← Commit history
README.mdadded+41@@ -0,0 +1,41 @@+# LM2586SX-ADJ++**Texas Instruments** · DC-DC Converters · TO-263-7++LM2586SX-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ON/OFF (FREQ ADJ) | input | External shutdown / frequency-adjust pin (absolute max −0.4V ≤ VSH ≤ 6V); sourcing ≥3V into this pin (typical threshold 1.6V, min 1.0V/0.8V, max 2.2V/2.4V, typical pin current 40µA) shuts the device down; alternatively a resistor from this pin to ground sets the switching frequency from 100kHz (pin open) up to 200kHz (RSET=22kΩ); leave floating through an isolation diode for normal operation. |+| 4 | GND | power_in | Ground/return pin for the IC; a Schottky diode can be connected between the Switch pin (5) and this ground pin (4) to clamp negative ringing on the Switch node from dropping below −0.4V. |+| 5 | SWITCH | output | Collector of the internal 3A NPN power switch; absolute maximum −0.4V ≤ VSW ≤ 65V (recommended 0V ≤ VSW ≤ 60V); switch current is internally limited (typical 4.0A, min 3.0A, max 7.0A) with a typical saturation voltage of 0.45V at 3A; connects to the external inductor/transformer primary. |+| 6 | SYNC | input | Frequency-synchronization input, absolute maximum −0.4V ≤ VSYNC ≤ 2V; a negative-going pulse applied here (threshold typically 0.75V at 200kHz, pin current ~100µA typ/200µA max) synchronizes the internal oscillator to an external clock so multiple devices can run at the same switching frequency. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TO-263-7 |+| Category | Power Management (PMIC) |+| Pins | 4 |++## CAD (KiCad official)++- Symbol: `LM2586SX-ADJ`+- Footprint: `Package_TO_SOT_SMD:TO-263-7_TabPin8`+- 3D model: TO-263-7 (KiCad packages3D, STEP)+- 3D model files: `lm2586sx-adj-etched.step` / `lm2586sx-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2586sx-adj.step` / `lm2586sx-adj.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm2586) (44 pp, sha256 `062506d4c1c2d784`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm2586sx-adj-datasheet.pdf)
page.jsonadded+121@@ -0,0 +1,121 @@+{+ "slug": "lm2586sx-adj",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, TO-263-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lm2586sx-adj",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm2586sx-adj.kicad_sym",+ "lm2586sx-adj.kicad_mod",+ "lm2586sx-adj.glb",+ "lm2586sx-adj.step",+ "lm2586sx-adj.lbr",+ "docs/hero.png",+ "docs/lm2586sx-adj-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LM2586SX-ADJ",+ "manufacturer": "Texas Instruments",+ "package": "TO-263-7",+ "pin_count": 4,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm2586",+ "parts": {+ "symbol": "lm2586sx-adj.kicad_sym",+ "footprint": "lm2586sx-adj.kicad_mod",+ "model_3d": "lm2586sx-adj-etched.glb",+ "model_3d_plain": "lm2586sx-adj.glb",+ "model_3d_step": "lm2586sx-adj-etched.step",+ "model_3d_step_plain": "lm2586sx-adj.step",+ "lbr": "lm2586sx-adj.lbr"+ },+ "distributor_links": {+ "lcsc": "C181324"+ },+ "pins": [+ {+ "number": "1",+ "name": "ON/OFF (FREQ ADJ)",+ "type": "input",+ "description": "External shutdown / frequency-adjust pin (absolute max −0.4V ≤ VSH ≤ 6V); sourcing ≥3V into this pin (typical threshold 1.6V, min 1.0V/0.8V, max 2.2V/2.4V, typical pin current 40µA) shuts the device down; alternatively a resistor from this pin to ground sets the switching frequency from 100kHz (pin open) up to 200kHz (RSET=22kΩ); leave floating through an isolation diode for normal operation."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground/return pin for the IC; a Schottky diode can be connected between the Switch pin (5) and this ground pin (4) to clamp negative ringing on the Switch node from dropping below −0.4V."+ },+ {+ "number": "5",+ "name": "SWITCH",+ "type": "output",+ "description": "Collector of the internal 3A NPN power switch; absolute maximum −0.4V ≤ VSW ≤ 65V (recommended 0V ≤ VSW ≤ 60V); switch current is internally limited (typical 4.0A, min 3.0A, max 7.0A) with a typical saturation voltage of 0.45V at 3A; connects to the external inductor/transformer primary."+ },+ {+ "number": "6",+ "name": "SYNC",+ "type": "input",+ "description": "Frequency-synchronization input, absolute maximum −0.4V ≤ VSYNC ≤ 2V; a negative-going pulse applied here (threshold typically 0.75V at 200kHz, pin current ~100µA typ/200µA max) synchronizes the internal oscillator to an external clock so multiple devices can run at the same switching frequency."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: TO-263-7 package pinout diagram on page 3 not fully captured in text extraction; pin numbering confi; Pin 1 has dual-function capability: operation as ON/OFF shutdown control with voltage threshold (1.0",+ "exposed pad 8 added from the footprint",+ "1/8 pin names appear NOWHERE in the datasheet text: ['4:GND@p3']"+ ],+ "pages_sent": 44,+ "cost_usd": 0.4643,+ "at": "2026-09-24T10:59:53"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm2586",+ "pages": 44,+ "sha256": "062506d4c1c2d784",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 4,+ "described": 4,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}