← Commit history

lm2586sx-adj: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·7f7dcb5858 · ·parent be02f39
2 files changed +88−8
package.json+46−6
@@ -53,25 +53,25 @@         "number": "1",         "name": "ON/OFF (FREQ ADJ)",         "type": "input",-        "description": "External shutdown / frequency-adjust pin (absolute max \u22120.4V \u2264 VSH \u2264 6V); sourcing \u22653V into this pin (typical threshold 1.6V, min 1.0V/0.8V, max 2.2V/2.4V, typical pin current 40\u00b5A) shuts the device down; alternatively a resistor from this pin to ground sets the switching frequency from 100kHz (pin open) up to 200kHz (RSET=22k\u03a9); leave floating through an isolation diode for normal operation."+        "description": "External shutdown / frequency-adjust pin (absolute max −0.4V ≤ VSH ≤ 6V); sourcing ≥3V into this pin (typical threshold 1.6V, min 1.0V/0.8V, max 2.2V/2.4V, typical pin current 40µA) shuts the device down; alternatively a resistor from this pin to ground sets the switching frequency from 100kHz (pin open) up to 200kHz (RSET=22kΩ); leave floating through an isolation diode for normal operation."       },       {         "number": "4",         "name": "GND",         "type": "power_in",-        "description": "Ground/return pin for the IC; a Schottky diode can be connected between the Switch pin (5) and this ground pin (4) to clamp negative ringing on the Switch node from dropping below \u22120.4V."+        "description": "Ground/return pin for the IC; a Schottky diode can be connected between the Switch pin (5) and this ground pin (4) to clamp negative ringing on the Switch node from dropping below −0.4V."       },       {         "number": "5",         "name": "SWITCH",         "type": "output",-        "description": "Collector of the internal 3A NPN power switch; absolute maximum \u22120.4V \u2264 VSW \u2264 65V (recommended 0V \u2264 VSW \u2264 60V); switch current is internally limited (typical 4.0A, min 3.0A, max 7.0A) with a typical saturation voltage of 0.45V at 3A; connects to the external inductor/transformer primary."+        "description": "Collector of the internal 3A NPN power switch; absolute maximum −0.4V ≤ VSW ≤ 65V (recommended 0V ≤ VSW ≤ 60V); switch current is internally limited (typical 4.0A, min 3.0A, max 7.0A) with a typical saturation voltage of 0.45V at 3A; connects to the external inductor/transformer primary."       },       {         "number": "6",         "name": "SYNC",         "type": "input",-        "description": "Frequency-synchronization input, absolute maximum \u22120.4V \u2264 VSYNC \u2264 2V; a negative-going pulse applied here (threshold typically 0.75V at 200kHz, pin current ~100\u00b5A typ/200\u00b5A max) synchronizes the internal oscillator to an external clock so multiple devices can run at the same switching frequency."+        "description": "Frequency-synchronization input, absolute maximum −0.4V ≤ VSYNC ≤ 2V; a negative-going pulse applied here (threshold typically 0.75V at 200kHz, pin current ~100µA typ/200µA max) synchronizes the internal oscillator to an external clock so multiple devices can run at the same switching frequency."       }     ],     "provenance": {@@ -110,6 +110,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm2586sx-adj.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "34b8121b216e7b6490402befe573a69b06919acafd33d6e8da88bd238574da52",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm2586sx-adj-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "9e7fa90c259b78a977b3a367c5e79e609dfbdeef43e14b1dfee16db0ac88a9b0",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -95,7 +95,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm2586sx-adj.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "34b8121b216e7b6490402befe573a69b06919acafd33d6e8da88bd238574da52",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm2586sx-adj-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "9e7fa90c259b78a977b3a367c5e79e609dfbdeef43e14b1dfee16db0ac88a9b0",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -142,4 +182,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}