LM248D from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	1OUT	output	Amplifier 1 output; typical peak swing ±13 V at RL = 10 kΩ and short-circuit current ±25 mA at VCC± = ±15 V.
2	1IN-	input	Amplifier 1 inverting input; input voltage magnitude must not exceed the supply voltage or ±18 V for the LM248.
3	1IN+	input	Amplifier 1 non-inverting input; input voltage magnitude must not exceed the supply voltage or ±18 V for the LM248.
4	VCC+	power_in	Positive supply, recommended 4 V to 18 V (absolute maximum 18 V for the LM248).
5	2IN+	input	Amplifier 2 non-inverting input; input voltage magnitude must not exceed the supply voltage or ±18 V for the LM248.
6	2IN-	input	Amplifier 2 inverting input; input voltage magnitude must not exceed the supply voltage or ±18 V for the LM248.
7	2OUT	output	Amplifier 2 output; typical peak swing ±13 V at RL = 10 kΩ and short-circuit current ±25 mA at VCC± = ±15 V.
8	3OUT	output	Amplifier 3 output; typical peak swing ±13 V at RL = 10 kΩ and short-circuit current ±25 mA at VCC± = ±15 V.
9	3IN-	input	Amplifier 3 inverting input; input voltage magnitude must not exceed the supply voltage or ±18 V for the LM248.
10	3IN+	input	Amplifier 3 non-inverting input; input voltage magnitude must not exceed the supply voltage or ±18 V for the LM248.
11	VCC-	power_in	Negative supply, recommended -4 V to -18 V (absolute maximum -18 V for the LM248).
12	4IN+	input	Amplifier 4 non-inverting input; input voltage magnitude must not exceed the supply voltage or ±18 V for the LM248.
13	4IN-	input	Amplifier 4 inverting input; input voltage magnitude must not exceed the supply voltage or ±18 V for the LM248.
14	4OUT	output	Amplifier 4 output; typical peak swing ±13 V at RL = 10 kΩ and short-circuit current ±25 mA at VCC± = ±15 V.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOIC-14
Category	Interface ICs
Pins	14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Input offset voltage	VIO		1	6	mV	VO = 0, 25°C	3
Input offset voltage, full range	VIO			7.5	mV	VO = 0, Full range (-25°C to 85°C)	3
Input offset current	IIO		4	50	nA	VO = 0, 25°C	3
Input offset current, full range	IIO			125	nA	VO = 0, Full range (-25°C to 85°C)	3
Input bias current	IIB		30	200	nA	VO = 0, 25°C	3
Input bias current, full range	IIB			500	nA	VO = 0, Full range (-25°C to 85°C)	3
Common-mode input voltage range	VICR	-12		12	V	Full range	3
Maximum peak output voltage swing	VOM	-12	13	12	V	RL = 10 kΩ, 25°C	3
Maximum peak output voltage swing	VOM	-12		12	V	RL ≥ 10 kΩ, Full range	3
Maximum peak output voltage swing	VOM	-10	12	10	V	RL = 2 kΩ, 25°C	3
Maximum peak output voltage swing	VOM	-10		10	V	RL ≥ 2 kΩ, Full range	3
Large-signal differential voltage amplification	AVD	25	160		V/mV	VO = ±10 V, RL ≥ 2 kΩ, 25°C	3
Large-signal differential voltage amplification, full range	AVD	15			V/mV	VO = ±10 V, RL ≥ 2 kΩ, Full range	3
Input resistance	ri	0.8	2.5		MΩ	25°C (not production tested)	3
Unity-gain bandwidth	B1		1		MHz	AVD = 1, 25°C	3
Phase margin	φm		60		°	AVD = 1, 25°C	3
Common-mode rejection ratio	CMRR	70	90		dB	VIC = VICRmin, VO = 0, 25°C	3
Common-mode rejection ratio, full range	CMRR	70			dB	VIC = VICRmin, VO = 0, Full range	3
Supply-voltage rejection ratio	kSVR	77	96		dB	VCC± = ±9 V to ±15 V, VO = 0, 25°C	3
Supply-voltage rejection ratio, full range	kSVR	77			dB	VCC± = ±9 V to ±15 V, VO = 0, Full range	3
Short-circuit output current	IOS		25		mA	25°C (printed ±25)	3
Supply current (four amplifiers)	ICC		2.4	4.5	mA	No load, VO = 0, 25°C	3
Crosstalk attenuation	VO1/VO2		120		dB	f = 1 Hz to 20 kHz, 25°C	3
Slew rate at unity gain	SR		0.5		V/µs	RL = 2 kΩ, CL = 100 pF, VCC± = ±15 V, TA = 25°C	4
Supply voltage VCC+	VCC+	4		18	V		2
Supply voltage VCC-	VCC-	-4		-18	V		2
Supply voltage VCC+	VCC+			18	V	LM248	2
Supply voltage VCC-	VCC-	-18			V	LM248	2
Differential input voltage	VID	-36		36	V	LM248; printed as 36 V	2
Input voltage (either input)	VI	-18		18	V	LM248; printed as -18 V, not to exceed supply magnitude	2
Operating virtual junction temperature	TJ			150	°C		2
Storage temperature range	Tstg	-65		150	°C		2
Lead temperature 1,6 mm from case for 60 seconds				260	°C	D, N, or NS package	2
Package thermal impedance	θJA			86	°C/W	D package, JESD 51-7	2
Operating free-air temperature	TA	-25		85	°C	LM248 full range	3

CAD (KiCad official)

Symbol: LM248D
Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
3D model: SOIC-14 (KiCad packages3D, STEP)
3D model files: lm248d-etched.step / lm248d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm248d.step / lm248d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (17 pp, sha256 e7fbfd5a73a105e0, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LM248D

Verified LM248D

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README