main
Ray Publish 0.1.0 e72b77e

LM2576S-ADJ-MS

MSKSEMI · DC-DC Converters · TO-263-5L

LM2576S-ADJ-MS from MSKSEMI, in a TO-263-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vin power_in Input supply voltage; the LM2576 operating supply range is 40V and the absolute maximum supply voltage is 45V.
2 Output output Switching output that drives the external inductor and catch diode; the output-to-ground steady-state voltage is limited to -1V.
3 Gnd power_in Ground reference pin for the regulator; single-point or ground-plane grounding is recommended for best results.
4 Feedback input Output voltage feedback input; for the adjustable version it is set by R1/R2 with VREF = 1.23V.
5 ON/OFF input Shutdown control where the output is enabled when the pin is Low or floating; the pin voltage range is -0.3V to +VIN.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer MSKSEMI
Package TO-263-5L
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VOUT Feedback Voltage VOUT 1.217 1.23 1.243 V VIN =12V, ILOAD =0.5A, VOUT =5V; Circuit of Figure 2 5
VOUT Feedback Voltage LM2576 VOUT 1.193 1.23 1.267 V 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 40V, VOUT =5V; Circuit of Figure 2 5
Feedback Bias Current Ib 50 100 nA VOUT =5V (Adjustable Version Only) 6
Oscillator Frequency fO 47 52 58 kHz (Note 8) 6
Saturation Voltage VSAT 1.4 1.8 V IOUT =3A (Note 4) 6
DC Max Duty Cycle (ON) DC 93 98 % (Note 5) 6
Current Limit ICL 4.2 5.8 6.9 A (Notes 4, 8) 6
Output Leakage Current IL 7.5 30 mA Output = -1V 6
Output Leakage Current IL 2 mA Output = -1V 6
Quiescent Current IQ 5 10 mA (Note 6) 6
Standby Quiescent Current ISTBY 50 200 µA ON/OFF Pin = 5V (OFF) 6
ON/OFF Pin Logic Input Level VIH VIH 2.2 1.4 V VOUT = 0V 6
ON/OFF Pin Logic Input Level VIL VIL 1.2 1 V VOUT = Nominal Output Voltage 6
ON/OFF Pin Input Current IIH IIH 12 30 µA ON/OFF Pin = 5V (OFF) 6
ON/OFF Pin Input Current IIL IIL 0 10 µA ON/OFF Pin = 0V (ON) 6
Maximum Supply Voltage 45 V LM2576 4
ON/OFF Pin Input Voltage -0.3 V -0.3V ≤ V ≤ +VIN 4
Output Voltage to Ground (Steady State) -1 V Steady State 4
Storage Temperature Range -65 150 °C 4
Maximum Junction Temperature 150 °C 4
Minimum ESD Rating 2 kV C= 100pF, R = 1.5 kΩ 4
Lead Temperature (Soldering, 10 Seconds) 260 °C Soldering, 10 Seconds 4
Supply Voltage 40 V LM2576 4
Operating Junction Temperature Range TJ -40 125 °C LM2576/LM2576HV 4

CAD (KiCad official)

  • Symbol: LM2576S-ADJ-MS
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5L (KiCad packages3D, STEP)
  • 3D model files: lm2576s-adj-ms-etched.step / lm2576s-adj-ms-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2576s-adj-ms.step / lm2576s-adj-ms.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MSKSEMI datasheet (12 pp, sha256 bc60041f4dd916f0, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF