Generated by kicad-footprint-generator · KiCad file format 20260206
LM239M
HGSEMI · Comparators · SOP-14
LM239M from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | output | Output of comparator 2; the output current is limited to an absolute maximum of 50 mA (ISC). |
| 2 | OUT1 | output | Output of comparator 1; the output current is limited to an absolute maximum of 50 mA (ISC). |
| 3 | Vcc | power_in | Positive supply; recommended 3 V to 32 V single supply or ±1.5 V to ±16 V dual supply, with an absolute maximum of 36 V or ±18 V. |
| 4 | IN1(-) | input | Inverting input of comparator 1; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |
| 5 | IN1(+) | input | Non-inverting input of comparator 1; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |
| 6 | IN2(-) | input | Inverting input of comparator 2; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |
| 7 | IN2(+) | input | Non-inverting input of comparator 2; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |
| 8 | IN3(-) | input | Inverting input of comparator 3; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |
| 9 | IN3(+) | input | Non-inverting input of comparator 3; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |
| 10 | IN4(-) | input | Inverting input of comparator 4; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |
| 11 | IN4(+) | input | Non-inverting input of comparator 4; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |
| 12 | GND | power_in | Ground (地) reference pin for the device. |
| 13 | OUT4 | output | Output of comparator 4; the output current is limited to an absolute maximum of 50 mA (ISC). |
| 14 | OUT3 | output | Output of comparator 3; the output current is limited to an absolute maximum of 50 mA (ISC). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-14 |
| Category | Amplifiers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 3 | 7 | mV | Ta=25℃ | 4 | |
| Input offset voltage | VIO | 9 | mV | -40℃≤Ta≤85℃ | 4 | ||
| Input offset current | IIO | 5 | 50 | nA | Ta=25℃ | 4 | |
| Input offset current | IIO | 150 | nA | -40℃≤Ta≤85℃ | 4 | ||
| Input bias current | IIB | 25 | 250 | nA | Ta=25℃ | 4 | |
| Input bias current | IIB | 400 | nA | -40℃≤Ta≤85℃ | 4 | ||
| Input common-mode voltage range | VICR | 0 | V | Ta=25℃; upper limit printed as Vcc-1.5 | 4 | ||
| Supply current | Icc | 0.8 | 2 | mA | RL=∞ | 4 | |
| Supply current | Icc | 1 | 2.5 | mA | RL=∞, Vcc=30V | 4 | |
| Voltage gain | Gv | 50 | 200 | V/mV | RL 15K, Vcc=15V | 4 | |
| Large-signal response time | tRES | 300 | ns | VIN=TTL logic swing, VREF=1.4V, VRL=5.0V, RL=5.1KΩ | 4 | ||
| Response time | tRES | 1.3 | ns | VRL=5.0V, RL=5.1KΩ | 4 | ||
| Output sink current | ISINK | 6 | 16 | mA | VIN(-)=1.0V, VIN(+)=0V, Vo1.5V | 4 | |
| Output saturation voltage | VSAT | 130 | 400 | mV | VIN(-)=1.0V, VIN(+)=0V, ISINK=4.0mA | 4 | |
| Output saturation voltage | VSAT | 700 | mV | VIN(-)=1.0V, VIN(+)=0V, ISINK=4.0mA, -40℃≤Ta≤85℃ | 4 | ||
| Output leakage current | IOL | 0.1 | nA | VIN(+)=1.0V, VIN(-)=0V, Vo=5.0V | 4 | ||
| Output leakage current | IOL | 1000 | nA | VIN(+)=1.0V, VIN(-)=0V, -40℃≤Ta≤85℃ | 4 | ||
| Supply voltage | Vcc | 36 | V | 36 or ±18 V (single or dual supply) | 3 | ||
| Input differential voltage range | VIDR | 36 | V | 3 | |||
| Input common-mode voltage range | VICMR | -0.3 | V | 3 | |||
| Output current | ISC | 50 | mA | 3 | |||
| Power dissipation | PD | 1 | W | Tamb=25℃; derate 8 mW/℃ above 25℃ | 3 | ||
| Storage temperature | Tstg | -65 | 150 | ℃ | 3 | ||
| Lead temperature | TLEAD | 260 | ℃ | soldering 10 s | 3 | ||
| Supply voltage | Vcc | 3 | 32 | V | single supply | 3 | |
| Supply voltage | Vcc | 1.5 | 16 | V | dual supply, ±1.5 ~ ±16 V as printed | 3 | |
| Operating ambient temperature | Tamb | -40 | 85 | ℃ | LM239 | 3 |
CAD (KiCad official)
- Symbol:
LM239M - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
lm239m-etched.step/lm239m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm239m.step/lm239m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (11 pp, sha256
50c3701751228e5f, retrieved 2026-11-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).