main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm25007mm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm25007mm: viewers · Ray
lm25007mm-etched.fit.json lm25007mm: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
lm25007mm-etched.glb lm25007mm: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
lm25007mm-etched.step lm25007mm: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
lm25007mm-hero.glb lm25007mm: hero from the plain model · Ray
lm25007mm-hero.overlay.json lm25007mm: hero from the plain model · Ray
lm25007mm.glb Publish 0.1.0 · Ray
lm25007mm.kicad_mod Publish 0.1.0 · Ray
lm25007mm.kicad_sym Publish 0.1.0 · Ray
lm25007mm.lbr Publish 0.1.0 · Ray
lm25007mm.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/lm25007mm · Ray

LM25007MM

Texas Instruments · DC-DC Converters · VSSOP-8-0.65mm

LM25007MM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switching Node Power switching node. Connect to the inductor, bootstrap capacitor, and free-wheeling diode.
2 BST passive Boost Bootstrap An external capacitor is required between the BST and the SW pins. A 0.01µF ceramic capacitor is recommended.
3 RCL input Current Limit OFF time programming pin A resistor between this pin and RTN sets the off-time when current limit is detected. The off-time is preset to 17µs if FB = 0V.
4 RTN power_in Circuit Ground
5 FB input Feedback Signal from Regulated Output This pin is connected to the inverting input of the internal regulation comparator. The regulation threshold is 2.5V.
6 RON/SD input On-time set pin A resistor between this pin and VIN sets the switch on-time as a function of Vin. The minimum recommended on-time is 300ns at the maximum input voltage.
7 VCC power_out Output from the internal high voltage bias regulator providing gate drive power for the internal Buck switch. Do not exceed 14V. A local 0.1µF decoupling capacitor is recommended.
8 VIN power_in Input supply voltage with recommended operating range 9V to 42V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LM25007MM
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: lm25007mm-etched.step / lm25007mm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm25007mm.step / lm25007mm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 42720a02bcda1c06, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF