main
Ray
Publish 0.3.0
82b293d
LM2575HVS-ADJ
3D generated from the datasheet; KiCad's model does not fit this maker's body.
UMW · DC-DC Converters · TO-263-5
LM2575HVS-ADJ from UMW, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply voltage. Operating range up to 60V for the HV version; absolute maximum 63V. Bypass locally with a low-ESR input capacitor. |
| 2 | Output | power_out | Switching output from the internal power transistor. Drives the external freewheeling (catch) diode and inductor of the buck stage. Rated for 2A load current. |
| 3 | GND | power_in | Ground reference for the regulator. Also serves as the thermal path through the exposed tab of the TO-263 package. |
| 4 | Feedback | input | Output voltage feedback input for the adjustable version. Internal reference VFB = 1.23V typ (1.180-1.280V limits). Connect to the midpoint of the external R1/R2 output divider; feedback bias current is 10 nA typ (100 nA max). |
| 5 | ON/OFF | input | TTL-compatible active-low shutdown input. Logic low or floating enables the regulator (VIL <= 1.2V typ); logic high disables it (VIH >= 1.4V typ), dropping the device to ~50 uA standby current. Do not exceed VIN; input current 12 uA typ at 2.5V. |
| 6 | GND | power_in | Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback voltage (25°C limits) | VFB | 1.193 | 1.23 | 1.267 | V | 15V≤VIN≤40V, 60V(HV), 0.2A≤ILOAD≤2A | 5 |
| Feedback voltage (full operating temperature range limits) | VFB | 1.18 | 1.28 | V | Full operating temperature range; 15V≤VIN≤40V, 60V(HV), 0.2A≤ILOAD≤2A | 5 | |
| Oscillator frequency (25°C limits) | fO | 47 | 52 | 58 | kHz | 6 | |
| Oscillator frequency (full operating temperature range limits) | fO | 42 | 63 | kHz | Full operating temperature range | 6 | |
| Feedback bias current (25°C limit) | IB | 10 | 50 | nA | VFB=1.3V | 6 | |
| Feedback bias current (full operating temperature range limit) | IB | 100 | nA | VFB=1.3V; full operating temperature range | 6 | ||
| Max duty cycle (ON) | DC | 93 | 98 | % | 6 | ||
| Saturation voltage (25°C limit) | VSAT | 1.16 | 1.4 | V | IOUT=2A (Notes 7, 8) | 6 | |
| Saturation voltage (full operating temperature range limit) | VSAT | 1.5 | V | IOUT=2A (Notes 7, 8); full operating temperature range | 6 | ||
| Quiescent current | IQ | 5 | 7.5 | mA | 6 | ||
| Standby quiescent current | ISTBY | 50 | 200 | µA | ON/OFF pin=5V (OFF) | 6 | |
| ON/OFF pin logic input threshold voltage, high (regulator OFF) (25°C limit) | VIH | 2.2 | 1.4 | V | High (Regulator OFF) | 7 | |
| ON/OFF pin logic input threshold voltage, high (regulator OFF) (full operating temperature range limit) | VIH | 2.4 | V | High (Regulator OFF); full operating temperature range | 7 | ||
| ON/OFF pin logic input threshold voltage, low (regulator ON) (25°C limit) | VIL | 1.2 | 1 | V | Low (Regulator ON) | 7 | |
| ON/OFF pin logic input threshold voltage, low (regulator ON) (full operating temperature range limit) | VIL | 0.8 | V | Low (Regulator ON); full operating temperature range | 7 | ||
| ON/OFF pin input current, high | IH | 12 | 30 | µA | VLOGIC=2.5V (Regulator OFF) | 7 | |
| ON/OFF pin input current, low | IL | 0 | 10 | µA | VLOGIC=0.5V (Regulator ON) | 7 | |
| Maximum supply voltage (LM2575HV) | 63 | V | 4 | ||||
| ON/OFF pin input voltage | -0.3 | V | Printed as −0.3 ≤ V ≤ +VIN | 4 | |||
| Output voltage to ground (steady state) | -1 | V | Steady state | 4 | |||
| Storage temperature range | -65 | 150 | °C | 4 | |||
| ESD susceptibility, human body model | 2 | kV | Human body model (Note 2: 100 pF through 1.5 kΩ) | 4 | |||
| Vapor phase soldering (60 sec) | 215 | °C | 60 sec | 4 | |||
| Infrared soldering (10 sec) | 245 | °C | 10 sec | 4 | |||
| T package soldering (10 sec) | 260 | °C | 10 sec | 4 | |||
| Maximum junction temperature | 150 | °C | 4 | ||||
| Operating temperature range (junction) | TJ | -40 | 125 | °C | 4 | ||
| Supply voltage (LM2575HV) | VIN | 60 | V | 4 | |||
| Adjustable output voltage range (HV version) | VOUT | 1.2 | 57 | V | Adjustable version; 57V for HV version | 1 | |
| Junction to case thermal resistance | θJC | 2 | °C/W | TO-220 or TO-263 package | 7 | ||
| TO-263 junction to ambient thermal resistance (Note 12) | θJA | 50 | °C/W | TO-263, 0.5 in² 1 oz. copper (Note 12) | 7 | ||
| TO-263 junction to ambient thermal resistance (Note 13) | θJA | 30 | °C/W | TO-263, 2.5 in² 1 oz. copper, single sided (Note 13) | 7 | ||
| TO-263 junction to ambient thermal resistance (Note 14) | θJA | 20 | °C/W | TO-263, 3 in² double sided (Note 14) | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | leads soldered to a printed circuit board with (1 oz.) copper area of approximately 1 in2 | 8 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM2575HVS-ADJ - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5, generated on the KiCad land (body 8.635 x 10.15 mm, terminals on the pads, 4.575 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm2575hvs-adj-etched.step/lm2575hvs-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2575hvs-adj.step/lm2575hvs-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UMW datasheet (30 pp, sha256
b0c31af439f0b6b9, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# LM2575HVS-ADJ
> 3D generated from the datasheet; KiCad's model does not fit this maker's body.
**UMW** · DC-DC Converters · TO-263-5
LM2575HVS-ADJ from UMW, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply voltage. Operating range up to 60V for the HV version; absolute maximum 63V. Bypass locally with a low-ESR input capacitor. |
| 2 | Output | power_out | Switching output from the internal power transistor. Drives the external freewheeling (catch) diode and inductor of the buck stage. Rated for 2A load current. |
| 3 | GND | power_in | Ground reference for the regulator. Also serves as the thermal path through the exposed tab of the TO-263 package. |
| 4 | Feedback | input | Output voltage feedback input for the adjustable version. Internal reference VFB = 1.23V typ (1.180-1.280V limits). Connect to the midpoint of the external R1/R2 output divider; feedback bias current is 10 nA typ (100 nA max). |
| 5 | ON/OFF | input | TTL-compatible active-low shutdown input. Logic low or floating enables the regulator (VIL <= 1.2V typ); logic high disables it (VIH >= 1.4V typ), dropping the device to ~50 uA standby current. Do not exceed VIN; input current 12 uA typ at 2.5V. |
| 6 | GND | power_in | Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback voltage (25°C limits) | VFB | 1.193 | 1.23 | 1.267 | V | 15V≤VIN≤40V, 60V(HV), 0.2A≤ILOAD≤2A | 5 |
| Feedback voltage (full operating temperature range limits) | VFB | 1.18 | | 1.28 | V | Full operating temperature range; 15V≤VIN≤40V, 60V(HV), 0.2A≤ILOAD≤2A | 5 |
| Oscillator frequency (25°C limits) | fO | 47 | 52 | 58 | kHz | | 6 |
| Oscillator frequency (full operating temperature range limits) | fO | 42 | | 63 | kHz | Full operating temperature range | 6 |
| Feedback bias current (25°C limit) | IB | | 10 | 50 | nA | VFB=1.3V | 6 |
