component
LM25011MY
Public Made by Adomby adom
Texas Instruments DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# LM25011MY++**Texas Instruments** · DC-DC Converters · MSOP-10-EP++LM25011MY from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Input supply voltage with operating range of 6 V to 42 V and 45 V transient capability. |+| 2 | RT | input | On-time control where external resistor from VIN sets buck switch on-time and switching frequency. |+| 3 | PGD | output | Power Good logic output indicating when feedback voltage exceeds 95% of internal 2.51 V reference with 3.3% hysteresis, requires external pull-up resistor to <7 V. |+| 4 | SS | input | Soft-start input charged by internal 10 µA current source to 2.51 V for controlled startup ramp, supports tracking mode with 0.5 V to 2.6 V input range. |+| 5 | SGND | power_in | Signal ground for all internal circuitry except current limit sense circuit. |+| 6 | FB | input | Feedback input to regulation comparator with 2.51 V internal reference level. |+| 7 | CSG | power_in | Current sense ground connection for current limit detection circuit. |+| 8 | CS | input | Current sense input connected to current sense resistor and free-wheeling diode anode. |+| 9 | SW | output | Switching node output internally connected to buck switch source, connects to external inductor, free-wheeling diode cathode, and bootstrap capacitor. |+| 10 | BST | power_in | Bootstrap capacitor supply for high-side gate driver, charged via internal diode during off-time with 0.1 µF external capacitor. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10-EP |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `LM25011MY`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: MSOP-10-EP (KiCad packages3D, STEP)+- 3D model files: `lm25011my-etched.step` / `lm25011my-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm25011my.step` / `lm25011my.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm25011) (32 pp, sha256 `cb448b6c7c95f313`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm25011my-datasheet.pdf)
page.jsonadded+175@@ -0,0 +1,175 @@+{+ "slug": "lm25011my",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lm25011my",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm25011my.kicad_sym",+ "lm25011my.kicad_mod",+ "lm25011my.glb",+ "lm25011my.step",+ "lm25011my.lbr",+ "docs/hero.png",+ "docs/lm25011my-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LM25011MY",+ "manufacturer": "Texas Instruments",+ "package": "MSOP-10-EP",+ "pin_count": 11,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm25011",+ "parts": {+ "symbol": "lm25011my.kicad_sym",+ "footprint": "lm25011my.kicad_mod",+ "model_3d": "lm25011my-etched.glb",+ "model_3d_plain": "lm25011my.glb",+ "model_3d_step": "lm25011my-etched.step",+ "model_3d_step_plain": "lm25011my.step",+ "lbr": "lm25011my.lbr"+ },+ "distributor_links": {+ "lcsc": "C408969"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T11:09:09Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage with operating range of 6 V to 42 V and 45 V transient capability."+ },+ {+ "number": "2",+ "name": "RT",+ "type": "input",+ "description": "On-time control where external resistor from VIN sets buck switch on-time and switching frequency."+ },+ {+ "number": "3",+ "name": "PGD",+ "type": "output",+ "description": "Power Good logic output indicating when feedback voltage exceeds 95% of internal 2.51 V reference with 3.3% hysteresis, requires external pull-up resistor to <7 V."+ },+ {+ "number": "4",+ "name": "SS",+ "type": "input",+ "description": "Soft-start input charged by internal 10 µA current source to 2.51 V for controlled startup ramp, supports tracking mode with 0.5 V to 2.6 V input range."+ },+ {+ "number": "5",+ "name": "SGND",+ "type": "power_in",+ "description": "Signal ground for all internal circuitry except current limit sense circuit."+ },+ {+ "number": "6",+ "name": "FB",+ "type": "input",+ "description": "Feedback input to regulation comparator with 2.51 V internal reference level."+ },+ {+ "number": "7",+ "name": "CSG",+ "type": "power_in",+ "description": "Current sense ground connection for current limit detection circuit."+ },+ {+ "number": "8",+ "name": "CS",+ "type": "input",+ "description": "Current sense input connected to current sense resistor and free-wheeling diode anode."+ },+ {+ "number": "9",+ "name": "SW",+ "type": "output",+ "description": "Switching node output internally connected to buck switch source, connects to external inductor, free-wheeling diode cathode, and bootstrap capacitor."+ },+ {+ "number": "10",+ "name": "BST",+ "type": "power_in",+ "description": "Bootstrap capacitor supply for high-side gate driver, charged via internal diode during off-time with 0.1 µF external capacitor."+ },+ {+ "number": "11",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Package hint indicates MSOP-10-EP, but datasheet specifies HVSSOP (DGQ) package for LM25011MY. Confi",+ "exposed pad 11 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 32,+ "cost_usd": 0.3439,+ "at": "2026-09-27T11:08:52"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm25011",+ "pages": 32,+ "sha256": "cb448b6c7c95f313",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 11,+ "described": 11,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}