LM239ADT

{
 "schema": "adom.pads/1",
 "slug": "lm239adt",
 "footprint": "SOIC-14_3.9x8.7mm_P1.27mm",
 "generated_from": {
  "footprint": "SOIC-14_3.9x8.7mm_P1.27mm@sha256:a885b619b22880c9",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -3.81
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-14_3.9x8.7mm_P1.27mm@sha256:a885b619b22880c9"
 },
 "pad_count": 14,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "Output2",
   "type": "output",
   "description": "Open-collector output of comparator 2. Requires an external pull-up resistor to a positive rail (typ. ≤ Vcc+). Low output saturation voltage 250 mV typ at Isink = 4 mA; sink up to ~20 mA short-circuit to Vcc+.",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "Output1",
   "type": "output",
   "description": "Open-collector output of comparator 1. Requires an external pull-up resistor. Same drive characteristics as Output2.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "VCC+",
   "type": "power_in",
   "description": "Positive supply rail. Single-supply operation 2 to 36 V, or +Vcc in a split ±1 to ±18 V supply. Typ quiescent current 1.1 mA independent of Vcc.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "Inverting input 1",
   "type": "input",
   "description": "Inverting (-) input of comparator 1. Common-mode range includes ground: 0 to (Vcc+ − 1.5) V. Input bias current 25 nA typ; input offset ±1 mV typ (±2 mV max for A grade).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "Non-inverting input 1",
   "type": "input",
   "description": "Non-inverting (+) input of comparator 1. Common-mode range 0 to (Vcc+ − 1.5) V; differential input voltage rating ±36 V.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "Inverting input 2",
   "type": "input",
   "description": "Inverting (-) input of comparator 2. Same electrical characteristics as input 1.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "Non-inverting input 2",
   "type": "input",
   "description": "Non-inverting (+) input of comparator 2.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "Inverting input 3",
   "type": "input",
   "description": "Inverting (-) input of comparator 3.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "Non-inverting input 3",
   "type": "input",
   "description": "Non-inverting (+) input of comparator 3.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "Inverting input 4",
   "type": "input",
   "description": "Inverting (-) input of comparator 4.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "Non-inverting input 4",
   "type": "input",
   "description": "Non-inverting (+) input of comparator 4.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "VCC-",
   "type": "power_in",
   "description": "Negative supply / ground rail. Tie to GND in single-supply operation, or to −Vcc in a split ±1 to ±18 V supply.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "Output4",
   "type": "output",
   "description": "Open-collector output of comparator 4. Requires external pull-up.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "Output3",
   "type": "output",
   "description": "Open-collector output of comparator 3. Requires external pull-up.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}