main
Ray
Publish 0.1.0
dda6ee5
LM2576S-12-MS
MSKSEMI · Linear Voltage Regulators (LDO) · TO-263-5
LM2576S-12-MS from MSKSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Input supply voltage; the LM2576 operating supply range is 40 V maximum and the LM2576HV is 57 V maximum, with absolute maximum supply voltage of 45 V (LM2576) and 57 V (LM2576HV). |
| 2 | Output | output | Switching output that drives the inductor and catch diode; steady-state output voltage to ground is rated at -1 V minimum. |
| 3 | Gnd | power_in | Ground reference pin for the regulator. |
| 4 | Feedback | input | Output voltage feedback input; tied to the output on fixed-voltage versions and to the external divider on the ADJ version, referenced to 1.23 V. |
| 5 | ON/OFF | input | Shutdown control where the regulator is active when low or floating; the pin input voltage is rated from -0.3 V up to +VIN. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (VIN=25V, ILOAD=0.5A) | VOUT | 11.76 | 12 | 12.24 | V | VIN =25V, ILOAD =0.5A, Circuit of Figure 2 | 5 |
| Output voltage (LM2576, 25°C limit) | VOUT | 11.52 | 12 | 12.48 | V | 0.5A ≤ ILOAD ≤ 3A, 15V ≤ VIN ≤ 40V, Circuit of Figure 2 | 5 |
| Output voltage (LM2576, full temperature range) | VOUT | 11.4 | 12.6 | V | Full operating temperature range (bold limit); 0.5A ≤ ILOAD ≤ 3A, 15V ≤ VIN ≤ 40V | 5 | |
| Oscillator frequency (25°C limit) | fO | 47 | 52 | 58 | kHz | Note 8 | 6 |
| Oscillator frequency (full temperature range) | fO | 42 | 63 | kHz | Full operating temperature range (bold limit); Note 8 | 6 | |
| Saturation voltage (25°C limit) | VSAT | 1.4 | 1.8 | V | IOUT =3A (Note 4) | 6 | |
| Saturation voltage (full temperature range) | VSAT | 2 | V | Full operating temperature range (bold limit); IOUT =3A (Note 4) | 6 | ||
| Duty cycle (ON), minimum | DC | 93 | 98 | % | Note 5 | 6 | |
| Current limit (25°C limit) | ICL | 4.2 | 5.8 | 6.9 | A | Notes 4, 8 | 6 |
| Current limit (full temperature range) | ICL | 3.5 | 7.5 | A | Full operating temperature range (bold limit); Notes 4, 8 | 6 | |
| Output leakage current (first listed row) | IL | 7.5 | 30 | mA | Output = -1V, Notes 6, 7 | 6 | |
| Output leakage current (second listed row) | IL | 2 | 30 | mA | Output = -1V, Notes 6, 7 | 6 | |
| Quiescent current | IQ | 5 | 10 | mA | Note 6 | 6 | |
| Standby quiescent current | ISTBY | 50 | 200 | µA | ON/OFF Pin = 5V (OFF) | 6 | |
| ON/OFF logic input high (25°C limit) | VIH | 2.2 | 1.4 | V | VOUT = 0V | 6 | |
| ON/OFF logic input high (full temperature range) | VIH | 2.4 | V | Full operating temperature range (bold limit); VOUT = 0V | 6 | ||
| ON/OFF logic input low (25°C limit) | VIL | 1.2 | 1 | V | VOUT = Nominal Output Voltage | 6 | |
| ON/OFF logic input low (full temperature range) | VIL | 0.8 | V | Full operating temperature range (bold limit); VOUT = Nominal Output Voltage | 6 | ||
| ON/OFF pin input current high | IIH | 12 | 30 | µA | ON/OFF Pin = 5V (OFF) | 6 | |
| ON/OFF pin input current low | IIL | 0 | 10 | µA | ON/OFF Pin = 0V (ON) | 6 | |
| Supply voltage (operating, LM2576) | 40 | V | LM2576 (non-HV) operating ratings | 4 | |||
| Operating junction temperature range | TJ | -40 | 125 | °C | LM2576/LM2576HV | 4 | |
| Maximum supply voltage (LM2576) | 45 | V | LM2576 (non-HV) | 4 | |||
| ON/OFF pin input voltage (lower limit) | -0.3 | V | -0.3V ≤ V ≤ +VIN | 4 | |||
| Output voltage to ground (steady state) | -1 | V | Steady state | 4 | |||
| Minimum ESD rating | 2 | kV | C=100pF, R=1.5 kΩ | 4 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 4 | ||
| Maximum junction temperature | TJ | 150 | °C | 4 | |||
| Lead temperature (soldering, 10 s) | 260 | °C | 10 seconds soldering | 4 |
CAD (KiCad official)
- Symbol:
LM2576S-12-MS - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2576s-12-ms-etched.step/lm2576s-12-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2576s-12-ms.step/lm2576s-12-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (12 pp, sha256
bc60041f4dd916f0, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2576S-12-MS