| Feedback bias current (full operating temperature range limit) | IB | | | 100 | nA | VFB=1.3V; full operating temperature range | 6 |
| Max duty cycle (ON) | DC | 93 | 98 | | % | | 6 |
| Saturation voltage (25°C limit) | VSAT | | 1.16 | 1.4 | V | IOUT=2A (Notes 7, 8) | 6 |
| Saturation voltage (full operating temperature range limit) | VSAT | | | 1.5 | V | IOUT=2A (Notes 7, 8); full operating temperature range | 6 |
| Quiescent current | IQ | | 5 | 7.5 | mA | | 6 |
| Standby quiescent current | ISTBY | | 50 | 200 | µA | ON/OFF pin=5V (OFF) | 6 |
| ON/OFF pin logic input threshold voltage, high (regulator OFF) (25°C limit) | VIH | 2.2 | 1.4 | | V | High (Regulator OFF) | 7 |
| ON/OFF pin logic input threshold voltage, high (regulator OFF) (full operating temperature range limit) | VIH | 2.4 | | | V | High (Regulator OFF); full operating temperature range | 7 |
| ON/OFF pin logic input threshold voltage, low (regulator ON) (25°C limit) | VIL | | 1.2 | 1 | V | Low (Regulator ON) | 7 |
| ON/OFF pin logic input threshold voltage, low (regulator ON) (full operating temperature range limit) | VIL | | | 0.8 | V | Low (Regulator ON); full operating temperature range | 7 |
| ON/OFF pin input current, high | IH | | 12 | 30 | µA | VLOGIC=2.5V (Regulator OFF) | 7 |
| ON/OFF pin input current, low | IL | | 0 | 10 | µA | VLOGIC=0.5V (Regulator ON) | 7 |
| Maximum supply voltage (LM2575HV) | | | | 63 | V | | 4 |
| ON/OFF pin input voltage | | -0.3 | | | V | Printed as −0.3 ≤ V ≤ +VIN | 4 |
| Output voltage to ground (steady state) | | -1 | | | V | Steady state | 4 |
| Storage temperature range | | -65 | | 150 | °C | | 4 |
| ESD susceptibility, human body model | | | | 2 | kV | Human body model (Note 2: 100 pF through 1.5 kΩ) | 4 |
| Vapor phase soldering (60 sec) | | | | 215 | °C | 60 sec | 4 |
| Infrared soldering (10 sec) | | | | 245 | °C | 10 sec | 4 |
| T package soldering (10 sec) | | | | 260 | °C | 10 sec | 4 |
| Maximum junction temperature | | | | 150 | °C | | 4 |
| Operating temperature range (junction) | TJ | -40 | | 125 | °C | | 4 |
| Supply voltage (LM2575HV) | VIN | | | 60 | V | | 4 |
| Adjustable output voltage range (HV version) | VOUT | 1.2 | | 57 | V | Adjustable version; 57V for HV version | 1 |
| Junction to case thermal resistance | θJC | | 2 | | °C/W | TO-220 or TO-263 package | 7 |
| TO-263 junction to ambient thermal resistance (Note 12) | θJA | | 50 | | °C/W | TO-263, 0.5 in² 1 oz. copper (Note 12) | 7 |
| TO-263 junction to ambient thermal resistance (Note 13) | θJA | | 30 | | °C/W | TO-263, 2.5 in² 1 oz. copper, single sided (Note 13) | 7 |
| TO-263 junction to ambient thermal resistance (Note 14) | θJA | | 20 | | °C/W | TO-263, 3 in² double sided (Note 14) | 7 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | leads soldered to a printed circuit board with (1 oz.) copper area of approximately 1 in2 | 8 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `LM2575HVS-ADJ`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5, generated on the KiCad land (body 8.635 x 10.15 mm, terminals on the pads, 4.575 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lm2575hvs-adj-etched.step` / `lm2575hvs-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2575hvs-adj.step` / `lm2575hvs-adj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [UMW datasheet](docs/lm2575hvs-adj-datasheet.pdf) (30 pp, sha256 `b0c31af439f0b6b9`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/lm2575hvs-adj-datasheet.pdf)