← Commit history

Initial commit: component/lm25011myx

Ray ·5dbff5ff81 ·
2 files changed +210
README.mdadded+48
@@ -0,0 +1,48 @@+# LM25011MYX++**Texas Instruments** · DC-DC Converters · MSOP-10-EP++LM25011MYX from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Input supply voltage with operating range 6V to 42V and transient capability up to 45V. |+| 2 | RT | input | On-time control input where external resistor from VIN sets buck switch on-time and switching frequency. |+| 3 | PGD | output | Power Good logic output indicating when FB voltage exceeds 95% of 2.51V reference with 3.3% hysteresis, requires external pull-up resistor to voltage less than 7V. |+| 4 | SS | input | Soft-Start input where internal 10µA current source charges external capacitor to 2.51V. |+| 5 | SGND | power_in | Signal Ground for all internal circuitry except current limit sense circuit. |+| 6 | FB | input | Feedback input to regulation comparator with 2.51V internal reference voltage. |+| 7 | CSG | power_in | Current Sense Ground connection for current limit sensing circuit and current sense resistor. |+| 8 | CS | input | Current Sense input connected to current sense resistor and anode of free-wheeling diode. |+| 9 | SW | output | Switching Node output internally connected to buck switch source, connects to external inductor, free-wheeling diode cathode, and bootstrap capacitor. |+| 10 | BST | power_in | Bootstrap capacitor connection for buck switch gate driver, connect 0.1µF capacitor from SW to BST with internal diode charging during off-time. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10-EP |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `LM25011MYX`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: MSOP-10-EP (KiCad packages3D, STEP)+- 3D model files: `lm25011myx-etched.step` / `lm25011myx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm25011myx.step` / `lm25011myx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm25011) (32 pp, sha256 `cb448b6c7c95f313`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm25011myx-datasheet.pdf)
page.jsonadded+162
@@ -0,0 +1,162 @@+{+  "slug": "lm25011myx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, MSOP-10-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm25011myx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm25011myx.kicad_sym",+    "lm25011myx.kicad_mod",+    "lm25011myx.glb",+    "lm25011myx.step",+    "lm25011myx.lbr",+    "docs/hero.png",+    "docs/lm25011myx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM25011MYX",+    "manufacturer": "Texas Instruments",+    "package": "MSOP-10-EP",+    "pin_count": 11,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm25011",+    "parts": {+      "symbol": "lm25011myx.kicad_sym",+      "footprint": "lm25011myx.kicad_mod",+      "model_3d": "lm25011myx-etched.glb",+      "model_3d_plain": "lm25011myx.glb",+      "model_3d_step": "lm25011myx-etched.step",+      "model_3d_step_plain": "lm25011myx.step",+      "lbr": "lm25011myx.lbr"+    },+    "distributor_links": {+      "lcsc": "C24967"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage with operating range 6V to 42V and transient capability up to 45V."+      },+      {+        "number": "2",+        "name": "RT",+        "type": "input",+        "description": "On-time control input where external resistor from VIN sets buck switch on-time and switching frequency."+      },+      {+        "number": "3",+        "name": "PGD",+        "type": "output",+        "description": "Power Good logic output indicating when FB voltage exceeds 95% of 2.51V reference with 3.3% hysteresis, requires external pull-up resistor to voltage less than 7V."+      },+      {+        "number": "4",+        "name": "SS",+        "type": "input",+        "description": "Soft-Start input where internal 10µA current source charges external capacitor to 2.51V."+      },+      {+        "number": "5",+        "name": "SGND",+        "type": "power_in",+        "description": "Signal Ground for all internal circuitry except current limit sense circuit."+      },+      {+        "number": "6",+        "name": "FB",+        "type": "input",+        "description": "Feedback input to regulation comparator with 2.51V internal reference voltage."+      },+      {+        "number": "7",+        "name": "CSG",+        "type": "power_in",+        "description": "Current Sense Ground connection for current limit sensing circuit and current sense resistor."+      },+      {+        "number": "8",+        "name": "CS",+        "type": "input",+        "description": "Current Sense input connected to current sense resistor and anode of free-wheeling diode."+      },+      {+        "number": "9",+        "name": "SW",+        "type": "output",+        "description": "Switching Node output internally connected to buck switch source, connects to external inductor, free-wheeling diode cathode, and bootstrap capacitor."+      },+      {+        "number": "10",+        "name": "BST",+        "type": "power_in",+        "description": "Bootstrap capacitor connection for buck switch gate driver, connect 0.1µF capacitor from SW to BST with internal diode charging during off-time."+      },+      {+        "number": "11",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 11 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 32,+        "cost_usd": 0.3464,+        "at": "2026-09-22T19:22:00"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm25011",+        "pages": 32,+        "sha256": "cb448b6c7c95f313",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file