LM2576S-5.0

{
 "schema": "adom.pads/1",
 "slug": "lm2576s-5-0",
 "footprint": "TO-263-5_TabPin6",
 "generated_from": {
  "footprint": "TO-263-5_TabPin6@sha256:77e8ff2d643255fc",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -7.65,
   -3.4
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TO-263-5_TabPin6@sha256:77e8ff2d643255fc"
 },
 "pad_count": 6,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6"
 ],
 "paste_apertures": 4,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    -3.4
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "VIN",
   "type": "power_in",
   "description": "Input supply voltage. Operating range 4.5V to 40V for LM2576 (up to 60V for LM2576HV). Absolute maximum 45V (63V HV). Bypass with a suitable input capacitor close to this pin.",
   "is_pin1": true,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    -1.7
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "Output",
   "type": "output",
   "description": "Switching output from the internal 3A power switch. Connects to the external catch diode (e.g. 1N5822) and the smoothing inductor (typ. 100µH). Steady-state output voltage may swing down to -1V relative to GND.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    0.0
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground reference for the internal regulator, oscillator, error amplifier, and power switch return.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    1.7
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "Feedback",
   "type": "input",
   "description": "Output voltage feedback input to the internal error amplifier. On fixed-voltage versions (like the -5.0), tie directly to the regulated output node so the internal divider senses VOUT (internal 1.23V band-gap reference).",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    3.4
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "ON/OFF",
   "type": "input",
   "description": "TTL-compatible active-low shutdown input. Low or floating enables the regulator; drive high to enter low-power standby mode (~50µA typ). Input range -0.3V to +VIN.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.5,
    0.0
   ],
   "rot": 0.0,
   "size": [
    9.4,
    10.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask"
   ],
   "thermal": false,
   "pin": "6",
   "name": "TAB",
   "type": "power_in",
   "description": "Exposed thermal pad. Present in the package land pattern; connect it per the manufacturer datasheet thermal recommendation. Added because the footprint carries this pad and the symbol had no pin for it.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}