Generated by adom_assets · KiCad file format 20240108
LM258APT
STMicroelectronics · Operational Amplifier · TSSOP-8 (ST TSSOP8)
LM258APT from STMicroelectronics, in a TSSOP-8 (ST TSSOP8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Output of amplifier 1, swinging from 0 V to (VCC+ - 1.5 V) with output short-circuit current of approximately 40 mA. |
| 2 | In1- | input | Inverting input of amplifier 1, with common-mode range from VCC- to (VCC+ - 1.5 V) at 25 °C and input voltage of -0.3 to 32 V. |
| 3 | In1+ | input | Non-inverting input of amplifier 1, with common-mode range from VCC- to (VCC+ - 1.5 V) at 25 °C and input voltage of -0.3 to 32 V. |
| 4 | Vcc- | power_in | Negative supply voltage, ground in single-supply operation. |
| 5 | In2+ | input | Non-inverting input of amplifier 2, with common-mode range from VCC- to (VCC+ - 1.5 V) at 25 °C and input voltage of -0.3 to 32 V. |
| 6 | In2- | input | Inverting input of amplifier 2, with common-mode range from VCC- to (VCC+ - 1.5 V) at 25 °C and input voltage of -0.3 to 32 V. |
| 7 | Out2 | output | Output of amplifier 2, swinging from 0 V to (VCC+ - 1.5 V) with output short-circuit current of approximately 40 mA. |
| 8 | Vcc+ | power_in | Positive supply voltage, operating range 3 V to 30 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 (ST TSSOP8) |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | Vio | 1 | 3 | mV | Tamb = 25 °C; VCC+ = 5 V, VCC- = GND, Vo = 1.4 V (LM258A row) | 7 | |
| Input offset voltage | Vio | 4 | mV | Tmin ≤ Tamb ≤ Tmax (LM158A, LM258A, LM358A row) | 7 | ||
| Input offset voltage drift | ΔVio/ΔT | 7 | 15 | µV/°C | LM158A, LM258A, LM358A row | 7 | |
| Input offset current | Iio | 2 | 10 | nA | Tamb = 25 °C (LM158A, LM258A, LM358A row) | 7 | |
| Input offset current | Iio | 30 | nA | Tmin ≤ Tamb ≤ Tmax (LM158A, LM258A, LM358A row) | 7 | ||
| Input offset current drift | ΔIio/ΔT | 10 | 200 | pA/°C | LM158A, LM258A, LM358A row | 7 | |
| Input bias current | Iib | 20 | 50 | nA | Tamb = 25 °C (LM158A, LM258A, LM358A row) | 7 | |
| Input bias current | Iib | 100 | nA | Tmin ≤ Tamb ≤ Tmax (LM158A, LM258A, LM358A row) | 7 | ||
| Large signal voltage gain | Avd | 50 | 100 | V/mV | VCC+ = 15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V | 7 | |
| Large signal voltage gain | Avd | 25 | V/mV | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Supply voltage rejection ratio | SVR | 65 | 100 | dB | VCC+ = 5 V to 30 V, Rs ≤ 10 kΩ | 7 | |
| Supply voltage rejection ratio | SVR | 65 | dB | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Supply current, all amp, no load | ICC | 0.7 | 1.2 | mA | Tmin ≤ Tamb ≤ Tmax, VCC+ = 5 V | 7 | |
| Supply current, all amp, no load | ICC | 2 | mA | Tmin ≤ Tamb ≤ Tmax, VCC+ = 30 V | 7 | ||
| Common mode rejection ratio | CMR | 70 | 85 | dB | Rs ≤ 10 kΩ | 7 | |
| Common mode rejection ratio | CMR | 60 | dB | Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Output current source | Isource | 20 | 40 | 60 | mA | VCC+ = 15 V, Vo = 2 V, Vid = 1 V | 7 |
| Output sink current | Isink | 10 | 20 | mA | VCC+ = 15 V, Vo = 2 V, Vid = -1 V | 7 | |
| Output sink current | Isink | 12 | 50 | µA | VCC+ = 15 V, Vo = 0.2 V, Vid = -1 V | 7 | |
| High level output voltage | VOH | 26 | 27 | V | VCC+ = 30 V, RL = 2 kΩ connected to VCC-, Tamb = 25 °C | 8 | |
| High level output voltage | VOH | 26 | V | VCC+ = 30 V, RL = 2 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax | 8 | ||
| High level output voltage | VOH | 27 | 28 | V | VCC+ = 30 V, RL = 10 kΩ connected to VCC-, Tamb = 25 °C | 8 | |
| High level output voltage | VOH | 27 | V | VCC+ = 30 V, RL = 10 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax | 8 | ||
| High level output voltage | VOH | 3.5 | V | VCC+ = 5 V, RL = 2 kΩ connected to VCC-, Tamb = 25 °C | 8 | ||
| High level output voltage | VOH | 3 | V | VCC+ = 5 V, RL = 2 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax | 8 | ||
| Low level output voltage | VOL | 5 | 20 | mV | RL = 10 kΩ connected to VCC-, Tamb = 25 °C | 8 | |
| Low level output voltage | VOL | 20 | mV | RL = 10 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax | 8 | ||
| Slew rate | SR | 0.3 | 0.6 | V/µs | VCC+ = 15 V, Vi = 0.5 to 3 V, RL = 2 kΩ, CL = 100 pF, unity gain | 8 | |
| Gain bandwidth product | GBP | 0.7 | 1.1 | MHz | VCC+ = 30 V, f = 100 kHz, Vin = 10 mV, RL = 2 kΩ, CL = 100 pF | 8 | |
| Input voltage | Vi | -0.3 | 32 | V | Absolute maximum | 5 | |
| Differential input voltage | Vid | -32 | 32 | V | Absolute maximum | 5 | |
| Input current | Iin | 5 | mA | DC | 5 | ||
| Input current | Iin | 50 | mA | AC (duty cycle = 10 %, T = 1 s) | 5 | ||
| Operating free-air temperature range | Toper | -40 | 105 | °C | LM258,A | 5 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Maximum junction temperature | Tj | 150 | °C | 5 | |||
| Supply voltage | VCC | 3 | 30 | V | 6 | ||
| Operating free air temperature range | Toper | -40 | 105 | °C | LM258 | 6 | |
| ESD HBM: human body model | 300 | V | Human body model | 5 | |||
| ESD MM: machine model | 200 | V | Machine model | 5 | |||
| ESD CDM: charged device model | 1.5 | kV | Charged device model | 5 | |||
| Total harmonic distortion | THD | 0.02 | % | f = 1 kHz, Av = 20 dB, RL = 2 kΩ, Vo = 2 Vpp, CL = 100 pF | 8 | ||
| Equivalent input noise voltage | en | 55 | f = 1 kHz, Rs = 100 Ω, VCC+ = 30 V | 8 | |||
| Channel separation | Vo1/Vo2 | 120 | dB | 1 kHz ≤ f ≤ 20 kHz | 8 | ||
| Thermal resistance junction to ambient, TSSOP8 | Rthja | 120 | °C/W | Typical value (note 3) | 5 | ||
| Thermal resistance junction to case, TSSOP8 | Rthjc | 37 | °C/W | Typical value (note 3) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Updated: related products on the cover page. Updated: Section 3: "Absolute maximum ratings", Table 2: | 24 |
CAD (Adom-generated)
- Symbol:
LM258APT - Footprint:
Adom_Gen:STMicroelectronics_TSSOP8 - 3D model: generated to fit the land (STEP)
- 3D model files:
lm258apt-etched.step/lm258apt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm258apt.step/lm258apt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet, copy hosted by JLCPCB (25 pp, sha256
40a2550bed90848d, retrieved 2026-11-21) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Its own sheet (sha 40a2550bed90) prints no TSSOP8 land; ST's printed TSSOP8 land, M24512 DS6520 Rev 31 p.32 Figure 18 (TSSOP8 - Recommended footprint): 1.0 x 0.35 mm pads, pitch 0.65, 7.0 outer, rows 6.0 c-c. Same package: this part's own outline on record (LM258APT-dims.extracted.json, TSSOP8 p.21): body (2.9, 3.1) x (4.3, 4.5), lead span (6.2, 6.6), pitch 0.65 = ST TSSOP8 (D 2.9/3.0/3.1, E1 4.3/4.4/4.5, E 6.2/6.4/6.6, e 0.65). Shared land Adom_Gen:STMicroelectronics_TSSOP8. Task master ruling 2026-11-21 (ST TSSOP8).