component
LM25069PMM-2
Public Made by Adomby adom
Texas Instruments Surge Protection Devices (SPDs), VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 27d ago |
| viewers | 27d ago |
| lm25069pmm-2-etched.glb | 27d ago |
| lm25069pmm-2-etched.step | 27d ago |
| lm25069pmm-2-hero.glb | 27d ago |
| lm25069pmm-2-hero.overlay.json | 27d ago |
| lm25069pmm-2.glb | 27d ago |
| lm25069pmm-2.kicad_mod | 27d ago |
| lm25069pmm-2.kicad_sym | 27d ago |
| lm25069pmm-2.lbr | 27d ago |
| lm25069pmm-2.step | 27d ago |
| package.json | 27d ago |
| page.json | 27d ago |
| README.md | 27d ago |
LM25069PMM-2
Texas Instruments · Surge Protection Devices (SPDs) · VSSOP-10-0.5mm
LM25069PMM-2 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE | input | Current sense input; the voltage across the current sense resistor (RS) is measured from VIN to this pin, and if it reaches 50mV the load current is limited and the fault timer activates. |
| 2 | VIN | power_in | Positive supply input; a small ceramic bypass capacitor close to this pin is recommended to suppress transients that occur when the load current is switched off. |
| 3 | UVLO/EN | input | Under-voltage lockout input; an external resistor divider from the system input sets the turn-on threshold with a 20 µA internal hysteresis current, and the enable threshold at the pin is 1.17V, which can also be used for remote shutdown. |
| 4 | OVLO | input | Over-voltage lockout input; an external resistor divider from the system input sets the turn-off threshold with a 20 µA internal hysteresis current, and the disable threshold at the pin is 1.16V. |
| 5 | GND | power_in | Circuit ground. |
| 6 | TIMER | passive | Timing capacitor connection that sets the insertion time delay and the fault timeout period, and also sets the restart timing of the LM25069-2. |
| 7 | PWR | input | Power limit set; an external resistor on this pin, together with the current sense resistor RS, sets the maximum power dissipation allowed in the external series pass MOSFET. |
| 8 | PGD | output | Open-drain Power Good indicator that goes active high when the external MOSFET VDS decreases below 1.3V and switches low when VDS increases above 1.9V. |
| 9 | OUT | input | Output feedback input connected to the output rail (external MOSFET source), used internally to determine MOSFET VDS for power limiting and to control the PGD indicator. |
| 10 | GATE | output | Gate drive output connected to the external MOSFET gate, with its voltage limited to 19.5V above ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Circuit Protection |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
LM25069PMM-2 - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
lm25069pmm-2-etched.step/lm25069pmm-2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm25069pmm-2.step/lm25069pmm-2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
ed81a1b21e4ba208, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).