**MSKSEMI** · Linear Voltage Regulators (LDO) · TO-263-5
LM2576S-12-MS from MSKSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Input supply voltage; the LM2576 operating supply range is 40 V maximum and the LM2576HV is 57 V maximum, with absolute maximum supply voltage of 45 V (LM2576) and 57 V (LM2576HV). |
| 2 | Output | output | Switching output that drives the inductor and catch diode; steady-state output voltage to ground is rated at -1 V minimum. |
| 3 | Gnd | power_in | Ground reference pin for the regulator. |
| 4 | Feedback | input | Output voltage feedback input; tied to the output on fixed-voltage versions and to the external divider on the ADJ version, referenced to 1.23 V. |
| 5 | ON/OFF | input | Shutdown control where the regulator is active when low or floating; the pin input voltage is rated from -0.3 V up to +VIN. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (VIN=25V, ILOAD=0.5A) | VOUT | 11.76 | 12 | 12.24 | V | VIN =25V, ILOAD =0.5A, Circuit of Figure 2 | 5 |
| Output voltage (LM2576, 25°C limit) | VOUT | 11.52 | 12 | 12.48 | V | 0.5A ≤ ILOAD ≤ 3A, 15V ≤ VIN ≤ 40V, Circuit of Figure 2 | 5 |
| Output voltage (LM2576, full temperature range) | VOUT | 11.4 | | 12.6 | V | Full operating temperature range (bold limit); 0.5A ≤ ILOAD ≤ 3A, 15V ≤ VIN ≤ 40V | 5 |
| Oscillator frequency (25°C limit) | fO | 47 | 52 | 58 | kHz | Note 8 | 6 |
| Oscillator frequency (full temperature range) | fO | 42 | | 63 | kHz | Full operating temperature range (bold limit); Note 8 | 6 |
| Saturation voltage (25°C limit) | VSAT | | 1.4 | 1.8 | V | IOUT =3A (Note 4) | 6 |
| Saturation voltage (full temperature range) | VSAT | | | 2 | V | Full operating temperature range (bold limit); IOUT =3A (Note 4) | 6 |
| Duty cycle (ON), minimum | DC | 93 | 98 | | % | Note 5 | 6 |
| Current limit (25°C limit) | ICL | 4.2 | 5.8 | 6.9 | A | Notes 4, 8 | 6 |
| Current limit (full temperature range) | ICL | 3.5 | | 7.5 | A | Full operating temperature range (bold limit); Notes 4, 8 | 6 |
| Output leakage current (first listed row) | IL | | 7.5 | 30 | mA | Output = -1V, Notes 6, 7 | 6 |
| Output leakage current (second listed row) | IL | | 2 | 30 | mA | Output = -1V, Notes 6, 7 | 6 |
| Quiescent current | IQ | | 5 | 10 | mA | Note 6 | 6 |
| Standby quiescent current | ISTBY | | 50 | 200 | µA | ON/OFF Pin = 5V (OFF) | 6 |
| ON/OFF logic input high (25°C limit) | VIH | 2.2 | 1.4 | | V | VOUT = 0V | 6 |
| ON/OFF logic input high (full temperature range) | VIH | 2.4 | | | V | Full operating temperature range (bold limit); VOUT = 0V | 6 |
| ON/OFF logic input low (25°C limit) | VIL | | 1.2 | 1 | V | VOUT = Nominal Output Voltage | 6 |
| ON/OFF logic input low (full temperature range) | VIL | | | 0.8 | V | Full operating temperature range (bold limit); VOUT = Nominal Output Voltage | 6 |
| ON/OFF pin input current high | IIH | | 12 | 30 | µA | ON/OFF Pin = 5V (OFF) | 6 |
| ON/OFF pin input current low | IIL | | 0 | 10 | µA | ON/OFF Pin = 0V (ON) | 6 |
| Supply voltage (operating, LM2576) | | | | 40 | V | LM2576 (non-HV) operating ratings | 4 |
| Operating junction temperature range | TJ | -40 | | 125 | °C | LM2576/LM2576HV | 4 |
| Maximum supply voltage (LM2576) | | | | 45 | V | LM2576 (non-HV) | 4 |
| ON/OFF pin input voltage (lower limit) | | -0.3 | | | V | -0.3V ≤ V ≤ +VIN | 4 |
| Output voltage to ground (steady state) | | -1 | | | V | Steady state | 4 |
| Minimum ESD rating | | 2 | | | kV | C=100pF, R=1.5 kΩ | 4 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 4 |
| Maximum junction temperature | TJ | | | 150 | °C | | 4 |
| Lead temperature (soldering, 10 s) | | | | 260 | °C | 10 seconds soldering | 4 |
## CAD (KiCad official)
- Symbol: `LM2576S-12-MS`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files: `lm2576s-12-ms-etched.step` / `lm2576s-12-ms-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2576s-12-ms.step` / `lm2576s-12-ms.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MSKSEMI datasheet](docs/lm2576s-12-ms-datasheet.pdf) (12 pp, sha256 `bc60041f4dd916f0`, retrieved 2026-11-05, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2576s-12-ms-datasheet.pdf)