main
History Download
Ray Publish 0.1.0 a9b6182

LM231AN

Texas Instruments · V/F And F/V Converters · PDIP-8

LM231AN from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IOUT output Current output of the precision current source, which delivers 126 to 144 µA at RS = 14 kΩ for the LM231 with VPIN1 = 0 V, and changes by no more than 1 µA for 0 V ≤ VPIN1 ≤ 10 V.
2 IREF input Reference current input where the voltage is regulated at 1.90 V and the set current i = 1.90 V/RS is usable from 10 µA to 500 µA.
3 FOUT output Frequency output that is an open-collector output and requires a pullup resistor; it saturates with about 50 Ω ON resistance and the output current is actively limited to less than 50 mA in case of overvoltage.
4 GND power_in Ground reference; all voltages are measured with respect to GND = 0 V.
5 RC input R-C filter input connected to the external RtCt timing network, where the timer threshold is specified as 0.63 to 0.7 × VS (0.667 × VS typical).
6 THRESH input Threshold input to the input comparator, which operates with a common-mode range of −0.2 V to VCC − 2 V and an input bias current of −80 to −300 nA.
7 COMPIN input Comparator input which, when its voltage exceeds that on pin 6, sets the internal R-S flip-flop and starts a timing cycle.
8 VS power_in Supply voltage, specified for 4 V to 40 V operation with an absolute maximum of 40 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Data Acquisition
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VFC Non-Linearity, 4.5 V ≤ VS ≤ 20 V -0.01 0.003 0.01 % Full-Scale 4.5 V ≤ VS ≤ 20 V 5
VFC Non-Linearity, TMIN ≤ TA ≤ TMAX -0.02 0.006 0.02 % Full-Scale TMIN ≤ TA ≤ TMAX 5
VFC Non-Linearity in circuit of Figure 14 -0.14 0.024 0.14 % Full-Scale VS = 15 V, f = 10 Hz to 11 kHz 5
Scale Factor (Gain), LM231A 0.95 1 1.05 kHz/V VIN = −10 V, RS = 14 kΩ 5
Temperature Stability of Gain, LMx31A -50 20 50 ppm/°C TMIN ≤ TA ≤ TMAX; 4.5 V ≤ VS ≤ 20 V 5
Change of Gain with VS 0.01 0.1 %/V 4.5 V ≤ VS ≤ 10 V 5
Change of Gain with VS 0.006 0.06 %/V 10 V ≤ VS ≤ 40 V 5
Offset Voltage (input comparator) -10 3 10 mV 5
Offset Voltage, LM231A/LM331A -10 3 10 mV LM231A/LM331A, TMIN ≤ TA ≤ TMAX 5
Bias Current (input comparator) -80 -300 nA 5
Offset Current (input comparator) -100 8 100 nA 5
Common-Mode Range (input comparator) -0.2 V TMIN ≤ TA ≤ TMAX; maximum printed as VCC − 2 V (not numeric) 5
Input Bias Current, Pin 5, all devices -100 10 100 nA VS = 15 V; 0 V ≤ VPIN 5 ≤ 9.9 V 5
Input Bias Current, Pin 5, LM231A 200 500 nA VS = 15 V; VPIN 5 = 10 V 5
VSAT Pin 5 (Reset) VSAT 0.22 0.5 V I = 5 mA 5
Current Source Output Current (Pin 1), LM231A 126 135 144 μA RS = 14 kΩ, VPIN 1 = 0 6
Current Source Change with Voltage 0.2 1 μA 0 V ≤ VPIN 1 ≤ 10 V 6
Current Source OFF Leakage, LM231A 0.02 10 nA Current Source OFF 6
Current Source Leakage, TA = TMAX 2 50 nA TA = TMAX 6
Operating Range of Current 10 500 μA (Typical) 6
Reference Voltage (Pin 2), LM231A 1.76 1.89 2.02 VDC 6
Reference Voltage Stability vs. Temperature -60 60 ppm/°C 6
Reference Voltage Stability vs. Time -0.1 0.1 % 1000 hours 6
Logic Output Saturation Voltage (Pin 3) VSAT 0.15 0.5 V I = 5 mA 6
Logic Output Saturation Voltage (Pin 3) VSAT 0.1 0.4 V I = 3.2 mA (2 TTL Loads), TMIN ≤ TA ≤ TMAX 6
Logic Output OFF Leakage (Pin 3) -1 0.05 1 μA 6
Supply Current, LM231A 2 3 4 mA VS = 5 V 6
Supply Current, LM231A 2.5 4 6 mA VS = 40 V 6
Operating Ambient Temperature, LM231, LM231A -25 85 °C 5
Supply Voltage VS 4 40 V 5
Supply Voltage VS 40 V 4
Input Voltage -0.2 V Maximum printed as +VS (not numeric) 4
Lead Temperature (Soldering, 10 sec.), PDIP 260 °C Soldering, 10 sec. 4
Electrostatic Discharge, Human Body Model V(ESD) -500 500 V Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 4
Package Dissipation 1.25 W At 25°C 6
Junction-to-Ambient Thermal Resistance (PDIP) RθJA 100 °C/W 5

CAD (KiCad official)

  • Symbol: LM231AN
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: lm231an-etched.step / lm231an-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm231an.step / lm231an.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 a5847f55707c2947, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF