main
Ray
Publish 0.1.0
e160005
LM2576-5.0WU
Microchip Tech · DC-DC Converters · TO-263-5
LM2576-5.0WU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input that requires a bypass capacitor to GND, with an operating rating of +40V and an absolute maximum of +45V. |
| 2 | OUTPUT | output | Switch output of the internal 3A switch (saturation voltage 1.4V typ. at IOUT = 3A), with an absolute maximum of -1V to ground. |
| 3 | GND | power_in | Ground pin. |
| 4 | FB | input | Feedback input that is connected to the output on fixed-output versions such as the 5.0V LM2576-5.0 (4.800V to 5.200V output over line and load). |
| 5 | ON/OFF | input | Enable input where logic low enables operation and logic high shuts the regulator down (standby current 50 µA typ. at 5V), with an input range of -0.3V to +40V; do not leave floating. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.9 | 5 | 5.1 | V | VIN = 12V, ILOAD = 0.5A, VOUT = 5.0V | 4 |
| Output voltage LM2576-5.0 | VOUT | 4.8 | 5 | 5.2 | V | 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 40V, VOUT = 5.0V | 4 |
| Output voltage LM2576-5.0 (wide temperature) | VOUT | 4.75 | 5.25 | V | 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 40V, VOUT = 5.0V | 4 | |
| Oscillator Frequency | fO | 47 | 52 | 58 | kHz | 4 | |
| Oscillator Frequency (second row) | fO | 42 | 63 | kHz | 4 | ||
| Saturation Voltage | VSAT | 1.4 | 1.8 | V | IOUT = 3A, Note 3 | 4 | |
| Saturation Voltage (second row) | VSAT | 2 | V | IOUT = 3A, Note 3 | 4 | ||
| Max. Duty Cycle (ON) | DC | 93 | 98 | % | Note 4 | 4 | |
| Current Limit | ILIM | 4.2 | 5.8 | 6.9 | A | Peak current, tON ≤ 3 μs, Note 3 | 4 |
| Current Limit (second row) | ILIM | 3.5 | 7.5 | A | Peak current, tON ≤ 3 μs, Note 3 | 4 | |
| Output Leakage Current | IL | 2 | mA | VIN = 40V, Note 5, Output = 0V | 4 | ||
| Output Leakage Current (Output = -1V) | IL | 30 | mA | Note 5, Output = -1V | 4 | ||
| Quiescent Current | IQ | 5 | 10 | mA | Note 5 | 4 | |
| Standby Quiescent Current | ISTBY | 50 | 200 | μA | ON/OFF Pin = 5V (OFF) | 5 | |
| ON/OFF Pin Logic Input Level (high) | VIH | 2.2 | 1.4 | 2.4 | V | VOUT = 0V | 5 |
| ON/OFF Pin Logic Input Level (low) | VIL | 1 | 1.2 | 0.8 | V | VOUT = 5V | 5 |
| ON/OFF Pin Logic Current (high) | IIH | 4 | 30 | μA | ON/OFF Pin = 5V (OFF) | 5 | |
| ON/OFF Pin Logic Current (low) | IIL | 0.01 | 10 | μA | ON/OFF Pin = 0V (ON) | 5 | |
| Output Leakage Current (typical, Output = -1V) | IL | 7.5 | mA | Output = -1V | 4 | ||
| Efficiency | ɳ | 82 | % | VIN = 12V, ILOAD = 3A, VOUT = 5V | 4 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 6 | |||
| Storage Temperature Range | TS | -65 | 150 | °C | 6 | ||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 6 | |||
| Operating Temperature Range | TA | -40 | 125 | °C | 6 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 65 | °C/W | Junction-to-Ambient, Note 2 | 6 | ||
| Thermal Resistance Junction-to-Ambient (Note 3) | θJA | 45 | °C/W | Junction-to-Ambient, Note 3 | 6 | ||
| Thermal Resistance Junction-to-Case | θJC | 2 | °C/W | Junction-to-Case | 6 | ||
| Maximum Supply Voltage | 45 | V | 4 | ||||
| ON/OFF Pin Input Voltage | V | -0.3 | 40 | V | 4 | ||
| Output Voltage to Ground | -1 | V | 4 | ||||
| ESD Rating | 2 | kV | C = 100 pF, R = 1.5 kΩ | 4 | |||
| ESD Rating FB Pin | 1 | kV | FB Pin | 4 | |||
| Supply Voltage (VIN) | VIN | 40 | V | Operating Ratings | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 2: Junction to ambient thermal resistance (no external heat sink) for the 5-lead TO-220 package mounted vertically, with 1/2" leads in a socket, or on PC board with minimum copper area. | 6 |
CAD (KiCad official)
- Symbol:
LM2576-5.0WU - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2576-5-0wu-etched.step/lm2576-5-0wu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2576-5-0wu.step/lm2576-5-0wu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
c5179beda03b9ff9, retrieved 2026-11-07, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2576-5.0WU
**Microchip Tech** · DC-DC Converters · TO-263-5
LM2576-5.0WU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input that requires a bypass capacitor to GND, with an operating rating of +40V and an absolute maximum of +45V. |
| 2 | OUTPUT | output | Switch output of the internal 3A switch (saturation voltage 1.4V typ. at IOUT = 3A), with an absolute maximum of -1V to ground. |
| 3 | GND | power_in | Ground pin. |
| 4 | FB | input | Feedback input that is connected to the output on fixed-output versions such as the 5.0V LM2576-5.0 (4.800V to 5.200V output over line and load). |
| 5 | ON/OFF | input | Enable input where logic low enables operation and logic high shuts the regulator down (standby current 50 µA typ. at 5V), with an input range of -0.3V to +40V; do not leave floating. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.9 | 5 | 5.1 | V | VIN = 12V, ILOAD = 0.5A, VOUT = 5.0V | 4 |
| Output voltage LM2576-5.0 | VOUT | 4.8 | 5 | 5.2 | V | 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 40V, VOUT = 5.0V | 4 |
| Output voltage LM2576-5.0 (wide temperature) | VOUT | 4.75 | | 5.25 | V | 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 40V, VOUT = 5.0V | 4 |
| Oscillator Frequency | fO | 47 | 52 | 58 | kHz | | 4 |
| Oscillator Frequency (second row) | fO | 42 | | 63 | kHz | | 4 |
| Saturation Voltage | VSAT | | 1.4 | 1.8 | V | IOUT = 3A, Note 3 | 4 |
| Saturation Voltage (second row) | VSAT | | | 2 | V | IOUT = 3A, Note 3 | 4 |
| Max. Duty Cycle (ON) | DC | 93 | 98 | | % | Note 4 | 4 |
| Current Limit | ILIM | 4.2 | 5.8 | 6.9 | A | Peak current, tON ≤ 3 μs, Note 3 | 4 |
| Current Limit (second row) | ILIM | 3.5 | | 7.5 | A | Peak current, tON ≤ 3 μs, Note 3 | 4 |
| Output Leakage Current | IL | | | 2 | mA | VIN = 40V, Note 5, Output = 0V | 4 |
| Output Leakage Current (Output = -1V) | IL | | | 30 | mA | Note 5, Output = -1V | 4 |
| Quiescent Current | IQ | | 5 | 10 | mA | Note 5 | 4 |
| Standby Quiescent Current | ISTBY | | 50 | 200 | μA | ON/OFF Pin = 5V (OFF) | 5 |
| ON/OFF Pin Logic Input Level (high) | VIH | 2.2 | 1.4 | 2.4 | V | VOUT = 0V | 5 |
| ON/OFF Pin Logic Input Level (low) | VIL | 1 | 1.2 | 0.8 | V | VOUT = 5V | 5 |
| ON/OFF Pin Logic Current (high) | IIH | | 4 | 30 | μA | ON/OFF Pin = 5V (OFF) | 5 |
| ON/OFF Pin Logic Current (low) | IIL | | 0.01 | 10 | μA | ON/OFF Pin = 0V (ON) | 5 |
| Output Leakage Current (typical, Output = -1V) | IL | | 7.5 | | mA | Output = -1V | 4 |
| Efficiency | ɳ | | 82 | | % | VIN = 12V, ILOAD = 3A, VOUT = 5V | 4 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 6 |
| Storage Temperature Range | TS | -65 | | 150 | °C | | 6 |
| Lead Temperature | | | | 260 | °C | Soldering, 10 sec. | 6 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 6 |
| Thermal Resistance Junction-to-Ambient | θJA | | 65 | | °C/W | Junction-to-Ambient, Note 2 | 6 |
| Thermal Resistance Junction-to-Ambient (Note 3) | θJA | | 45 | | °C/W | Junction-to-Ambient, Note 3 | 6 |
| Thermal Resistance Junction-to-Case | θJC | | 2 | | °C/W | Junction-to-Case | 6 |
| Maximum Supply Voltage | | | | 45 | V | | 4 |
| ON/OFF Pin Input Voltage | V | -0.3 | | 40 | V | | 4 |
| Output Voltage to Ground | | -1 | | | V | | 4 |
| ESD Rating | | | | 2 | kV | C = 100 pF, R = 1.5 kΩ | 4 |
| ESD Rating FB Pin | | | | 1 | kV | FB Pin | 4 |
| Supply Voltage (VIN) | VIN | | | 40 | V | Operating Ratings | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | 2: Junction to ambient thermal resistance (no external heat sink) for the 5-lead TO-220 package mounted vertically, with 1/2" leads in a socket, or on PC board with minimum copper area. | 6 |
## CAD (KiCad official)
- Symbol: `LM2576-5.0WU`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files: `lm2576-5-0wu-etched.step` / `lm2576-5-0wu-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2576-5-0wu.step` / `lm2576-5-0wu.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/lm2576-5-0wu-datasheet.pdf) (22 pp, sha256 `c5179beda03b9ff9`, retrieved 2026-11-07, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2576-5-0wu-datasheet.pdf)