main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm25011my: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm25011my: viewers · Ray
lm25011my-etched.fit.json lm25011my: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm25011my-etched.glb lm25011my: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm25011my-etched.step lm25011my: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm25011my.glb Publish 0.1.0 · Ray
lm25011my.kicad_mod Publish 0.1.0 · Ray
lm25011my.kicad_sym Publish 0.1.0 · Ray
lm25011my.lbr Publish 0.1.0 · Ray
lm25011my.step Publish 0.1.0 · Ray
package.json lm25011my: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lm25011my: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lm25011my · Ray

LM25011MY

Texas Instruments · DC-DC Converters · MSOP-10-EP

LM25011MY from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply voltage with operating range of 6 V to 42 V and 45 V transient capability.
2 RT input On-time control where external resistor from VIN sets buck switch on-time and switching frequency.
3 PGD output Power Good logic output indicating when feedback voltage exceeds 95% of internal 2.51 V reference with 3.3% hysteresis, requires external pull-up resistor to <7 V.
4 SS input Soft-start input charged by internal 10 µA current source to 2.51 V for controlled startup ramp, supports tracking mode with 0.5 V to 2.6 V input range.
5 SGND power_in Signal ground for all internal circuitry except current limit sense circuit.
6 FB input Feedback input to regulation comparator with 2.51 V internal reference level.
7 CSG power_in Current sense ground connection for current limit detection circuit.
8 CS input Current sense input connected to current sense resistor and free-wheeling diode anode.
9 SW output Switching node output internally connected to buck switch source, connects to external inductor, free-wheeling diode cathode, and bootstrap capacitor.
10 BST power_in Bootstrap capacitor supply for high-side gate driver, charged via internal diode during off-time with 0.1 µF external capacitor.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-10-EP
Category Power Management (PMIC)
Pins 11

CAD (KiCad official)

  • Symbol: LM25011MY
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: MSOP-10-EP (KiCad packages3D, STEP)
  • 3D model files: lm25011my-etched.step / lm25011my-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm25011my.step / lm25011my.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 cb448b6c7c95f313, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF