main
Ray Publish 0.1.1 9a48927
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm25010mh",
  "title": "LM25010MH",
  "brief": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "lm25010mh",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM25010MH",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-14-EP",
    "pin_count": 15,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm25010-q1",
    "parts": {
      "symbol": "lm25010mh.kicad_sym",
      "footprint": "lm25010mh.kicad_mod",
      "model_3d": "lm25010mh-hero.glb",
      "model_3d_plain": "lm25010mh.glb",
      "model_3d_step": "lm25010mh-etched.step",
      "model_3d_step_plain": "lm25010mh.step",
      "lbr": "lm25010mh.lbr"
    },
    "distributor_links": {
      "lcsc": "C2862389",
      "digikey": "LM25010MH-ND",
      "mouser": "926-LM25010MH"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T14:22:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LM25010MH-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "926-LM25010MH",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; may be connected to ground plane for heat dissipation."
      },
      {
        "number": "2",
        "name": "SW",
        "type": "output",
        "description": "Switching node connected to buck switch source; internally driven, voltage rating -1.5V to 45V relative to RTN."
      },
      {
        "number": "3",
        "name": "BST",
        "type": "input",
        "description": "Bootstrap pin for gate driver capacitor; connects 0.022µF capacitor from SW, charged from VCC during OFF-time; maximum 59V to RTN, 14V to VCC."
      },
      {
        "number": "4",
        "name": "ISEN",
        "type": "input",
        "description": "Current sense input; inductor current flows out during OFF-time through 130mΩ internal sense resistor; threshold 1.25A typical (1.0A to 1.5A range)."
      },
      {
        "number": "5",
        "name": "SGND",
        "type": "power_in",
        "description": "Current sense ground return; recirculating current flows into this pin to the current sense resistor; maximum ±0.3V relative to RTN."
      },
      {
        "number": "6",
        "name": "RTN",
        "type": "power_in",
        "description": "Reference ground return for all internal circuitry except the current sense resistor; baseline for absolute voltage ratings."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; may be connected to ground plane for heat dissipation."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; may be connected to ground plane for heat dissipation."
      },
      {
        "number": "9",
        "name": "FB",
        "type": "input",
        "description": "Feedback voltage input from regulated output; compared to 2.5V ±2% regulation reference and 2.9V overvoltage threshold; input bias current <1nA."
      },
      {
        "number": "10",
        "name": "SS",
        "type": "input",
        "description": "Soft start capacitor pin; charged by internal 11.5µA current source to 2.5V during startup; voltage rating 4V maximum to RTN."
      },
      {
        "number": "11",
        "name": "RON/SD",
        "type": "input",
        "description": "ON-time control resistor input and shutdown pin; external resistor from VIN sets ON-time; grounding disables regulator with 0.7V threshold and 40mV hysteresis."
      },
      {
        "number": "12",
        "name": "VCC",
        "type": "power_in",
        "description": "Bias regulator output; 6.6V to 7.4V for VIN ≥ 8.9V, tracks VIN ±100mV for VIN < 8.9V; absolute maximum 14V to RTN."
      },
      {
        "number": "13",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage; operating range 6V to 42V nominal; absolute maximum 45V to RTN; input bypass capacitors required."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; may be connected to ground plane for heat dissipation."
      },
      {
        "number": "15",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Exposed pad (EP/thermal pad) is documented in the pin functions table on page 3 but is not assigned ",
          "exposed pad 15 added from the footprint"
        ],
        "pages_sent": 35,
        "cost_usd": 0.3821,
        "at": "2026-09-27T14:22:10"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm25010-q1",
        "pages": 35,
        "sha256": "d5d36a8196d36262",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 15,
        "described": 15,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm25010mh.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm25010mh-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "eb502b2d68a5d4d2774bde543e02b5a632a1a87d5f5c7a0877f157cfd302eae0",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-14-EP",
      "Category": "Power Management (PMIC)",
      "Pins": "15"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm25010mh"
  ],
  "discovery_pitch": "LM25010MH (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm25010mh.kicad_sym",
    "lm25010mh.kicad_mod",
    "lm25010mh.glb",
    "lm25010mh.step",
    "lm25010mh.lbr",
    "docs/hero.png",
    "docs/lm25010mh-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm25010mh-etched.step",
    "lm25010mh-hero.glb",
    "lm25010mh-hero.overlay.json"
  ],
  "visibility": "public",
  "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}