← Commit history
page.json+8−5@@ -38,25 +38,25 @@ "number": "1", "name": "ON/OFF (FREQ ADJ)", "type": "input",- "description": "External shutdown / frequency-adjust pin (absolute max \u22120.4V \u2264 VSH \u2264 6V); sourcing \u22653V into this pin (typical threshold 1.6V, min 1.0V/0.8V, max 2.2V/2.4V, typical pin current 40\u00b5A) shuts the device down; alternatively a resistor from this pin to ground sets the switching frequency from 100kHz (pin open) up to 200kHz (RSET=22k\u03a9); leave floating through an isolation diode for normal operation."+ "description": "External shutdown / frequency-adjust pin (absolute max −0.4V ≤ VSH ≤ 6V); sourcing ≥3V into this pin (typical threshold 1.6V, min 1.0V/0.8V, max 2.2V/2.4V, typical pin current 40µA) shuts the device down; alternatively a resistor from this pin to ground sets the switching frequency from 100kHz (pin open) up to 200kHz (RSET=22kΩ); leave floating through an isolation diode for normal operation." }, { "number": "4", "name": "GND", "type": "power_in",- "description": "Ground/return pin for the IC; a Schottky diode can be connected between the Switch pin (5) and this ground pin (4) to clamp negative ringing on the Switch node from dropping below \u22120.4V."+ "description": "Ground/return pin for the IC; a Schottky diode can be connected between the Switch pin (5) and this ground pin (4) to clamp negative ringing on the Switch node from dropping below −0.4V." }, { "number": "5", "name": "SWITCH", "type": "output",- "description": "Collector of the internal 3A NPN power switch; absolute maximum \u22120.4V \u2264 VSW \u2264 65V (recommended 0V \u2264 VSW \u2264 60V); switch current is internally limited (typical 4.0A, min 3.0A, max 7.0A) with a typical saturation voltage of 0.45V at 3A; connects to the external inductor/transformer primary."+ "description": "Collector of the internal 3A NPN power switch; absolute maximum −0.4V ≤ VSW ≤ 65V (recommended 0V ≤ VSW ≤ 60V); switch current is internally limited (typical 4.0A, min 3.0A, max 7.0A) with a typical saturation voltage of 0.45V at 3A; connects to the external inductor/transformer primary." }, { "number": "6", "name": "SYNC", "type": "input",- "description": "Frequency-synchronization input, absolute maximum \u22120.4V \u2264 VSYNC \u2264 2V; a negative-going pulse applied here (threshold typically 0.75V at 200kHz, pin current ~100\u00b5A typ/200\u00b5A max) synchronizes the internal oscillator to an external clock so multiple devices can run at the same switching frequency."+ "description": "Frequency-synchronization input, absolute maximum −0.4V ≤ VSYNC ≤ 2V; a negative-going pulse applied here (threshold typically 0.75V at 200kHz, pin current ~100µA typ/200µA max) synchronizes the internal oscillator to an external clock so multiple devices can run at the same switching frequency." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/lm2586sx-adj-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }