM2595SX-5.0 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2595sx-5-0-etched.step/lm2595sx-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2595sx-5-0.step/lm2595sx-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
da40d6af2ea0e5fc, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).