main
Ray
Publish 0.1.0
b34d8f1
LM2576S-3.3RG
HANSCHIP semiconductor · DC-DC Converters · TO-263-5
LM2576S-3.3RG from HANSCHIP semiconductor, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply pin; maximum 40 V for LM2576 (55 V for LM2576HV). |
| 2 | Output | output | Switching output of the regulator; output voltage to ground (steady state) must not go below -1 V. |
| 3 | Ground | power_in | Ground pin; the package tab is also ground. |
| 4 | Feedback | input | Feedback sense input; on the fixed 3.3 V version it senses the output voltage. |
| 5 | ON/OFF | input | Active-low shutdown input with TTL capability; input range -0.3 V to VIN, high (about 5 V) turns the output off into standby of 50 uA typical. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 3.234 | 3.3 | 3.366 | V | VIN = 12V, Iload = 0.5A | 5 |
| Output voltage, line and load regulation (standard font, TJ=25°C) | VOUT | 3.168 | 3.3 | 3.432 | V | 6V≤VIN≤40V, 0.5A≤Iload≤3A (LM2576 non-HV column) | 5 |
| Output voltage, line and load regulation (bold, full operating junction temperature range) | VOUT | 3.135 | 3.3 | 3.465 | V | 6V≤VIN≤40V, 0.5A≤Iload≤3A (LM2576 non-HV column) | 5 |
| Oscillator frequency (standard font, TJ=25°C) | fO | 47 | 52 | 58 | kHz | 7 | |
| Oscillator frequency (bold, full operating junction temperature range) | fO | 42 | 52 | 63 | kHz | 7 | |
| Saturation voltage (standard font, TJ=25°C) | VSAT | 1.4 | 1.8 | V | IOUT = 3A (note 4) | 7 | |
| Saturation voltage (bold, full operating junction temperature range) | VSAT | 1.4 | 2 | V | IOUT = 3A (note 4) | 7 | |
| DC maximum duty cycle (ON) | DC | 93 | 98 | % | note 5 | 7 | |
| Current limit (standard font, TJ=25°C) | ICL | 4.2 | 5.8 | 6.9 | A | notes 4, 11 | 7 |
| Current limit (bold, full operating junction temperature range) | ICL | 3.5 | 5.8 | 7.5 | A | notes 4, 11 | 7 |
| Output leakage current | IL | 2 | mA | Output = 0V (notes 6, 7) | 7 | ||
| Output leakage current | IL | 7.5 | 30 | mA | Output = -1V (notes 6, 7) | 7 | |
| Quiescent current | IQ | 5 | 10 | mA | note 6 | 7 | |
| Standby quiescent current | ISTBY | 50 | 200 | µA | ON/OFF pin = 5V (off) | 7 | |
| ON/OFF control logic input level, high (standard font, TJ=25°C) | VIH | 2.2 | 1.4 | V | VOUT = 0V | 7 | |
| ON/OFF control logic input level, high (bold, full operating junction temperature range) | VIH | 2.4 | 1.4 | V | VOUT = 0V | 7 | |
| ON/OFF control logic input level, low (standard font, TJ=25°C) | VIL | 1.2 | 1 | V | VOUT = nominal input voltage | 7 | |
| ON/OFF control logic input level, low (bold, full operating junction temperature range) | VIL | 1.2 | 0.8 | V | VOUT = nominal input voltage | 7 | |
| ON/OFF control input current, high | IIH | 12 | 30 | µA | ON/OFF control = 5V (off) | 7 | |
| ON/OFF control input current, low | IIL | 0 | 10 | µA | ON/OFF control = 0V (on) | 7 | |
| Maximum supply voltage (LM2576, non-HV) | VIN | 40 | V | 4 | |||
| ON/OFF pin input voltage | VON_OFF | -0.3 | V | -0.3 ≤ V ≤ +VIN (upper limit printed as +VIN, not numeric) | 4 | ||
| Output voltage to ground (steady state) | -1 | V | steady state | 4 | |||
| Storage temperature range | TSTG | -65 | 150 | ℃ | 4 | ||
| Maximum junction temperature | TJ | 150 | ℃ | 4 | |||
| ESD rating | ESD | 2 | KV | C = 100 pF, R = 1.5 kΩ (minimum rating) | 4 | ||
| Lead temperature (soldering, 10 s) | TLEAD | 245 | ℃ | soldering, 10 s | 4 | ||
| Supply voltage (LM2576, non-HV) | VIN | 40 | V | 5 | |||
| Operating junction temperature range | TA | -40 | 125 | ℃ | 5 | ||
| Junction-to-ambient thermal resistance (TO-263) | RθJA | 42.6 | ℃/W | TO-263 column | 5 | ||
| Junction-to-case (top) thermal resistance (TO-263) | RθJC(top) | 43.3 | ℃/W | TO-263 column | 5 | ||
| Junction-to-board thermal resistance (TO-263) | RθJB | 22.4 | ℃/W | TO-263 column | 5 | ||
| Junction-to-top characterization parameter (TO-263) | ψJT | 10.7 | ℃/W | TO-263 column | 5 | ||
| Junction-to-board characterization parameter (TO-263) | ψJB | 21.3 | ℃/W | TO-263 column | 5 | ||
| Junction-to-case (bottom) thermal resistance (TO-263) | RθJC(bot) | 0.4 | ℃/W | TO-263 column | 5 | ||
| Junction-to-ambient thermal resistance, S-type (TO-263) | θJA | 50 | °C/W | note 10: 0.5 in² copper area | 7 |
CAD (KiCad official)
- Symbol:
LM2576S-3.3RG - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2576s-3-3rg-etched.step/lm2576s-3-3rg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2576s-3-3rg.step/lm2576s-3-3rg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (13 pp, sha256
49a38e15b1d76c58, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2576S-3.3RG
**HANSCHIP semiconductor** · DC-DC Converters · TO-263-5
LM2576S-3.3RG from HANSCHIP semiconductor, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply pin; maximum 40 V for LM2576 (55 V for LM2576HV). |
| 2 | Output | output | Switching output of the regulator; output voltage to ground (steady state) must not go below -1 V. |
| 3 | Ground | power_in | Ground pin; the package tab is also ground. |
| 4 | Feedback | input | Feedback sense input; on the fixed 3.3 V version it senses the output voltage. |
| 5 | ON/OFF | input | Active-low shutdown input with TTL capability; input range -0.3 V to VIN, high (about 5 V) turns the output off into standby of 50 uA typical. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 3.234 | 3.3 | 3.366 | V | VIN = 12V, Iload = 0.5A | 5 |
| Output voltage, line and load regulation (standard font, TJ=25°C) | VOUT | 3.168 | 3.3 | 3.432 | V | 6V≤VIN≤40V, 0.5A≤Iload≤3A (LM2576 non-HV column) | 5 |
| Output voltage, line and load regulation (bold, full operating junction temperature range) | VOUT | 3.135 | 3.3 | 3.465 | V | 6V≤VIN≤40V, 0.5A≤Iload≤3A (LM2576 non-HV column) | 5 |
| Oscillator frequency (standard font, TJ=25°C) | fO | 47 | 52 | 58 | kHz | | 7 |
| Oscillator frequency (bold, full operating junction temperature range) | fO | 42 | 52 | 63 | kHz | | 7 |
| Saturation voltage (standard font, TJ=25°C) | VSAT | | 1.4 | 1.8 | V | IOUT = 3A (note 4) | 7 |
| Saturation voltage (bold, full operating junction temperature range) | VSAT | | 1.4 | 2 | V | IOUT = 3A (note 4) | 7 |
| DC maximum duty cycle (ON) | DC | 93 | 98 | | % | note 5 | 7 |
| Current limit (standard font, TJ=25°C) | ICL | 4.2 | 5.8 | 6.9 | A | notes 4, 11 | 7 |
| Current limit (bold, full operating junction temperature range) | ICL | 3.5 | 5.8 | 7.5 | A | notes 4, 11 | 7 |
| Output leakage current | IL | | | 2 | mA | Output = 0V (notes 6, 7) | 7 |
| Output leakage current | IL | | 7.5 | 30 | mA | Output = -1V (notes 6, 7) | 7 |
| Quiescent current | IQ | | 5 | 10 | mA | note 6 | 7 |
| Standby quiescent current | ISTBY | | 50 | 200 | µA | ON/OFF pin = 5V (off) | 7 |
| ON/OFF control logic input level, high (standard font, TJ=25°C) | VIH | 2.2 | 1.4 | | V | VOUT = 0V | 7 |
| ON/OFF control logic input level, high (bold, full operating junction temperature range) | VIH | 2.4 | 1.4 | | V | VOUT = 0V | 7 |
| ON/OFF control logic input level, low (standard font, TJ=25°C) | VIL | | 1.2 | 1 | V | VOUT = nominal input voltage | 7 |
| ON/OFF control logic input level, low (bold, full operating junction temperature range) | VIL | | 1.2 | 0.8 | V | VOUT = nominal input voltage | 7 |
| ON/OFF control input current, high | IIH | | 12 | 30 | µA | ON/OFF control = 5V (off) | 7 |
| ON/OFF control input current, low | IIL | | 0 | 10 | µA | ON/OFF control = 0V (on) | 7 |
| Maximum supply voltage (LM2576, non-HV) | VIN | | | 40 | V | | 4 |
| ON/OFF pin input voltage | VON_OFF | -0.3 | | | V | -0.3 ≤ V ≤ +VIN (upper limit printed as +VIN, not numeric) | 4 |
| Output voltage to ground (steady state) | | -1 | | | V | steady state | 4 |
| Storage temperature range | TSTG | -65 | | 150 | ℃ | | 4 |
| Maximum junction temperature | TJ | | | 150 | ℃ | | 4 |
| ESD rating | ESD | 2 | | | KV | C = 100 pF, R = 1.5 kΩ (minimum rating) | 4 |
| Lead temperature (soldering, 10 s) | TLEAD | | | 245 | ℃ | soldering, 10 s | 4 |
| Supply voltage (LM2576, non-HV) | VIN | | | 40 | V | | 5 |
| Operating junction temperature range | TA | -40 | | 125 | ℃ | | 5 |
| Junction-to-ambient thermal resistance (TO-263) | RθJA | | 42.6 | | ℃/W | TO-263 column | 5 |
| Junction-to-case (top) thermal resistance (TO-263) | RθJC(top) | | 43.3 | | ℃/W | TO-263 column | 5 |
| Junction-to-board thermal resistance (TO-263) | RθJB | | 22.4 | | ℃/W | TO-263 column | 5 |
| Junction-to-top characterization parameter (TO-263) | ψJT | | 10.7 | | ℃/W | TO-263 column | 5 |
| Junction-to-board characterization parameter (TO-263) | ψJB | | 21.3 | | ℃/W | TO-263 column | 5 |
| Junction-to-case (bottom) thermal resistance (TO-263) | RθJC(bot) | | 0.4 | | ℃/W | TO-263 column | 5 |
| Junction-to-ambient thermal resistance, S-type (TO-263) | θJA | | 50 | | °C/W | note 10: 0.5 in² copper area | 7 |
## CAD (KiCad official)
- Symbol: `LM2576S-3.3RG`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files: `lm2576s-3-3rg-etched.step` / `lm2576s-3-3rg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2576s-3-3rg.step` / `lm2576s-3-3rg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HANSCHIP semiconductor datasheet](docs/lm2576s-3-3rg-datasheet.pdf) (13 pp, sha256 `49a38e15b1d76c58`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2576s-3-3rg-datasheet.pdf)