main
Ray
Initial commit: component/lm22677tj-adj
b5ab242
LM22677TJ-ADJ
Texas Instruments · DC-DC Converters · TO-263-7
LM22677TJ-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switching output of the regulator that swings from 0 V to VIN during normal operation. |
| 2 | VIN | power_in | Input supply voltage to regulator, rated for operation from 4.5 V to 42 V per recommended operating conditions. |
| 3 | BOOT | input | Bootstrap input providing gate voltage to high-side N-channel MOSFET; connect 10 nF ceramic capacitor between BOOT and SW pins. |
| 4 | GND | power_in | System ground connection and common reference point. |
| 5 | RT/SYNC | input | Oscillator control input for internal frequency adjustment from 200 kHz to 1 MHz with external 25 kΩ to 200 kΩ resistor, or for external clock synchronization. |
| 6 | FB | input | Feedback input to regulator for output voltage regulation; 1.285 V typical reference voltage for ADJ version. |
| 7 | EN | input | Enable input to control regulator startup and shutdown; regulator operates when this pin voltage exceeds 1.6 V typical, with internal 6 µA pullup. |
| 8 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM22677TJ-ADJ - Footprint:
Package_TO_SOT_SMD:TO-263-7_TabPin8 - 3D model: TO-263-7 (KiCad packages3D, STEP)
- 3D model files:
lm22677tj-adj-etched.step/lm22677tj-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm22677tj-adj.step/lm22677tj-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
6fd211789a39f0f1, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM22677TJ-ADJ
**Texas Instruments** · DC-DC Converters · TO-263-7
LM22677TJ-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switching output of the regulator that swings from 0 V to VIN during normal operation. |
| 2 | VIN | power_in | Input supply voltage to regulator, rated for operation from 4.5 V to 42 V per recommended operating conditions. |
| 3 | BOOT | input | Bootstrap input providing gate voltage to high-side N-channel MOSFET; connect 10 nF ceramic capacitor between BOOT and SW pins. |
| 4 | GND | power_in | System ground connection and common reference point. |
| 5 | RT/SYNC | input | Oscillator control input for internal frequency adjustment from 200 kHz to 1 MHz with external 25 kΩ to 200 kΩ resistor, or for external clock synchronization. |
| 6 | FB | input | Feedback input to regulator for output voltage regulation; 1.285 V typical reference voltage for ADJ version. |
| 7 | EN | input | Enable input to control regulator startup and shutdown; regulator operates when this pin voltage exceeds 1.6 V typical, with internal 6 µA pullup. |
| 8 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `LM22677TJ-ADJ`
- Footprint: `Package_TO_SOT_SMD:TO-263-7_TabPin8`
- 3D model: TO-263-7 (KiCad packages3D, STEP)
- 3D model files: `lm22677tj-adj-etched.step` / `lm22677tj-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm22677tj-adj.step` / `lm22677tj-adj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm22677) (30 pp, sha256 `6fd211789a39f0f1`, retrieved 2026-09-24, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm22677tj-adj-datasheet.pdf)