← Commit history
Publish 0.1.1
5 files changed
+475−462
README.md+15−15@@ -8,20 +8,20 @@ LM239M from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OUT2 | output | Output of comparator 2; the absolute maximum output current (ISC) is 50 mA. |-| 2 | OUT1 | output | Output of comparator 1; the absolute maximum output current (ISC) is 50 mA. |-| 3 | Vcc | power_in | Positive supply pin; recommended supply is 3 to 32 V single-supply or ±1.5 to ±16 V dual-supply, with an absolute maximum of 36 V (or ±18 V). |-| 4 | IN1(-) | input | Inverting input of comparator 1; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions. |-| 5 | IN1(+) | input | Non-inverting input of comparator 1; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions. |-| 6 | IN2(-) | input | Inverting input of comparator 2; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions. |-| 7 | IN2(+) | input | Non-inverting input of comparator 2; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions. |-| 8 | IN3(-) | input | Inverting input of comparator 3; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions. |-| 9 | IN3(+) | input | Non-inverting input of comparator 3; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions. |-| 10 | IN4(-) | input | Inverting input of comparator 4; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions. |-| 11 | IN4(+) | input | Non-inverting input of comparator 4; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions. |-| 12 | GND | power_in | Ground reference pin (地) for the device. |-| 13 | OUT4 | output | Output of comparator 4; the absolute maximum output current (ISC) is 50 mA. |-| 14 | OUT3 | output | Output of comparator 3; the absolute maximum output current (ISC) is 50 mA. |+| 1 | OUT2 | output | Output of comparator 2; the output current is limited to an absolute maximum of 50 mA (ISC). |+| 2 | OUT1 | output | Output of comparator 1; the output current is limited to an absolute maximum of 50 mA (ISC). |+| 3 | Vcc | power_in | Positive supply; recommended 3 V to 32 V single supply or ±1.5 V to ±16 V dual supply, with an absolute maximum of 36 V or ±18 V. |+| 4 | IN1(-) | input | Inverting input of comparator 1; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |+| 5 | IN1(+) | input | Non-inverting input of comparator 1; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |+| 6 | IN2(-) | input | Inverting input of comparator 2; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |+| 7 | IN2(+) | input | Non-inverting input of comparator 2; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |+| 8 | IN3(-) | input | Inverting input of comparator 3; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |+| 9 | IN3(+) | input | Non-inverting input of comparator 3; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |+| 10 | IN4(-) | input | Inverting input of comparator 4; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |+| 11 | IN4(+) | input | Non-inverting input of comparator 4; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V. |+| 12 | GND | power_in | Ground (地) reference pin for the device. |+| 13 | OUT4 | output | Output of comparator 4; the output current is limited to an absolute maximum of 50 mA (ISC). |+| 14 | OUT3 | output | Output of comparator 3; the output current is limited to an absolute maximum of 50 mA (ISC). | ## Key specifications @@ -77,7 +77,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [HGSEMI datasheet](docs/lm239m-datasheet.pdf) (11 pp, sha256 `50c3701751228e5f`, retrieved 2026-11-09, tier: lcsc)+- **Datasheet:** [HGSEMI datasheet](docs/lm239m-datasheet.pdf) (11 pp, sha256 `50c3701751228e5f`, retrieved 2026-11-11, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original. - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
lm239m-hero.overlay.json+390−388@@ -1,392 +1,394 @@ {- "spec": "adom-hero 1.4",- "mpn": "LM239M",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 14,- "span_mm": 8.22,- "dash_mm": 0.2055,- "gap_mm": 0.1233,- "pad_stroke_mm": 0.0493- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 7,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 14,- "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 0- }+ "spec": "adom-hero 1.4",+ "mpn": "LM239M",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 14,+ "span_mm": 8.22,+ "dash_mm": 0.2055,+ "gap_mm": 0.1233,+ "pad_stroke_mm": 0.0493 },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "tolerance_mm": 0.658,- "orientation_flipped": false,- "contacts_bbox_mm": [- -3.0,- 3.0,- -4.015,- 4.015- ],- "pads_bbox_mm": [- -3.45,- 3.45,- -4.11,- 4.11- ],- "seating_z_mm": -0.0+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ } },- "sources": {- "glb": "lm239m-etched.glb",- "glb_sha256": "76384ef0804874ca69b6375e4b7b8ff79ec8b8521f99a06eb0ca0fbbec2e0c3c",- "footprint": "lm239m.kicad_mod",- "footprint_sha256": "a885b619b22880c9559522d2bf865b059d80453b95a98defc9e6ceef284da1fc",- "pins": "page.json component.pins",- "pins_sha256": "461e8f51e0d07b29c2336afca5e4b58a139444f6a6128b327ada81b44a61f5e0"- },- "generator": "adom-wiki 1.8.14 (component_hero)",- "labels": [- {- "pad": "1",- "text": "OUT2",- "x": -3.6,- "y": -3.81,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "2",- "text": "OUT1",- "x": -3.6,- "y": -2.54,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "3",- "text": "Vcc",- "x": -3.6,- "y": -1.27,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "4",- "text": "IN1(-)",- "x": -3.6,- "y": 0.0,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "5",- "text": "IN1(+)",- "x": -3.6,- "y": 1.27,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "6",- "text": "IN2(-)",- "x": -3.6,- "y": 2.54,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "7",- "text": "IN2(+)",- "x": -3.6,- "y": 3.81,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "8",- "text": "IN3(-)",- "x": 3.6,- "y": 3.81,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "9",- "text": "IN3(+)",- "x": 3.6,- "y": 2.54,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "10",- "text": "IN4(-)",- "x": 3.6,- "y": 1.27,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "11",- "text": "IN4(+)",- "x": 3.6,- "y": 0.0,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "12",- "text": "GND",- "x": 3.6,- "y": -1.27,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "13",- "text": "OUT4",- "x": 3.6,- "y": -2.54,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "14",- "text": "OUT3",- "x": 3.6,- "y": -3.81,- "align": "left",- "vertical": false,- "h": 0.6- }+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 14,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 0.658,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -4.015,+ 4.015+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -4.11,+ 4.11 ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -2.475,- -3.81- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -2.475,- -2.54- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -2.475,- -1.27- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -2.475,- 0.0- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- -2.475,- 1.27- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- -2.475,- 2.54- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- -2.475,- 3.81- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- 2.475,- 3.81- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "9",- "shape": "roundrect",- "center_mm": [- 2.475,- 2.54- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "10",- "shape": "roundrect",- "center_mm": [- 2.475,- 1.27- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "11",- "shape": "roundrect",- "center_mm": [- 2.475,- 0.0- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "12",- "shape": "roundrect",- "center_mm": [- 2.475,- -1.27- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "13",- "shape": "roundrect",- "center_mm": [- 2.475,- -2.54- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "14",- "shape": "roundrect",- "center_mm": [- 2.475,- -3.81- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- }- ]-}+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "lm239m-etched.glb",+ "glb_sha256": "76384ef0804874ca69b6375e4b7b8ff79ec8b8521f99a06eb0ca0fbbec2e0c3c",+ "footprint": "lm239m.kicad_mod",+ "footprint_sha256": "a885b619b22880c9559522d2bf865b059d80453b95a98defc9e6ceef284da1fc",+ "pins": "page.json component.pins",+ "pins_sha256": "461e8f51e0d07b29c2336afca5e4b58a139444f6a6128b327ada81b44a61f5e0"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "OUT2",+ "x": -3.6,+ "y": -3.81,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "OUT1",+ "x": -3.6,+ "y": -2.54,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "Vcc",+ "x": -3.6,+ "y": -1.27,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "IN1(-)",+ "x": -3.6,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "IN1(+)",+ "x": -3.6,+ "y": 1.27,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "IN2(-)",+ "x": -3.6,+ "y": 2.54,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "IN2(+)",+ "x": -3.6,+ "y": 3.81,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "IN3(-)",+ "x": 3.6,+ "y": 3.81,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "9",+ "text": "IN3(+)",+ "x": 3.6,+ "y": 2.54,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "10",+ "text": "IN4(-)",+ "x": 3.6,+ "y": 1.27,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "11",+ "text": "IN4(+)",+ "x": 3.6,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "12",+ "text": "GND",+ "x": 3.6,+ "y": -1.27,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "13",+ "text": "OUT4",+ "x": 3.6,+ "y": -2.54,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "14",+ "text": "OUT3",+ "x": 3.6,+ "y": -3.81,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -3.81+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -2.54+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.27+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.0+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.27+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 2.54+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 3.81+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 3.81+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 2.54+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.27+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.0+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.27+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -2.54+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -3.81+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
lm239m.lbr+13−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>HGSEMI Comparators, SOP-14. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-14_3.9x8.7mm_P1.27mm"> <description>SOIC-14, 3.9 x 8.7 mm, 1.27 mm pitch</description>@@ -92,6 +92,7 @@ </packages> <symbols> <symbol name="LM239M">+ <description>HGSEMI Comparators, SOP-14. Pinout cross-checked by two models against the datasheet</description> <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/> <wire x1="12.7" y1="10.16" x2="12.7" y2="-10.16" width="0.254" layer="94"/> <wire x1="12.7" y1="-10.16" x2="-12.7" y2="-10.16" width="0.254" layer="94"/>@@ -116,7 +117,7 @@ </symbols> <devicesets> <deviceset name="LM239M" prefix="U">- <description></description>+ <description>HGSEMI Comparators, SOP-14. Pinout cross-checked by two models against the datasheet</description> <gates> <gate name="G$1" symbol="LM239M" x="0" y="0"/> </gates>@@ -138,7 +139,16 @@ <connect gate="G$1" pin="IN3_+" pad="9"/> <connect gate="G$1" pin="IN3_-" pad="8"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="LM239M" constant="no"/>+ <attribute name="MANUFACTURER" value="HGSEMI" constant="no"/>+ <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/668b6a28705e4074a42542075efb9f8a.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/lm239m" constant="no"/>+ <attribute name="MOUSER_PN" value="512-LM239M" constant="no"/>+ <attribute name="LCSC_PN" value="C492107" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
package.json+23−24@@ -1,6 +1,6 @@ { "slug": "lm239m",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "HGSEMI Comparators, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "512-LM239M" }, "distributor_check": {- "checked_at": "2026-11-09T22:07:41Z",+ "checked_at": "2026-11-11T03:28:43Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -61,8 +61,7 @@ }, "mouser": { "pn": "512-LM239M",- "status": "found",- "lifecycle": "Obsolete"+ "status": "found" } }, "pins": [@@ -70,85 +69,85 @@ "number": "1", "name": "OUT2", "type": "output",- "description": "Output of comparator 2; the absolute maximum output current (ISC) is 50 mA."+ "description": "Output of comparator 2; the output current is limited to an absolute maximum of 50 mA (ISC)." }, { "number": "2", "name": "OUT1", "type": "output",- "description": "Output of comparator 1; the absolute maximum output current (ISC) is 50 mA."+ "description": "Output of comparator 1; the output current is limited to an absolute maximum of 50 mA (ISC)." }, { "number": "3", "name": "Vcc", "type": "power_in",- "description": "Positive supply pin; recommended supply is 3 to 32 V single-supply or ±1.5 to ±16 V dual-supply, with an absolute maximum of 36 V (or ±18 V)."