Generated by kicad-footprint-generator · KiCad file format 20260206
LM2575-5.0WU
Microchip Tech · Pre-ordered MCUs · TO-263-5
LM2575-5.0WU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated supply input, rated for a 40V maximum operating supply voltage with a 45V absolute maximum. |
| 2 | OUT | output | Regulated switch output that drives the external inductor and catch diode; the output voltage to ground must not go below -1V in steady state. |
| 3 | GND | power_in | Circuit ground return; the datasheet recommends single-point grounding or a ground plane for best results. |
| 4 | FB | input | Feedback input that sets the regulated output, with a 1.23V reference and ±2% feedback voltage tolerance on the adjustable version and a 1kV ESD rating on this pin. |
| 5 | ON/OFF | input | External shutdown input with a voltage range of -0.3V to +40V, where driving it high (5V) puts the regulator in standby with 200µA maximum standby quiescent current. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-263-5 |
| Category | Embedded Processors & Controllers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (5V fixed, VIN=12V, ILOAD=0.2A) | VOUT | 4.9 | 5 | 5.1 | V | VIN = 12V, ILOAD = 0.2A, VOUT = 5V | 4 |
| Output Voltage (5V fixed, 0.2A to 1A, 8V to 40V) | VOUT | 4.8 | 5 | 5.2 | V | 0.2A ≤ ILOAD ≤ 1A, 8V ≤ VIN ≤ 40V, VOUT = 5V | 4 |
| Oscillator Frequency | fO | 47 | 52 | 58 | kHz | 5 | |
| Saturation Voltage | VSAT | 0.9 | 1.2 | V | IOUT = 1A (Note 4) | 5 | |
| DC Max Duty Cycle (ON) | 98 | 93 | % | (Note 5) | 5 | ||
| Current Limit | ICL | 1.7 | 2.2 | 3 | A | Peak Current, tON ≤ 3µs (Note 4) | 5 |
| Output Leakage Current | IL | 75 | mA | VIN = 40V, (Note 6), Output = 0V | 5 | ||
| Output Leakage Current | IL | 2 | 30 | mA | VIN = 40V, (Note 6), Output = -1V | 5 | |
| Quiescent Current | IQ | 5 | 10 | mA | (Note 6) | 5 | |
| Standby Quiescent Current | ISTBY | 50 | 200 | µA | ON/OFF Pin = 5V (OFF) | 5 | |
| ON/OFF Pin Logic Input Level (high) | VIH | 2.2 | 1.4 | V | VOUT = 0V | 5 | |
| ON/OFF Pin Logic Input Level (low) | VIL | 1.2 | 1 | V | VOUT = 5V | 5 | |
| ON/OFF Pin Logic Input Current (OFF) | IIH | 4 | 30 | µA | ON/OFF Pin = 5V (OFF) | 5 | |
| ON/OFF Pin Logic Current (ON) | IIL | 0.01 | 10 | µA | ON/OFF Pin = 0V (ON) | 5 | |
| Maximum Supply Voltage | VIN | 45 | V | 4 | |||
| ON/OFF Pin Input Voltage | V | -0.3 | 40 | V | 4 | ||
| Output Voltage to Ground (Steady State) | -1 | V | Steady state | 4 | |||
| Maximum Junction Temperature | 150 | °C | 4 | ||||
| Lead Temperature | 260 | °C | soldering, 10 sec. | 4 | |||
| Storage Temperature | Ts | -65 | 150 | °C | 4 | ||
| Minimum ESD Rating | 2 | kV | C = 100pF, R = 1.5kΩ | 4 | |||
| Minimum ESD Rating (FB pin) | 1 | kV | FB pin | 4 | |||
| Supply Voltage | VIN | 40 | V | 4 | |||
| Junction Temperature Range | TJ | -40 | 125 | °C | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | board containing approximately 4 square inches of copper area surrounding the leads. | 5 |
CAD (KiCad official)
- Symbol:
LM2575-5.0WU - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2575-5-0wu-etched.step/lm2575-5-0wu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2575-5-0wu.step/lm2575-5-0wu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (12 pp, sha256
5694b0ac67ea8123, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).