Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
LM258WYPT
STMicroelectronics · Operational Amplifier · TSSOP-8
LM258WYPT from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output 1 | output | Output voltage from first operational amplifier with swing from 0 V to (VCC+) - 1.5 V. |
| 2 | Inverting input | input | Inverting input of first operational amplifier with common-mode input voltage range from 0 V to (VCC+) - 1.5 V. |
| 3 | Non-inverting input | input | Non-inverting input of first operational amplifier with common-mode input voltage range from 0 V to (VCC+) - 1.5 V. |
| 4 | VCC- | power_in | Negative supply voltage (ground in single-supply operation). |
| 5 | Non-inverting input 2 | input | Non-inverting input of second operational amplifier with common-mode input voltage range from 0 V to (VCC+) - 1.5 V. |
| 6 | Inverting input 2 | input | Inverting input of second operational amplifier with common-mode input voltage range from 0 V to (VCC+) - 1.5 V. |
| 7 | Output 2 | output | Output voltage from second operational amplifier with swing from 0 V to (VCC+) - 1.5 V. |
| 8 | VCC+ | power_in | Positive supply voltage with operating range from 3 V to 30 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (operating) | VCC+ | 3 | 30 | V | 5 | ||
| Common mode input voltage range (operating) | Vicm | -0.3 | V | Max is VCC -1.5 V as printed; printed min is VDD -0.3 V | 5 | ||
| Operating free air temperature range (LM258W) | Toper | -40 | 105 | °C | 5 | ||
| Supply voltage | VCC+ | 32 | V | 4 | |||
| Input voltage | Vin | -0.3 | V | Max is VCC+ +0.3 V as printed | 4 | ||
| Differential input voltage | Vid | -0.3 | V | Max is VCC+ +0.3 V as printed | 4 | ||
| Input current | Iin | 5 | mA | DC; 50 mA AC (duty cycle 10%, T=1 s) | 4 | ||
| Operating free-air temperature range (LM258W) | Toper | -40 | 105 | °C | 4 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| ESD HBM (human body model) | 2 | kV | HBM: 100 pF through 1.5 kΩ | 4 | |||
| ESD MM (machine model) | 200 | V | MM: 200 pF, internal resistor < 5 Ω | 4 | |||
| ESD CDM (charged device model) | 1.5 | kV | CDM | 4 | |||
| Thermal resistance junction-to-ambient, TSSOP8 | Rthja | 120 | °C/W | Typical value | 4 | ||
| Thermal resistance junction-to-case, TSSOP8 | Rthjc | 37 | °C/W | Typical value | 4 | ||
| Input offset voltage drift | ΔVio/ΔT | 7 | 30 | µV/°C | 6 | ||
| Input offset current | Iio | 2 | 30 | nA | 6 | ||
| Input offset current | Iio | 40 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current drift | ΔIio/ΔT | 10 | 300 | pA/°C | 6 | ||
| Input bias current | Iib | 20 | 150 | nA | 6 | ||
| Input bias current | Iib | 200 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Large signal voltage gain | Avd | 25 | 100 | V/mV | VCC+ = +15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V, Tmin ≤ Tamb ≤ Tmax | 6 | |
| Supply voltage rejection ratio | SVR | 65 | dB | Rs ≤ 10 kΩ, VCC+ = 5 V to 30 V | 6 | ||
| Supply current, all amp, no load | ICC | 0.7 | mA | VCC+ = +5 V | 6 | ||
| Supply current, all amp, no load | ICC | 1.2 | mA | Tmin ≤ Tamb ≤ Tmax, VCC+ = +5 V | 6 | ||
| Supply current, all amp, no load | ICC | 2 | mA | Tmin ≤ Tamb ≤ Tmax, VCC+ = +30 V | 6 | ||
| Input common mode voltage range | Vicm | 0 | V | VCC+ = +30 V, Tamb = +25 °C; max is VCC+ -1.5 V | 7 | ||
| Common mode rejection ratio | CMR | 70 | dB | Rs ≤ 10 kΩ | 7 | ||
| Common mode rejection ratio | CMR | 60 | dB | Rs ≤ 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Output current source | Isource | 20 | 40 | 60 | mA | VCC+ = +15 V, Vo = +2 V, Vid = +1 V | 7 |
| Output sink current | Isink | 10 | 20 | mA | VCC+ = +15 V, Vo = +2 V, Vid = -1 V | 7 | |
| Output sink current | Isink | 12 | 50 | µA | VCC+ = +15 V, Vo = +0.2 V, Vid = -1 V | 7 | |
| High level output voltage | VOH | 26 | V | RL = 2 kΩ, VCC+ = 30 V | 7 | ||
| High level output voltage | VOH | 27 | V | RL = 10 kΩ, VCC+ = 30 V | 7 | ||
| Low level output voltage | VOL | 5 | 20 | mV | RL = 10 kΩ | 7 | |
| Low level output voltage | VOL | 20 | mV | RL = 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Slew rate | SR | 0.3 | 0.6 | V/µs | VCC+ = 15 V, Vi = 0.5 to 3 V, RL = 2 kΩ, CL = 100 pF, unity gain | 7 | |
| Gain bandwidth product | GBP | 0.7 | 1.1 | MHz | VCC+ = 30 V, f = 100 kHz, Vin = 10 mV, RL = 2 kΩ, CL = 100 pF | 7 |
CAD (KiCad official)
- Symbol:
LM258WYPT - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm258wypt-etched.step/lm258wypt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm258wypt.step/lm258wypt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (20 pp, sha256
fee8e74ae62aedbe, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).