+ "description": "Positive supply; recommended 3 V to 32 V single supply or ±1.5 V to ±16 V dual supply, with an absolute maximum of 36 V or ±18 V." }, { "number": "4", "name": "IN1(-)", "type": "input",- "description": "Inverting input of comparator 1; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Inverting input of comparator 1; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "5", "name": "IN1(+)", "type": "input",- "description": "Non-inverting input of comparator 1; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Non-inverting input of comparator 1; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "6", "name": "IN2(-)", "type": "input",- "description": "Inverting input of comparator 2; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Inverting input of comparator 2; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "7", "name": "IN2(+)", "type": "input",- "description": "Non-inverting input of comparator 2; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Non-inverting input of comparator 2; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "8", "name": "IN3(-)", "type": "input",- "description": "Inverting input of comparator 3; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Inverting input of comparator 3; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "9", "name": "IN3(+)", "type": "input",- "description": "Non-inverting input of comparator 3; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Non-inverting input of comparator 3; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "10", "name": "IN4(-)", "type": "input",- "description": "Inverting input of comparator 4; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Inverting input of comparator 4; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "11", "name": "IN4(+)", "type": "input",- "description": "Non-inverting input of comparator 4; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Non-inverting input of comparator 4; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "12", "name": "GND", "type": "power_in",- "description": "Ground reference pin (地) for the device."+ "description": "Ground (地) reference pin for the device." }, { "number": "13", "name": "OUT4", "type": "output",- "description": "Output of comparator 4; the absolute maximum output current (ISC) is 50 mA."+ "description": "Output of comparator 4; the output current is limited to an absolute maximum of 50 mA (ISC)." }, { "number": "14", "name": "OUT3", "type": "output",- "description": "Output of comparator 3; the absolute maximum output current (ISC) is 50 mA."+ "description": "Output of comparator 3; the output current is limited to an absolute maximum of 50 mA (ISC)." } ], "provenance": {@@ -162,11 +161,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The LM239M/TR is ordered in SOP-14 (datasheet ordering table, page 1), so the SOP-14 column of the p; The SOP-14 pin-table column has no NC entries; the two NC rows (pins 8 and 9 in the QSOP/QFN column,; The datasheet does not state per-pin electrical limits beyond the device-level ratings (Vcc, common-"+ "extractor flagged: The datasheet's pin table has multiple package columns; the SOP-14 pinout was taken from the DIP/SOP; No NC pins are listed for the DIP/SOP/TSSOP column, so none are reported for SOP-14.; Ordering table lists LM239M/TR as SOP-14 (tape and reel, 2500 pcs/reel), which matches the MPN LM239" ], "pages_sent": 11,- "cost_usd": 0.0381,- "at": "2026-11-09T22:07:29"+ "cost_usd": 0.0431,+ "at": "2026-11-11T03:28:30" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/668b6a28705e4074a42542075efb9f8a.pdf",@@ -203,7 +202,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",- "checked": "2026-11-09",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -221,8 +220,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "a70f0b59e4177ceb05fd47b54d1a8ab3c7963c26a34b4c9f9ddbeeaa01491f0c",- "checked": "2026-11-09",+ "sha256": "fc170b119047ad3f04a756d8d8d3cdcd394bc3b468de4aa2c6e75ad44761c1cf",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]
page.json+34−32@@ -4,7 +4,7 @@ "slug": "lm239m", "title": "LM239M", "brief": "HGSEMI Comparators, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -35,7 +35,7 @@ "mouser": "512-LM239M" }, "distributor_check": {- "checked_at": "2026-11-09T22:07:41Z",+ "checked_at": "2026-11-11T03:28:43Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -43,8 +43,7 @@ }, "mouser": { "pn": "512-LM239M",- "status": "found",- "lifecycle": "Obsolete"+ "status": "found" } }, "pins": [@@ -52,85 +51,85 @@ "number": "1", "name": "OUT2", "type": "output",- "description": "Output of comparator 2; the absolute maximum output current (ISC) is 50 mA."+ "description": "Output of comparator 2; the output current is limited to an absolute maximum of 50 mA (ISC)." }, { "number": "2", "name": "OUT1", "type": "output",- "description": "Output of comparator 1; the absolute maximum output current (ISC) is 50 mA."+ "description": "Output of comparator 1; the output current is limited to an absolute maximum of 50 mA (ISC)." }, { "number": "3", "name": "Vcc", "type": "power_in",- "description": "Positive supply pin; recommended supply is 3 to 32 V single-supply or ±1.5 to ±16 V dual-supply, with an absolute maximum of 36 V (or ±18 V)."+ "description": "Positive supply; recommended 3 V to 32 V single supply or ±1.5 V to ±16 V dual supply, with an absolute maximum of 36 V or ±18 V." }, { "number": "4", "name": "IN1(-)", "type": "input",- "description": "Inverting input of comparator 1; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Inverting input of comparator 1; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "5", "name": "IN1(+)", "type": "input",- "description": "Non-inverting input of comparator 1; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Non-inverting input of comparator 1; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "6", "name": "IN2(-)", "type": "input",- "description": "Inverting input of comparator 2; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Inverting input of comparator 2; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "7", "name": "IN2(+)", "type": "input",- "description": "Non-inverting input of comparator 2; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Non-inverting input of comparator 2; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "8", "name": "IN3(-)", "type": "input",- "description": "Inverting input of comparator 3; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Inverting input of comparator 3; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "9", "name": "IN3(+)", "type": "input",- "description": "Non-inverting input of comparator 3; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Non-inverting input of comparator 3; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "10", "name": "IN4(-)", "type": "input",- "description": "Inverting input of comparator 4; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Inverting input of comparator 4; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "11", "name": "IN4(+)", "type": "input",- "description": "Non-inverting input of comparator 4; input common-mode range is (V-)-0.1 V to (V+)-2 V under recommended conditions."+ "description": "Non-inverting input of comparator 4; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V." }, { "number": "12", "name": "GND", "type": "power_in",- "description": "Ground reference pin (地) for the device."+ "description": "Ground (地) reference pin for the device." }, { "number": "13", "name": "OUT4", "type": "output",- "description": "Output of comparator 4; the absolute maximum output current (ISC) is 50 mA."+ "description": "Output of comparator 4; the output current is limited to an absolute maximum of 50 mA (ISC)." }, { "number": "14", "name": "OUT3", "type": "output",- "description": "Output of comparator 3; the absolute maximum output current (ISC) is 50 mA."+ "description": "Output of comparator 3; the output current is limited to an absolute maximum of 50 mA (ISC)." } ], "provenance": {@@ -144,11 +143,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The LM239M/TR is ordered in SOP-14 (datasheet ordering table, page 1), so the SOP-14 column of the p; The SOP-14 pin-table column has no NC entries; the two NC rows (pins 8 and 9 in the QSOP/QFN column,; The datasheet does not state per-pin electrical limits beyond the device-level ratings (Vcc, common-"+ "extractor flagged: The datasheet's pin table has multiple package columns; the SOP-14 pinout was taken from the DIP/SOP; No NC pins are listed for the DIP/SOP/TSSOP column, so none are reported for SOP-14.; Ordering table lists LM239M/TR as SOP-14 (tape and reel, 2500 pcs/reel), which matches the MPN LM239" ], "pages_sent": 11,- "cost_usd": 0.0381,- "at": "2026-11-09T22:07:29"+ "cost_usd": 0.0431,+ "at": "2026-11-11T03:28:30" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/668b6a28705e4074a42542075efb9f8a.pdf",@@ -177,15 +176,15 @@ "origin": "footprint origin = pad-pattern centre", "seat": "z = 0", "extents_mm": [- 6.0,+ 6, 8.7, 1.75 ],- "zmin_mm": -0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",- "checked": "2026-11-09",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -196,15 +195,15 @@ "origin": "footprint origin = pad-pattern centre", "seat": "z = 0", "extents_mm": [- 6.0,+ 6, 8.7, 1.75 ],- "zmin_mm": -0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "a70f0b59e4177ceb05fd47b54d1a8ab3c7963c26a34b4c9f9ddbeeaa01491f0c",- "checked": "2026-11-09",+ "sha256": "fc170b119047ad3f04a756d8d8d3cdcd394bc3b468de4aa2c6e75ad44761c1cf",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]@@ -584,5 +583,8 @@ "lm239m-hero.glb", "lm239m-hero.overlay.json", "lm239m-etched.glb"- ]-}+ ],+ "description": "HGSEMI Comparators, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "visibility": "private",+ "org": "adom"+}