Generated by kicad-footprint-generator · KiCad file format 20260206
LM239QT
STMicroelectronics · Comparators · QFN-16-EP(3x3)
LM239QT from STMicroelectronics, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC+ | power_in | Positive supply; datasheet gives 2 to 32 V single supply (absolute maximum 36 V). |
| 2 | IN-1 | input | Inverting input of comparator 1; common-mode range 0 to VCC+ - 1.5 V. |
| 3 | NC | unconnected | No internal connection. |
| 4 | IN+1 | input | Non-inverting input of comparator 1; common-mode range 0 to VCC+ - 1.5 V. |
| 5 | IN-2 | input | Inverting input of comparator 2; common-mode range 0 to VCC+ - 1.5 V. |
| 6 | IN+2 | input | Non-inverting input of comparator 2; common-mode range 0 to VCC+ - 1.5 V. |
| 7 | IN-3 | input | Inverting input of comparator 3; common-mode range 0 to VCC+ - 1.5 V. |
| 8 | IN+3 | input | Non-inverting input of comparator 3; common-mode range 0 to VCC+ - 1.5 V. |
| 9 | IN-4 | input | Inverting input of comparator 4; common-mode range 0 to VCC+ - 1.5 V. |
| 10 | NC | unconnected | No internal connection. |
| 11 | IN+4 | input | Non-inverting input of comparator 4; common-mode range 0 to VCC+ - 1.5 V. |
| 12 | VCC- | power_in | Negative supply or ground for single-supply operation. |
| 13 | OUT4 | output | Open-collector output of comparator 4; max output current about 20 mA, 250 mV typ saturation at 4 mA sink. |
| 14 | OUT3 | output | Open-collector output of comparator 3; max output current about 20 mA, 250 mV typ saturation at 4 mA sink. |
| 15 | OUT2 | output | Open-collector output of comparator 2; max output current about 20 mA, 250 mV typ saturation at 4 mA sink. |
| 16 | OUT1 | output | Open-collector output of comparator 1; max output current about 20 mA, 250 mV typ saturation at 4 mA sink. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | QFN-16-EP(3x3) |
| Category | Amplifiers/Comparators |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 1 | 5 | mV | 6 | ||
| Input offset voltage | VIO | 9 | mV | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current | IIO | 5 | 50 | nA | 6 | ||
| Input offset current | IIO | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input bias current (I+ or I-) | IIB | 25 | 250 | nA | 6 | ||
| Input bias current (I+ or I-) | IIB | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Large signal voltage gain | AVD | 50 | 200 | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 V to 11 V | 6 | |
| Supply current (all comparators) | ICC | 1.1 | 2 | mA | VCC = +5 V, no load | 6 | |
| Supply current (all comparators) | ICC | 1.3 | 2.5 | mA | VCC = +30 V, no load | 6 | |
| Input common mode voltage range, upper limit VCC+ - 1.5 V | VICM | 0 | V | VCC = 30 V | 6 | ||
| Input common mode voltage range, upper limit VCC+ - 2 V | VICM | 0 | V | VCC = 30 V, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Low level output voltage | VOL | 250 | 400 | mV | VID = -1 V, ISINK = 4 mA | 6 | |
| Low level output voltage | VOL | 700 | mV | VID = -1 V, ISINK = 4 mA, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| High level output current | IOH | 0.1 | 1 | nA | VCC = Vo = 30 V, VID = 1 V | 6 | |
| High level output current | IOH | 1 | μA | VCC = Vo = 30 V, VID = 1 V, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Output sink current | ISINK | 6 | 16 | mA | VID= 1 V, Vo = 1.5 V | 6 | |
| Supply voltage | VCC | 2 | 32 | V | 5 | ||
| Common mode input voltage range, upper limit VCC+ - 1.5 V | VICM | 0 | V | 5 | |||
| Operating free-air temperature range, LM239 | Toper | -40 | 105 | °C | 5 | ||
| Supply voltage | VCC | 36 | V | Printed as ±18 or 36 V | 4 | ||
| Differential input voltage | VID | -36 | 36 | V | Printed as ±36 V | 4 | |
| Input voltage | VIN | -0.3 | 36 | V | 4 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Junction temperature | Tj | 150 | °C | 4 | |||
| Lead temperature (soldering) | TLEAD | 260 | °C | 10 seconds | 4 | ||
| ESD human body model (HBM) | ESD | 500 | V | HBM, 100 pF / 1.5 kΩ | 4 | ||
| ESD machine model (MM) | ESD | 100 | V | MM, 200 pF | 4 | ||
| ESD charged device model (CDM) | ESD | 1500 | V | CDM | 4 | ||
| Thermal resistance junction to ambient, QFN16 3x3 | Rthja | 45 | °C/W | Typical value | 4 | ||
| Thermal resistance junction to case, QFN16 3x3 | Rthjc | 14 | °C/W | Typical value | 4 | ||
| Response time | tre | 1.3 | μs | RL= 5.1 kΩ connected to VCC+ | 6 | ||
| Large signal response time | trel | 300 | ns | RL= 5.1 kΩ connected to VCC+, V(ref) = +1.4 V | 7 |
CAD (KiCad official)
- Symbol:
LM239QT - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lm239qt-etched.step/lm239qt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm239qt.step/lm239qt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (19 pp, sha256
5adc47258717f516, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).