component
LM2595S-ADJRG
Public Made by Adomby adom
HANSCHIP semiconductor DC-DC Converters, TO-263-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2595S-ADJRG
HANSCHIP semiconductor · DC-DC Converters · TO-263-5L
LM2595S-ADJRG from HANSCHIP semiconductor, in a TO-263-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT | output | Power switch output pin, a switching node that supplies power to the output load; its voltage range is -0.3V to VIN. |
| 2 | VIN | power_in | Supply input pin requiring a 4.5V to 40V DC supply, with a large-value capacitor connected between VIN and GND to suppress supply noise. |
| 3 | GND | power_in | Ground pin, which in layout should be placed on the ground return path at the output point away from the Schottky diode to avoid switching current spike noise. |
| 4 | FEEDBACK | input | Voltage feedback pin that monitors the output voltage through an external resistor divider network, with a threshold voltage of 1.23V. |
| 5 | ON_OFF | input | Enable switch pin where a low level turns the chip on and a high level shuts it down, defaulting to low when floating. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | TO-263-5L |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output regulated voltage (ADJ) | VOUT | 1.193 | 1.23 | 1.267 | V | VIN=4.5V |
4 |
| Input operating voltage | VIN | 4.5 | 40 | V | 5 | ||
| Standby current | ISTBY | 80 | 200 | uA | VON_OFF=5V | 5 | |
| Quiescent operating current | IQ | 2 | 10 | mA | VON_OFF=0V, VFB=VIN | 5 | |
| Oscillator frequency | FOSC | 127 | 150 | 173 | kHz | 5 | |
| Current limit | IL | 3.6 | 4.8 | 6.9 | A | VFB=0 | 5 |
| ON/OFF pin threshold high (control off) | VON_OFF | 1.4 | V | 高 (control off) | 5 | ||
| ON/OFF pin threshold low (control on) | VON_OFF | 0.8 | V | 低 (control on) | 5 | ||
| ON/OFF pin leakage IH | IH | 5 | 15 | µA | VON_OFF=2.5V(ON) | 5 | |
| ON/OFF pin leakage IL | IL | 0.2 | 5 | µA | VON_OFF=2.5V(ON) | 5 | |
| Saturation voltage | VCE | 1.3 | 1.5 | V | VFB=0V, IOUT=3A | 5 | |
| Maximum duty cycle | DMAX | 100 | % | CFB=0V | 5 | ||
| Efficiency (ADJ) | η | 73 | % | VIN=12V, VOUT=3V, ILOAD=3A | 4 | ||
| Input supply voltage | VIN | 40 | V | 3 | |||
| Feedback pin voltage | VFB | -0.3 | V | -0.3 to VIN | 3 | ||
| ON/OFF pin voltage | VON_OFF | -0.3 | V | -0.3 to VIN | 3 | ||
| Output pin voltage | VOUT | -0.3 | V | -0.3 to VIN | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | ℃ | 3 | ||
| Storage temperature | TSTG | -65 | 150 | ℃ | 3 | ||
| Lead temperature | TLEAD | 245 | ℃ | 10S | 3 | ||
| ESD (human body model) | ESD | 2000 | V | 3 | |||
| Input voltage (recommended) | VIN | 5 | 40 | V | 3 | ||
| Operating junction temperature range (recommended) | TJ | -40 | 125 | ℃ | 3 | ||
| Thermal resistance junction to ambient | RJA | 50 | ℃/W | no heatsink, TO220/TO263 | 5 |
CAD (KiCad official)
- Symbol:
LM2595S-ADJRG - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5L (KiCad packages3D, STEP)
- 3D model files:
lm2595s-adjrg-etched.step/lm2595s-adjrg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2595s-adjrg.step/lm2595s-adjrg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (12 pp, sha256
a38c73808e083841, retrieved 2026-10-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).