main
History Download
Ray Publish 0.1.0 b4c4f4a

LM2574HVM-ADJ

Texas Instruments · DC-DC Converters · SOIC-14-300mil

LM2574HVM-ADJ from Texas Instruments, in a SOIC-14-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
2 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
3 FB input Feedback sense input; connect to the midpoint of the feedback divider to set VOUT for the ADJ version.
4 SIG_GND power_in Signal ground, the ground reference for internal references and logic; connect to system ground.
5 ON/OFF input Enable input to the regulator, High = OFF and low = ON; connect to GND to enable and do not leave floating.
6 PWR_GND power_in Power ground; connect to system ground and the ground pins of CIN and COUT, with the path to CIN as short as possible.
7 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
8 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
9 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
10 VIN power_in Supply input to the collector of the high-side transistor; connect to the power supply and input bypass capacitor CIN with a short path to CIN and PWR_GND (recommended up to 60 V for HV version).
11 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
12 OUTPUT output Emitter of the power transistor and switching node; connect to the inductor and the cathode of the external diode.
13 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.
14 NC unconnected No internal connection, but must be soldered to PCB for best heat transfer.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14-300mil
Category Power Supply Chip
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback voltage VFB 1.217 1.23 1.243 V VIN = 12 V, ILOAD = 100 mA 7
Feedback voltage (LM2574HV) VFB 1.193 1.23 1.273 V LM2574HV, 7 V ≤ VIN ≤ 60 V, 0.1 A ≤ ILOAD ≤ 0.5 A, VOUT programmed for 5 V, TJ = 25°C 7
Feedback voltage (LM2574HV) VFB 1.18 1.286 V LM2574HV, 7 V ≤ VIN ≤ 60 V, 0.1 A ≤ ILOAD ≤ 0.5 A, VOUT programmed for 5 V, −40°C ≤ TJ ≤ 125°C 7
Feedback bias current Ib 50 100 nA Adjustable version only, VOUT = 5 V, TJ = 25°C 5
Feedback bias current Ib 500 nA Adjustable version only, VOUT = 5 V, −40°C < TJ < 125°C 5
Oscillator frequency fO 47 52 58 kHz TJ = 25°C 5
Oscillator frequency fO 42 63 kHz −40°C < TJ < 125°C 5
Saturation voltage VSAT 0.9 1.2 V IOUT = 0.5 A, TJ = 25°C 5
Saturation voltage VSAT 1.4 V IOUT = 0.5 A, −40°C < TJ < 125°C 5
Maximum duty cycle (ON) DC 93 98 % Feedback pin removed from output and connected to 0 V 5
Current limit ICL 0.7 1 1.6 A Peak current, TJ = 25°C 5
Current limit ICL 0.65 1.8 A Peak current, −40°C < TJ < 125°C 5
Current output leakage IL 2 mA Output = 0 V 5
Current output leakage IL 7.5 30 mA Output = -1 V 5
Quiescent current IQ 5 10 mA Feedback pin connected to 12 V to force output transistor OFF 5
Standby quiescent current ISTBY 50 200 μA ON/OFF pin = 5 V (OFF) 5
ON/OFF logic input high level VIH 2.2 1.4 V VOUT = 0 V, TJ = 25°C 5
ON/OFF logic input high level VIH 2.4 V VOUT = 0 V, −40°C < TJ < 125°C 5
ON/OFF logic input low level VIL 1 1.2 V VOUT = Nominal output voltage, TJ = 25°C 5
ON/OFF logic input low level VIL 0.8 V VOUT = Nominal output voltage, −40°C < TJ < 125°C 5
ON/OFF pin input current IH 12 30 μA ON/OFF pin = 5 V (OFF) 5
ON/OFF pin input current IIL 0 10 μA ON/OFF pin = 0 V (ON) 5
Efficiency η 77 % VIN = 12 V, VOUT = 5 V, ILOAD = 0.5 A 7
Maximum supply voltage (LM2574HV) 63 V LM2574HV 4
ON/OFF pin input voltage -0.3 V max = VIN 4
Output voltage to ground, steady-state -1 V 4
Lead temperature, soldering 260 °C 10 s 4
Maximum junction temperature 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD, human-body model V(ESD) -2000 2000 V HBM, per ANSI/ESDA/JEDEC JS-001 4
Supply voltage (LM2574HV) 60 V LM2574HV 4
Operating junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 77.1 °C/W NPA (SOIC) 14 pins, 4-layer JEDEC board 4
Junction-to-case (top) thermal resistance RθJC(top) 29.2 °C/W NPA (SOIC) 14 pins 4
Junction-to-board thermal resistance RθJB 33.3 °C/W NPA (SOIC) 14 pins 4
Junction-to-top characterization parameter ψJT 2 °C/W NPA (SOIC) 14 pins 4
Junction-to-board characterization parameter ψJB 32.8 °C/W NPA (SOIC) 14 pins 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper The 8-pin molded PDIP and the 14-pin SOIC package have separate power and signal ground pins. Both ground pins must be soldered directly to wide printed-circuit board copper traces to assure low induc 27

CAD (KiCad official)

  • Symbol: LM2574HVM-ADJ
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14-300mil (KiCad packages3D, STEP)
  • 3D model files: lm2574hvm-adj-etched.step / lm2574hvm-adj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2574hvm-adj.step / lm2574hvm-adj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 fa435809361216e9, retrieved 2026-10-31, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF