Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2575S-12-MS

MSKSEMI · Linear Voltage Regulators (LDO) · TO-263-5

LM2575S-12-MS from MSKSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vin power_in Positive input supply for the switching regulator, which needs a suitable input bypass capacitor located close to the pin to limit voltage transients and supply switching currents.
2 Output output Internal switch output that swings between (+VIN − VSAT) and approximately −0.5V at a duty cycle of about VOUT/VIN, so the PCB copper area on this pin should be kept to a minimum.
3 Gnd power_in Circuit ground for the regulator.
4 Feedback input Senses the regulated output voltage to close the feedback loop.
5 ON/OFF input Logic-level shutdown input: pulling below approximately 1.3V turns the regulator on and pulling above 1.3V, up to a maximum of 25V, shuts it down, while leaving it open or wiring it to ground keeps it on.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer MSKSEMI
Package TO-263-5
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 11.4 12 12.6 V 15V ≤ VIN ≤ 40V, 0.2A ≤ ILOAD ≤ 2A 4
Oscillator Frequency fO 110 150 173 kHz 5
Saturation Voltage VSAT 1.16 1.5 V IOUT = 2A (Notes 7, 8) 5
Current Limit Peak Current ICL 3.4 4.5 7.5 A Peak Current (Notes 7, 8) 5
Output Leakage Current IL 50 µA Output = 0V (Notes 7, 9) 5
Output Leakage Current IL 2 30 mA Output = −1V (Note 10) 5
Quiescent Current IQ 5 10 mA (Note 9) 5
Standby Quiescent Current ISTBY 80 250 µA ON/OFF pin = 5V (OFF) (Note 10) 5
ON/OFF Pin Logic Input Threshold Voltage VIH 0.6 V Low (Regulator ON) 5
ON/OFF Pin Logic Input Threshold Voltage VIL 2 V High (Regulator OFF) 5
ON/OFF Pin Input Current IH 5 15 µA VLOGIC = 2.5V (Regulator OFF) 6
ON/OFF Pin Input Current IL 0.02 5 µA VLOGIC = 0.5V (Regulator ON) 6
Thermal Resistance Junction to Case JC 2 ˚C/W TO-220 or TO-263 Package, Junction to Case 5
Thermal Resistance Junction to Ambient JA 50 ˚C/W TO-263 Package, Junction to Ambient (Note 12) 5
Thermal Resistance Junction to Ambient JA 30 ˚C/W TO-263 Package, Junction to Ambient (Note 13) 5
Thermal Resistance Junction to Ambient JA 20 ˚C/W TO-263 Package, Junction to Ambient (Note 14) 5
ON/OFF Pin Input Voltage -0.3 25 V ON/OFF pin 3
Feedback Pin Voltage -0.3 25 V Feedback pin 3
Output Voltage to Ground -1 V Steady State 3
Maximum Supply Voltage 45 V LM2575 3
Storage Temperature Range -65 150 ˚C 3
ESD Susceptibility 2 kV Human Body Model 3
Maximum Junction Temperature TJ 150 ˚C 3
Lead Temperature Vapor Phase 215 ˚C S Package, Vapor Phase (60 sec.) 3
Lead Temperature Infrared 245 ˚C S Package, Infrared (10 sec.) 3
Operating Junction Temperature Range TJ -40 125 ˚C 3
Supply Voltage 40 V LM2575 3

CAD (KiCad official)

  • Symbol: LM2575S-12-MS
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: lm2575s-12-ms-etched.step / lm2575s-12-ms-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2575s-12-ms.step / lm2575s-12-ms.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MSKSEMI datasheet (19 pp, sha256 ba1ba56f85adba0d, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF