main
Ray
Publish 0.1.0
73a6883
LM22677TJ-5.0
Texas Instruments · DC-DC Converters · TO-263-7
LM22677TJ-5.0 from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switching output of the regulator. |
| 2 | VIN | power_in | Supply input to the regulator; the recommended VIN supply range is 4.5 V to 42 V. |
| 3 | BOOT | input | Bootstrap input that provides the gate voltage for the high-side N-FET. |
| 4 | GND | power_in | Ground input to regulator; system common ground pin. |
| 5 | RT/SYNC | input | Oscillator mode control used to set the switching frequency or synchronize the oscillator; see the Switching Frequency Adjustment and Synchronization section. |
| 6 | FB | input | Feedback input to the regulator. |
| 7 | EN | input | Enable input used to control regulator start-up and shutdown; see the Precision Enable and UVLO section. |
| 8 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 4.925 | 5 | 5.075 | V | VIN = 8 V to 42 V | 5 |
| Feedback Voltage over temperature | VFB | 4.9 | 5.1 | V | VIN = 8 V to 42 V, -40°C ≤ TJ ≤ 125°C | 5 | |
| Quiescent Current | IQ | 6 | mA | VFB = 5 V, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Standby Quiescent Current | ISTDBY | 25 | 40 | µA | EN Pin = 0 V | 5 | |
| Current Limit | ICL | 6 | 7.1 | 8.4 | A | 5 | |
| Current Limit over temperature | ICL | 5.75 | 8.75 | A | -40°C ≤ TJ ≤ 125°C | 5 | |
| Output Leakage Current | IL | 0.2 | 2 | µA | VIN = 42 V, EN Pin = 0 V, VSW = 0 V | 5 | |
| Output Leakage Current (reverse) | IL | 0.1 | 3 | µA | VSW = -1 V | 5 | |
| Switch On-Resistance | RDS(ON) | 0.1 | 0.14 | Ω | 5 | ||
| Switch On-Resistance over temperature | RDS(ON) | 0.2 | Ω | -40°C ≤ TJ ≤ 125°C | 5 | ||
| Oscillator Frequency | fO | 400 | 600 | kHz | -40°C ≤ TJ ≤ 125°C | 5 | |
| Oscillator Frequency (nominal) | fO | 500 | kHz | 5 | |||
| Minimum Off-time | TOFFMIN | 200 | ns | 5 | |||
| Minimum Off-time over temperature | TOFFMIN | 100 | 300 | ns | -40°C ≤ TJ ≤ 125°C | 5 | |
| Enable Threshold Voltage (falling) | VEN | 1.6 | V | Falling | 5 | ||
| Enable Threshold Voltage (falling) over temperature | VEN | 1.3 | 1.9 | V | Falling, -40°C ≤ TJ ≤ 125°C | 5 | |
| Enable Voltage Hysteresis | VENHYST | 0.6 | V | 5 | |||
| Enable Input Current | IEN | 6 | µA | EN Input = 0 V | 5 | ||
| Maximum Synchronization Frequency | FSYNC | 1 | MHz | VSYNC = 3.5 V, 50% duty-cycle | 5 | ||
| Thermal Shutdown Threshold | TSD | 150 | °C | 5 | |||
| VIN to GND | VIN | 43 | V | 4 | |||
| EN Pin Voltage | EN | -0.5 | 6 | V | 4 | ||
| RT/SYNC Pin Voltage | RT/SYNC | -0.5 | 7 | V | 4 | ||
| SW to GND | SW | -5 | V | DC voltage; max = VIN; pulse -10 V up to 50 ns | 4 | ||
| BOOT Pin Voltage | BOOT | 7 | V | referenced to VSW (VSW + 7 V) | 4 | ||
| FB Pin Voltage | FB | -0.5 | 7 | V | 4 | ||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature | Tstg | -65 | 150 | °C | 4 | ||
| VIN Supply Voltage | VIN | 4.5 | 42 | V | 4 | ||
| Junction Temperature (operating) | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 22 | °C/W | package mounted to 1 square inch of copper | 4 |
CAD (KiCad official)
- Symbol:
LM22677TJ-5.0 - Footprint:
Package_TO_SOT_SMD:TO-263-7_TabPin8 - 3D model: TO-263-7 (KiCad packages3D, STEP)
- 3D model files:
lm22677tj-5-0-etched.step/lm22677tj-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm22677tj-5-0.step/lm22677tj-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
8ffab04cc1a854c9, retrieved 2026-10-28, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM22677TJ-5.0
**Texas Instruments** · DC-DC Converters · TO-263-7
LM22677TJ-5.0 from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switching output of the regulator. |
| 2 | VIN | power_in | Supply input to the regulator; the recommended VIN supply range is 4.5 V to 42 V. |
| 3 | BOOT | input | Bootstrap input that provides the gate voltage for the high-side N-FET. |
| 4 | GND | power_in | Ground input to regulator; system common ground pin. |
| 5 | RT/SYNC | input | Oscillator mode control used to set the switching frequency or synchronize the oscillator; see the Switching Frequency Adjustment and Synchronization section. |
| 6 | FB | input | Feedback input to the regulator. |
| 7 | EN | input | Enable input used to control regulator start-up and shutdown; see the Precision Enable and UVLO section. |
| 8 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 4.925 | 5 | 5.075 | V | VIN = 8 V to 42 V | 5 |
| Feedback Voltage over temperature | VFB | 4.9 | | 5.1 | V | VIN = 8 V to 42 V, -40°C ≤ TJ ≤ 125°C | 5 |
| Quiescent Current | IQ | | | 6 | mA | VFB = 5 V, -40°C ≤ TJ ≤ 125°C | 5 |
| Standby Quiescent Current | ISTDBY | | 25 | 40 | µA | EN Pin = 0 V | 5 |
| Current Limit | ICL | 6 | 7.1 | 8.4 | A | | 5 |
| Current Limit over temperature | ICL | 5.75 | | 8.75 | A | -40°C ≤ TJ ≤ 125°C | 5 |
| Output Leakage Current | IL | | 0.2 | 2 | µA | VIN = 42 V, EN Pin = 0 V, VSW = 0 V | 5 |
| Output Leakage Current (reverse) | IL | | 0.1 | 3 | µA | VSW = -1 V | 5 |
| Switch On-Resistance | RDS(ON) | | 0.1 | 0.14 | Ω | | 5 |
| Switch On-Resistance over temperature | RDS(ON) | | | 0.2 | Ω | -40°C ≤ TJ ≤ 125°C | 5 |
| Oscillator Frequency | fO | 400 | | 600 | kHz | -40°C ≤ TJ ≤ 125°C | 5 |
| Oscillator Frequency (nominal) | fO | | 500 | | kHz | | 5 |
| Minimum Off-time | TOFFMIN | | 200 | | ns | | 5 |
| Minimum Off-time over temperature | TOFFMIN | 100 | | 300 | ns | -40°C ≤ TJ ≤ 125°C | 5 |
| Enable Threshold Voltage (falling) | VEN | | 1.6 | | V | Falling | 5 |
| Enable Threshold Voltage (falling) over temperature | VEN | 1.3 | | 1.9 | V | Falling, -40°C ≤ TJ ≤ 125°C | 5 |
| Enable Voltage Hysteresis | VENHYST | | 0.6 | | V | | 5 |
| Enable Input Current | IEN | | 6 | | µA | EN Input = 0 V | 5 |
| Maximum Synchronization Frequency | FSYNC | | | 1 | MHz | VSYNC = 3.5 V, 50% duty-cycle | 5 |
| Thermal Shutdown Threshold | TSD | | 150 | | °C | | 5 |
| VIN to GND | VIN | | | 43 | V | | 4 |
| EN Pin Voltage | EN | -0.5 | | 6 | V | | 4 |
| RT/SYNC Pin Voltage | RT/SYNC | -0.5 | | 7 | V | | 4 |
| SW to GND | SW | -5 | | | V | DC voltage; max = VIN; pulse -10 V up to 50 ns | 4 |
| BOOT Pin Voltage | BOOT | | | 7 | V | referenced to VSW (VSW + 7 V) | 4 |
| FB Pin Voltage | FB | -0.5 | | 7 | V | | 4 |
| Junction Temperature | TJ | | | 150 | °C | | 4 |
| Storage Temperature | Tstg | -65 | | 150 | °C | | 4 |
| VIN Supply Voltage | VIN | 4.5 | | 42 | V | | 4 |
| Junction Temperature (operating) | TJ | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 22 | | °C/W | package mounted to 1 square inch of copper | 4 |
## CAD (KiCad official)
- Symbol: `LM22677TJ-5.0`
- Footprint: `Package_TO_SOT_SMD:TO-263-7_TabPin8`
- 3D model: TO-263-7 (KiCad packages3D, STEP)
- 3D model files: `lm22677tj-5-0-etched.step` / `lm22677tj-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm22677tj-5-0.step` / `lm22677tj-5-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm22677tj-5.0.pdf) (31 pp, sha256 `8ffab04cc1a854c9`, retrieved 2026-10-28, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm22677tj-5-0-datasheet.pdf)