main
Ray
lm2594hvmx-5-0: laser-etched CAD + chip hero (factory 2.0.0 backfill)
f5a4df7
LM2594HVMX-5.0
Texas Instruments LM2594HVMX 5 0 NOPB · DC-DC Converters · SOIC-8
LM2594HVMX-5.0 from Texas Instruments LM2594HVMX 5 0 NOPB, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Datasheet notes the pin must be soldered to the PCB for best heat transfer. |
| 2 | NC | unconnected | No internal connection. Datasheet notes the pin must be soldered to the PCB for best heat transfer. |
| 3 | NC | unconnected | No internal connection. Datasheet notes the pin must be soldered to the PCB for best heat transfer. |
| 4 | Feedback | input | Senses the regulated output voltage to close the internal feedback loop. For fixed 5-V output versions, this pin is tied to the regulated 5-V output node. Absolute-maximum voltage range -0.3 V to 25 V. |
| 5 | ON/OFF | input | TTL-level shutdown input. Pulling the pin below ~1.3 V enables the regulator; pulling it above 1.3 V (up to 25 V) shuts the regulator down, dropping input supply current to approximately 80 uA. If shutdown is unused, tie to GND or leave open (regulator ON). |
| 6 | Ground | power_in | Circuit ground / power return for the IC. |
| 7 | +VIN | power_in | Positive input supply for the switching regulator. Recommended operating range 4.5 V to 60 V (HV version); absolute max 60 V. A local input bypass capacitor is required at this pin to minimize voltage transients and to supply the pulsed switching currents. |
| 8 | Output | output | Internal power-switch output that drives the external inductor and catch diode. The pin swings between (+VIN - VSAT) and approximately -0.5 V at ~150 kHz with duty cycle VOUT/VIN. Keep the PCB copper area on this node small to minimize EMI coupling. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments LM2594HVMX 5 0 NOPB |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
LM2594HVMX-5.0LM2594HVM-5.0LM2594HVMX-5.0LM2594HVM-5.0/NOPBLM2594HVMX-5.0LM2594HVMX-5.0/NOPBLM2594HVMX-5.0LM2594HVN-5.0
CAD (KiCad official)
- Symbol:
LM2594HVMX-5.0 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm2594hvmx-5-0-etched.step/lm2594hvmx-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2594hvmx-5-0.step/lm2594hvmx-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments LM2594HVMX 5 0 NOPB datasheet (None pp, sha256
0513c96573a7e0c1, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2594HVMX-5.0
**Texas Instruments LM2594HVMX 5 0 NOPB** · DC-DC Converters · SOIC-8
LM2594HVMX-5.0 from Texas Instruments LM2594HVMX 5 0 NOPB, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Datasheet notes the pin must be soldered to the PCB for best heat transfer. |
| 2 | NC | unconnected | No internal connection. Datasheet notes the pin must be soldered to the PCB for best heat transfer. |
| 3 | NC | unconnected | No internal connection. Datasheet notes the pin must be soldered to the PCB for best heat transfer. |
| 4 | Feedback | input | Senses the regulated output voltage to close the internal feedback loop. For fixed 5-V output versions, this pin is tied to the regulated 5-V output node. Absolute-maximum voltage range -0.3 V to 25 V. |
| 5 | ON/OFF | input | TTL-level shutdown input. Pulling the pin below ~1.3 V enables the regulator; pulling it above 1.3 V (up to 25 V) shuts the regulator down, dropping input supply current to approximately 80 uA. If shutdown is unused, tie to GND or leave open (regulator ON). |
| 6 | Ground | power_in | Circuit ground / power return for the IC. |
| 7 | +VIN | power_in | Positive input supply for the switching regulator. Recommended operating range 4.5 V to 60 V (HV version); absolute max 60 V. A local input bypass capacitor is required at this pin to minimize voltage transients and to supply the pulsed switching currents. |
| 8 | Output | output | Internal power-switch output that drives the external inductor and catch diode. The pin swings between (+VIN - VSAT) and approximately -0.5 V at ~150 kHz with duty cycle VOUT/VIN. Keep the PCB copper area on this node small to minimize EMI coupling. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments LM2594HVMX 5 0 NOPB |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
- `LM2594HVMX-5.0LM2594HVM-5.0`
- `LM2594HVMX-5.0LM2594HVM-5.0/NOPB`
- `LM2594HVMX-5.0`
- `LM2594HVMX-5.0/NOPB`
- `LM2594HVMX-5.0LM2594HVN-5.0`
## CAD (KiCad official)
- Symbol: `LM2594HVMX-5.0`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `lm2594hvmx-5-0-etched.step` / `lm2594hvmx-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2594hvmx-5-0.step` / `lm2594hvmx-5-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments LM2594HVMX 5 0 NOPB datasheet](https://www.ti.com/lit/ds/symlink/lm2594hvmx-5.0.pdf) (None pp, sha256 `0513c96573a7e0c1`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2594hvmx-5-0-datasheet.pdf)