component
LM25011MYX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM25011MYX
Texas Instruments · DC-DC Converters · MSOP-10-EP
LM25011MYX from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply voltage with operating range 6V to 42V and transient capability up to 45V. |
| 2 | RT | input | On-time control input where external resistor from VIN sets buck switch on-time and switching frequency. |
| 3 | PGD | output | Power Good logic output indicating when FB voltage exceeds 95% of 2.51V reference with 3.3% hysteresis, requires external pull-up resistor to voltage less than 7V. |
| 4 | SS | input | Soft-Start input where internal 10µA current source charges external capacitor to 2.51V. |
| 5 | SGND | power_in | Signal Ground for all internal circuitry except current limit sense circuit. |
| 6 | FB | input | Feedback input to regulation comparator with 2.51V internal reference voltage. |
| 7 | CSG | power_in | Current Sense Ground connection for current limit sensing circuit and current sense resistor. |
| 8 | CS | input | Current Sense input connected to current sense resistor and anode of free-wheeling diode. |
| 9 | SW | output | Switching Node output internally connected to buck switch source, connects to external inductor, free-wheeling diode cathode, and bootstrap capacitor. |
| 10 | BST | power_in | Bootstrap capacitor connection for buck switch gate driver, connect 0.1µF capacitor from SW to BST with internal diode charging during off-time. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
LM25011MYX - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files:
lm25011myx-etched.step/lm25011myx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm25011myx.step/lm25011myx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
cb448b6c7c95f313, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).