main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm258: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm258: viewers · Ray
lm258-etched.fit.json lm258: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm258-etched.glb lm258: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray
lm258-etched.step lm258: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray
lm258.glb Publish 0.1.0 · Ray
lm258.kicad_mod Publish 0.1.0 · Ray
lm258.kicad_sym Publish 0.1.0 · Ray
lm258.lbr Publish 0.1.0 · Ray
lm258.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json lm258: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray
README.md lm258: specified limits as data (metadata.characteristics, 24 rows from the datasheet) · Ray

LM258

IDCHIP · Operational Amplifier · SOIC-8

LM258 from IDCHIP, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of op-amp channel 1. Can source ~40 mA and sink ~15 mA at VCC=15V.
2 1IN- input Inverting input of op-amp channel 1. Input bias current typ ±45 nA, max ±150 nA at VCM=0V.
3 1IN+ input Non-inverting input of op-amp channel 1. Common-mode input voltage range 0 V to VCC-1.5 V.
4 GND power_in Ground / negative supply (VEE). Connect to 0 V for single-supply operation or to negative rail for dual-supply operation (down to -16 V).
5 2IN+ input Non-inverting input of op-amp channel 2. Common-mode input voltage range 0 V to VCC-1.5 V.
6 2IN- input Inverting input of op-amp channel 2. Input bias current typ ±45 nA, max ±150 nA at VCM=0V.
7 2OUT output Output of op-amp channel 2. Can source ~40 mA and sink ~15 mA at VCC=15V.
8 VCC power_in Positive supply voltage. Absolute max 32 V (single supply) or ±16 V (split supply). Typical quiescent supply current 0.5 mA at VCC=5V, 1 mA at VCC=30V.

Key specifications

Parameter Value
Manufacturer IDCHIP
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute max, printed as 32 or ±16) 32 V 2
Differential input voltage 32 V 2
Input voltage (range -0.3 to VCC) -0.3 V 2
Power dissipation (SOP package) 530 mW SOP package 2
Input current 50 mA VIN<-0.3V 2
Maximum junction temperature 150 ℃ 2
Storage temperature -65 150 ℃ 2
Operating ambient temperature -25 85 ℃ 2
Input offset voltage -5 2 5 mV Ta=25℃ 2
Input bias current -150 45 150 nA Ta=25℃, IIN(+) or IIN(-), VCM=0V 2
Input offset current -50 3 50 nA Ta=25℃, IIN(+) – IIN(-), VCM=0V 2
Input common-mode voltage range 0 V Ta=25℃, V+=30V 2
Supply current, all op-amps, RL=∞ (Vcc=30V) 1 2 mA RL=∞, Vcc=30V 2
Supply current, all op-amps, RL=∞ (Vcc=5V) 0.5 1.2 mA RL=∞, Vcc=5V 2
Large signal voltage gain 25 100 V/mV Vcc=15V, Ta=25℃, RL≥2kΩ (for Vo=1~11V) 2
Common-mode rejection ratio 70 90 dB DC, Ta=25℃, VCM=0~Vcc-1.5V 2
Power supply rejection ratio 65 100 dB DC, Ta=25℃, Vcc=5~30V 2
Output source current 20 40 mA VIN(+)=1V, VIN(-)=0V, Vcc=15V, Vo=2V, Ta=25℃ 2
Output sink current 10 15 mA VIN(-)=1V, VIN(+)=0V, Vcc=15V, Vo=2V, Ta=25℃ 2
Output sink current (small output) 12 50 µA VIN(-)=1V, VIN(+)=0V, Vcc=15V, Vo=200mV, Ta=25℃ 2
Output short-circuit current to ground 40 60 mA Vcc=15V, Ta=25℃ 2
Output voltage high swing VOH 26 V Vcc=30V, RL=2kΩ 2
Output voltage high swing VOH 27 28 V Vcc=30V, RL=10kΩ 2
Output voltage low swing VOL 5 20 mV Vcc=5V, RL=10kΩ 2

CAD (KiCad official)

  • Symbol: LM258
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm258-etched.step / lm258-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm258.step / lm258.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lm258.step 122 KB You want the bare part, or you mark your own boards.
lm258-etched.step 1.4 MB You want the part with LM258 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 336 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: IDCHIP datasheet (4 pp, sha256 4a36a2036c166471, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF