component
LM25007MM
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -60,13 +60,13 @@ "number": "2", "name": "BST", "type": "passive",- "description": "Boost Bootstrap An external capacitor is required between the BST and the SW pins. A 0.01\u00b5F ceramic capacitor is recommended."+ "description": "Boost Bootstrap An external capacitor is required between the BST and the SW pins. A 0.01µF ceramic capacitor is recommended." }, { "number": "3", "name": "RCL", "type": "input",- "description": "Current Limit OFF time programming pin A resistor between this pin and RTN sets the off-time when current limit is detected. The off-time is preset to 17\u00b5s if FB = 0V."+ "description": "Current Limit OFF time programming pin A resistor between this pin and RTN sets the off-time when current limit is detected. The off-time is preset to 17µs if FB = 0V." }, { "number": "4",@@ -90,7 +90,7 @@ "number": "7", "name": "VCC", "type": "power_out",- "description": "Output from the internal high voltage bias regulator providing gate drive power for the internal Buck switch. Do not exceed 14V. A local 0.1\u00b5F decoupling capacitor is recommended."+ "description": "Output from the internal high voltage bias regulator providing gate drive power for the internal Buck switch. Do not exceed 14V. A local 0.1µF decoupling capacitor is recommended." }, { "number": "8",@@ -174,5 +174,8 @@ "docs/lm25007mm-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }