main
Ray
lm25010mhx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
ebf38a3
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220
{
"slug": "lm25010mhx",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"lm25010mhx",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm25010mhx.kicad_sym",
"lm25010mhx.kicad_mod",
"lm25010mhx.glb",
"lm25010mhx.step",
"lm25010mhx.lbr",
"docs/hero.png",
"docs/lm25010mhx-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "LM25010MHX",
"manufacturer": "Texas Instruments",
"package": "HTSSOP-14-EP",
"pin_count": 15,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm25010-q1",
"parts": {
"symbol": "lm25010mhx.kicad_sym",
"footprint": "lm25010mhx.kicad_mod",
"model_3d": "lm25010mhx-etched.glb",
"model_3d_plain": "lm25010mhx.glb",
"model_3d_step": "lm25010mhx-etched.step",
"model_3d_step_plain": "lm25010mhx.step",
"lbr": "lm25010mhx.lbr"
},
"distributor_links": {
"lcsc": "C2070626"
},
"pins": [
{
"number": "1",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; can be connected to ground plane to improve heat dissipation."
},
{
"number": "2",
"name": "SW",
"type": "output",
"description": "Switching node internally connected to buck switch source; connect to inductor, free-wheeling diode, and bootstrap capacitor."
},
{
"number": "3",
"name": "BST",
"type": "input",
"description": "Bootstrap pin for bootstrap capacitor; capacitor charged from VCC through internal diode during buck switch OFF-time."
},
{
"number": "4",
"name": "ISEN",
"type": "input",
"description": "Current sense input; inductor current flows through internal sense resistor during OFF-time with current limit threshold at 1.25 A typical."
},
{
"number": "5",
"name": "SGND",
"type": "power_in",
"description": "Current sense ground; recirculating current flows into this pin to the internal current sense resistor."
},
{
"number": "6",
"name": "RTN",
"type": "power_in",
"description": "Ground return for all internal circuitry other than the current sense resistor."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; can be connected to ground plane to improve heat dissipation."
},
{
"number": "8",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "9",
"name": "FB",
"type": "input",
"description": "Voltage feedback input from regulated output to regulation and overvoltage comparators with 2.5 V regulation threshold."
},
{
"number": "10",
"name": "SS",
"type": "input",
"description": "Soft start input; internal 11.5 µA current source charges SS capacitor to 2.5 V for gradual output voltage rise."
},
{
"number": "11",
"name": "RON/SD",
"type": "input",
"description": "ON-time control and shutdown; external resistor from VIN sets buck switch ON-time; grounding this pin shuts down regulator."
},
{
"number": "12",
"name": "VCC",
"type": "power_out",
"description": "Bias regulator output nominally equal to VIN for VIN < 8.9 V and regulated at 7 V for VIN > 8.9 V; connect 0.47 µF minimum capacitor to ground."
},
{
"number": "13",
"name": "VIN",
"type": "power_in",
"description": "Input supply with nominal range 6 V to 42 V; input bypass capacitors located close to VIN and RTN pins."
},
{
"number": "14",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "15",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: VCC pin (12) functions as both a bias regulator output and can accept external voltage input for red; ISEN pin (4) and SGND pin (5) comprise a current sense circuit with internal 50 mΩ sense resistor an; NC pins (1, 7, 8, 14) can be connected to ground plane for heat dissipation despite having no intern",
"exposed pad 15 added from the footprint"
],
"pages_sent": 35,
"cost_usd": 0.3488,
"at": "2026-09-24T10:46:28"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm25010-q1",
"pages": 35,
"sha256": "d5d36a8196d36262",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 15,
"described": 15,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm25010mhx.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.35,
5.0,
1.05
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm25010mhx-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.35,
5.0,
1.05
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "61cb9a5519a3b5b71c4270ffd87a496e1e530ce5f14d9d87ed088724ec7b442d",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}