component
LM2595S-5.0RG
Public Made by Adomby adom
HANSCHIP semiconductor DC-DC Converters, TO-263-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LM2595S-5.0RG
HANSCHIP semiconductor · DC-DC Converters · TO-263-5L
LM2595S-5.0RG from HANSCHIP semiconductor, in a TO-263-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT | output | Power switch output pin that forms the switching node and supplies the output load. |
| 2 | VIN | power_in | Supply input that requires a DC source of 4.5 V to 40 V, with a large-value capacitor placed between VIN and GND to filter supply noise. |
| 3 | GND | power_in | Ground pin that should be laid out so its return path avoids the Schottky diode output point, limiting switching-current spike noise. |
| 4 | FEEDBACK | input | Voltage feedback pin that senses the output through an external resistor divider and regulates to a 1.23 V threshold. |
| 5 | ON_OFF | input | Enable pin in which a low level turns the chip on and a high level turns it off, and a floating pin defaults to low; the datasheet gives an off threshold of 1.4 V and an on threshold of 0.8 V. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | TO-263-5L |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (LM2595-5.0) | VOUT | 4.8 | 5 | 5.2 | V | VIN=7V～40V, ILOAD=0.2A～3A | 4 |
| Input operating voltage | VIN | 4.5 | 40 | V | 5 | ||
| Standby current | ISTBY | 80 | 200 | uA | VON_OFF=5V | 5 | |
| Quiescent operating current | IQ | 2 | 10 | mA | VON_OFF=0V, VFB=VIN | 5 | |
| Oscillator (operating) frequency | FOSC | 127 | 150 | 173 | kHz | 5 | |
| Current limit | IL | 3.6 | 4.8 | 6.9 | A | VFB=0 | 5 |
| ON_OFF pin threshold voltage, high (control off) | VON_OFF | 1.4 | V | 5 | |||
| ON_OFF pin threshold voltage, low (control on) | VON_OFF | 0.8 | V | 5 | |||
| Switch pin leakage current, IH | IH | 5 | 15 | µA | VON_OFF=2.5V(ON) | 5 | |
| Switch pin leakage current, IL | IL | 0.2 | 5 | µA | VON_OFF=2.5V(ON) | 5 | |
| Saturation voltage | VCE | 1.3 | 1.5 | V | VFB=0V, LOUT=3A | 5 | |
| Maximum duty cycle | DMAX | 100 | % | CFB=0V | 5 | ||
| Thermal resistance, junction to ambient (no heatsink) | RJA | 50 | ℃/W | TO220, TO263 package, no heatsink | 5 | ||
| Input supply voltage (LM2595) | VIN | 40 | V | 3 | |||
| Voltage feedback pin voltage | VFB | -0.3 | V | Upper limit printed as VIN | 3 | ||
| Switch pin voltage (ON_OFF) | VON_OFF | -0.3 | V | Upper limit printed as VIN | 3 | ||
| Power transistor output pin voltage | VOUT | -0.3 | V | Upper limit printed as VIN | 3 | ||
| Operating junction temperature (absolute maximum table) | TJ | -40 | 125 | ℃ | 3 | ||
| Storage temperature | TSTG | -65 | 150 | ℃ | 3 | ||
| Lead soldering temperature | TLEAD | 245 | ℃ | Wire soldering, 10 s | 3 | ||
| ESD capability (human body model) | ESD | 2000 | V | Human body model | 3 | ||
| Input voltage (recommended) | VIN | 5 | 40 | V | 3 | ||
| Operating junction temperature range (recommended) | TJ | -40 | 125 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
LM2595S-5.0RG - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5L (KiCad packages3D, STEP)
- 3D model files:
lm2595s-5-0rg-etched.step/lm2595s-5-0rg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2595s-5-0rg.step/lm2595s-5-0rg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (12 pp, sha256
a38c73808e083841, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2595S-5.0RG
**HANSCHIP semiconductor** · DC-DC Converters · TO-263-5L
LM2595S-5.0RG from HANSCHIP semiconductor, in a TO-263-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT | output | Power switch output pin that forms the switching node and supplies the output load. |
| 2 | VIN | power_in | Supply input that requires a DC source of 4.5 V to 40 V, with a large-value capacitor placed between VIN and GND to filter supply noise. |
| 3 | GND | power_in | Ground pin that should be laid out so its return path avoids the Schottky diode output point, limiting switching-current spike noise. |
| 4 | FEEDBACK | input | Voltage feedback pin that senses the output through an external resistor divider and regulates to a 1.23 V threshold. |
| 5 | ON_OFF | input | Enable pin in which a low level turns the chip on and a high level turns it off, and a floating pin defaults to low; the datasheet gives an off threshold of 1.4 V and an on threshold of 0.8 V. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | TO-263-5L |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (LM2595-5.0) | VOUT | 4.8 | 5 | 5.2 | V | VIN=7V～40V, ILOAD=0.2A～3A | 4 |
| Input operating voltage | VIN | 4.5 | | 40 | V | | 5 |
| Standby current | ISTBY | | 80 | 200 | uA | VON_OFF=5V | 5 |
| Quiescent operating current | IQ | | 2 | 10 | mA | VON_OFF=0V, VFB=VIN | 5 |
| Oscillator (operating) frequency | FOSC | 127 | 150 | 173 | kHz | | 5 |
| Current limit | IL | 3.6 | 4.8 | 6.9 | A | VFB=0 | 5 |
| ON_OFF pin threshold voltage, high (control off) | VON_OFF | 1.4 | | | V | | 5 |
| ON_OFF pin threshold voltage, low (control on) | VON_OFF | | | 0.8 | V | | 5 |
| Switch pin leakage current, IH | IH | | 5 | 15 | µA | VON_OFF=2.5V(ON) | 5 |
| Switch pin leakage current, IL | IL | | 0.2 | 5 | µA | VON_OFF=2.5V(ON) | 5 |
| Saturation voltage | VCE | | 1.3 | 1.5 | V | VFB=0V, LOUT=3A | 5 |
| Maximum duty cycle | DMAX | | | 100 | % | CFB=0V | 5 |
| Thermal resistance, junction to ambient (no heatsink) | RJA | | | 50 | ℃/W | TO220, TO263 package, no heatsink | 5 |
| Input supply voltage (LM2595) | VIN | | | 40 | V | | 3 |
| Voltage feedback pin voltage | VFB | -0.3 | | | V | Upper limit printed as VIN | 3 |
| Switch pin voltage (ON_OFF) | VON_OFF | -0.3 | | | V | Upper limit printed as VIN | 3 |
| Power transistor output pin voltage | VOUT | -0.3 | | | V | Upper limit printed as VIN | 3 |
| Operating junction temperature (absolute maximum table) | TJ | -40 | | 125 | ℃ | | 3 |
| Storage temperature | TSTG | -65 | | 150 | ℃ | | 3 |
| Lead soldering temperature | TLEAD | | | 245 | ℃ | Wire soldering, 10 s | 3 |
| ESD capability (human body model) | ESD | | | 2000 | V | Human body model | 3 |
| Input voltage (recommended) | VIN | 5 | | 40 | V | | 3 |
| Operating junction temperature range (recommended) | TJ | -40 | | 125 | ℃ | | 3 |
## CAD (KiCad official)
- Symbol: `LM2595S-5.0RG`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5L (KiCad packages3D, STEP)
- 3D model files: `lm2595s-5-0rg-etched.step` / `lm2595s-5-0rg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2595s-5-0rg.step` / `lm2595s-5-0rg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HANSCHIP semiconductor datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757726602413522944) (12 pp, sha256 `a38c73808e083841`, retrieved 2026-10-19, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2595s-5-0rg-datasheet.pdf)